圖片僅供參考
TC7SZ126FU
+物料清單Buffers & Line Drivers
-
製造商東芝
-
製造商部分 #TC7SZ126FU
-
有存貨5242
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
概述
Description
Key features include:
1. High Speed: Capable of achieving fast switching speeds due to its low power consumption and short propagation delay.
2. 3-State Output: Allows the output to be in one of three states: high, low, or high-impedance, enabling multiple devices to share the same output line without interference.
3. Compact Package: Comes in a small, surface-mount package, suitable for space-constrained applications.
4. Low Power Consumption: Offers efficient operation with minimal power draw, ideal for battery-powered devices.
The device is typically used in signal routing, level shifting, and driving capacitive loads, providing reliable performance in various digital applications.
Equivalent
1. 74LVC1G126 from Nexperia or Texas Instruments
2. NC7SZ126 from ON Semiconductor
3. SN74LVC1G126 from Texas Instruments
4. MC74VHC1GT125 from ON Semiconductor
These alternatives offer similar functionality in terms of logic level, voltage range, and power consumption, though packaging and specific electrical characteristics might vary slightly. Always check the datasheets for compatibility in your specific application.
Features
Key features include:
1. Output Enable Control: This feature allows the output to be enabled or disabled, providing flexibility in circuit design.
2. High-Speed Operation: The device offers fast signal processing suitable for high-speed digital systems.
3. Wide Operating Voltage Range: Supports operation from 1.65V to 5.5V.
4. Low Power Consumption: Efficient power usage for extended battery life in portable applications.
5. 3-State Output: Allows direct connection of multiple outputs for bus-oriented applications.
6. Small Package: Available in a compact package, ideal for space-constrained applications.
Overall, the TC7SZ126FU is a versatile and efficient choice for buffering and driving signals in digital electronics.
Pinout
1. Pin 1 (OE - Output Enable): Controls the state of the output. When high, the output is enabled; when low, the output is in a high-impedance state.
2. Pin 2 (A - Input): The input pin that receives the signal to be buffered or driven.
3. Pin 3 (GND - Ground): Connects to the ground of the circuit.
4. Pin 4 (Y - Output): The output pin that delivers the buffered signal.
5. Pin 5 (Vcc - Supply Voltage): Connects to the positive supply voltage.
This buffer/driver is commonly used in digital circuits for signal conditioning and interfacing.