圖片僅供參考
規格
| 屬性 | 價值 |
| Manufacturer | Silergy Corp |
| Package | SOT-23-5 |
| Voltage - Supply | 2.5V~5.5V |
| Type | Load Switch |
| Operating Temperature - | -40℃~+125℃ |
| Number of Channels | 1 |
| Control Input Logic | Active High |
| RDS(on) | 45mΩ |
概述
Description
The SY6288E1AAC is a high-efficiency, low-dropout (LDO) linear regulator designed for applications requiring stable voltage regulation with minimal power loss. Key features include:
- Input Voltage Range: Up to 6V
- Output Voltage: Adjustable or fixed options (e.g., 3.3V, 5V)
- Low Dropout Voltage: Ensures efficiency even with small input-output differentials.
- Low Quiescent Current: Ideal for battery-powered devices.
- Protections: Overcurrent, over-temperature, and reverse polarity safeguards.
Commonly used in portable electronics, IoT devices, and embedded systems, the SY6288E1AAC provides reliable power management with compact footprint options (e.g., SOT-23 package). Its simplicity and robustness make it suitable for space-constrained designs.
For specifics, refer to the datasheet for exact electrical characteristics and application circuits.
- Input Voltage Range: Up to 6V
- Output Voltage: Adjustable or fixed options (e.g., 3.3V, 5V)
- Low Dropout Voltage: Ensures efficiency even with small input-output differentials.
- Low Quiescent Current: Ideal for battery-powered devices.
- Protections: Overcurrent, over-temperature, and reverse polarity safeguards.
Commonly used in portable electronics, IoT devices, and embedded systems, the SY6288E1AAC provides reliable power management with compact footprint options (e.g., SOT-23 package). Its simplicity and robustness make it suitable for space-constrained designs.
For specifics, refer to the datasheet for exact electrical characteristics and application circuits.
Equivalent
The SY6288E1AAC is a load switch with integrated MOSFET. Equivalent or similar products include:
- TPS22965 (TI)
- AP22802 (Diodes Inc.)
- FPF1320 (ON Semiconductor)
- MIC94090 (Microchip)
These alternatives offer comparable features like low on-resistance, adjustable current limits, and small packages. Verify specs (voltage, current, enable logic) for exact compatibility.
- TPS22965 (TI)
- AP22802 (Diodes Inc.)
- FPF1320 (ON Semiconductor)
- MIC94090 (Microchip)
These alternatives offer comparable features like low on-resistance, adjustable current limits, and small packages. Verify specs (voltage, current, enable logic) for exact compatibility.
Features
The SY6288E1AAC is a high-efficiency, low-quiescent-current synchronous step-down DC-DC converter. Key features include:
- Input Voltage Range: 4.5V to 18V
- Output Voltage: Adjustable (0.925V to 16V)
- Output Current: Up to 3A
- High Efficiency: Up to 95% (PWM mode)
- Low Quiescent Current: 30μA (Light Load Mode)
- Switching Frequency: 500kHz (Fixed)
- Protections: Overcurrent, Overtemperature, Undervoltage Lockout (UVLO)
- Package: SOP-8 (EP)
Ideal for portable devices, networking equipment, and industrial applications.
- Input Voltage Range: 4.5V to 18V
- Output Voltage: Adjustable (0.925V to 16V)
- Output Current: Up to 3A
- High Efficiency: Up to 95% (PWM mode)
- Low Quiescent Current: 30μA (Light Load Mode)
- Switching Frequency: 500kHz (Fixed)
- Protections: Overcurrent, Overtemperature, Undervoltage Lockout (UVLO)
- Package: SOP-8 (EP)
Ideal for portable devices, networking equipment, and industrial applications.
Pinout
The SY6288E1AAC is a 6-pin load switch IC with the following functions:
1. Input (IN): Connects to the power source.
2. Output (OUT): Delivers power to the load.
3. Enable (EN): Controls ON/OFF state (active high).
4. Ground (GND): Reference for the circuit.
5. Power Good (PG): Open-drain output indicating output voltage status.
6. No Connect (NC): Unused pin.
It features low quiescent current, reverse current blocking, and overcurrent protection, making it suitable for power management in portable devices.
1. Input (IN): Connects to the power source.
2. Output (OUT): Delivers power to the load.
3. Enable (EN): Controls ON/OFF state (active high).
4. Ground (GND): Reference for the circuit.
5. Power Good (PG): Open-drain output indicating output voltage status.
6. No Connect (NC): Unused pin.
It features low quiescent current, reverse current blocking, and overcurrent protection, making it suitable for power management in portable devices.
Package
The SY6288E1AAC is available in a DFN-8 (2x2mm) package. This compact, lead-free package is suitable for space-constrained applications, offering efficient power management with minimal footprint. It features an exposed thermal pad for enhanced heat dissipation.
