規格
| 屬性 | 價值 |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | Automotive, AEC-Q101 |
| ProductStatus | Active |
| FETType | P-Channel |
| Technology | MOSFET (Metal Oxide) |
| DraintoSourceVoltage(Vdss) | 60 V |
| Current-ContinuousDrain(Id)@25°C | 12A (Ta) |
| DriveVoltage(MaxRdsOnMinRdsOn) | 10V |
| RdsOn(Max)@IdVgs | 180mOhm @ 6A, 10V |
| Vgs(th)(Max)@Id | 4V @ 250µA |
| GateCharge(Qg)(Max)@Vgs | 30 nC @ 10 V |
| Vgs(Max) | ±20V |
| InputCapacitance(Ciss)(Max)@Vds | 750 pF @ 25 V |
| PowerDissipation(Max) | 55W (Tj) |
| OperatingTemperature | -55°C ~ 175°C (TJ) |
| MountingType | Surface Mount |
| SupplierDevicePackage | DPAK |
概述
Description
The SVD2955T4G is likely a component or model number for a specific electronic or semiconductor device, typically found in technical or industrial settings. While precise details about this specific part number are not readily available without more context, such identifiers usually denote transistors, diodes, integrated circuits, or similar components. These parts are used in various applications, including signal processing, switching, amplification, or power regulation.
When dealing with any such component, it is crucial to refer to the manufacturer's datasheet for detailed specifications, including electrical characteristics, pin configurations, typical applications, and any relevant handling precautions. The datasheet provides the necessary information to ensure proper integration and functioning within a circuit. If you are working on a project or repair, confirming the part's compatibility with your specific requirements is essential. For the most accurate information, checking with the manufacturer or a reputable electronics distributor is recommended.
When dealing with any such component, it is crucial to refer to the manufacturer's datasheet for detailed specifications, including electrical characteristics, pin configurations, typical applications, and any relevant handling precautions. The datasheet provides the necessary information to ensure proper integration and functioning within a circuit. If you are working on a project or repair, confirming the part's compatibility with your specific requirements is essential. For the most accurate information, checking with the manufacturer or a reputable electronics distributor is recommended.
Equivalent
The SVD2955T4G is a P-channel MOSFET. Equivalent products include:
1. IRF9540 from Infineon Technologies
2. FQP27P06 from ON Semiconductor
3. STP55PF06 from STMicroelectronics
4. FDP6035P from Fairchild Semiconductor
These equivalents have similar voltage and current characteristics, but always check the datasheets for precise specifications to ensure compatibility with your application.
1. IRF9540 from Infineon Technologies
2. FQP27P06 from ON Semiconductor
3. STP55PF06 from STMicroelectronics
4. FDP6035P from Fairchild Semiconductor
These equivalents have similar voltage and current characteristics, but always check the datasheets for precise specifications to ensure compatibility with your application.
Features
The SVD2955T4G is a type of Schottky diode primarily used for its fast switching capabilities and low forward voltage drop. Here are some of its key features:
1. Low Forward Voltage Drop: Enhances efficiency by reducing power loss during conduction.
2. Fast Switching Speed: Ideal for high-frequency applications, improving performance and efficiency in switching circuits.
3. High Surge Capability: Can handle large current surges, making it suitable for power supply applications.
4. Guard Ring Protection: Enhances reliability by providing protection against voltage spikes.
5. Compact Packaging: Typically available in small surface-mount packages, which is beneficial for space-constrained designs.
6. Wide Operating Temperature Range: Suitable for various environmental conditions, allowing use in diverse applications.
7. Low Reverse Leakage Current: Reduces power loss in reverse bias mode, important for battery-powered devices.
These features make the SVD2955T4G suitable for applications like power supplies, DC-DC converters, and as a rectifier in various electronic devices.
1. Low Forward Voltage Drop: Enhances efficiency by reducing power loss during conduction.
2. Fast Switching Speed: Ideal for high-frequency applications, improving performance and efficiency in switching circuits.
3. High Surge Capability: Can handle large current surges, making it suitable for power supply applications.
4. Guard Ring Protection: Enhances reliability by providing protection against voltage spikes.
5. Compact Packaging: Typically available in small surface-mount packages, which is beneficial for space-constrained designs.
6. Wide Operating Temperature Range: Suitable for various environmental conditions, allowing use in diverse applications.
7. Low Reverse Leakage Current: Reduces power loss in reverse bias mode, important for battery-powered devices.
These features make the SVD2955T4G suitable for applications like power supplies, DC-DC converters, and as a rectifier in various electronic devices.
Pinout
The SVD2955T4G is an N-channel MOSFET. It typically comes in a TO-252 (DPAK) package, which usually has 3 pins. The pins are:
1. Gate (G): This pin is responsible for controlling the MOSFET's switching operation. A voltage applied to the gate allows current to flow from the drain to the source.
2. Drain (D): This is the pin through which the main current flows from the circuit into the MOSFET. It's connected to the load in the typical circuit configuration.
3. Source (S): This pin is the return path for the current flowing from the drain. It's typically connected to the ground or the negative side of the power supply in circuits.
Additionally, there is a metal tab connected to the drain pin, which helps in heat dissipation. The SVD2955T4G is used in applications requiring electronic switching and amplification, mainly due to its efficiency and fast switching capabilities.
1. Gate (G): This pin is responsible for controlling the MOSFET's switching operation. A voltage applied to the gate allows current to flow from the drain to the source.
2. Drain (D): This is the pin through which the main current flows from the circuit into the MOSFET. It's connected to the load in the typical circuit configuration.
3. Source (S): This pin is the return path for the current flowing from the drain. It's typically connected to the ground or the negative side of the power supply in circuits.
Additionally, there is a metal tab connected to the drain pin, which helps in heat dissipation. The SVD2955T4G is used in applications requiring electronic switching and amplification, mainly due to its efficiency and fast switching capabilities.
Manufacturer
The SVD2955T4G is manufactured by ON Semiconductor, a company known for producing semiconductor components. ON Semiconductor, now officially known as onsemi, is an American company that provides a wide range of semiconductor solutions, including energy-efficient power and signal management, logic, discrete, and custom devices for various applications. These applications span across sectors such as automotive, industrial, communications, computing, consumer electronics, and medical. Onsemi is recognized for its focus on energy-efficient innovations and solutions that help reduce global energy use. The company plays a significant role in producing components that contribute to the advancement of technologies like electric vehicles, smart power grids, and next-generation sensors.
Application
The SVD2955T4G is a dual N-channel MOSFET, typically used in applications that demand efficient power management and switching. Its application areas include:
1. Power Supply Units: Enhances efficiency in DC-DC converters.
2. Motor Drives: Used in controlling speed and direction in motor applications.
3. LED Lighting: Manages power delivery for LED systems.
4. Battery-Powered Devices: Optimizes power consumption in portable electronics.
5. Switching Regulators: Improves performance in voltage regulation circuits.
6. Load Switches: Used in on/off control of power loads.
Its low on-resistance and efficient thermal management make it suitable for high-frequency applications.
1. Power Supply Units: Enhances efficiency in DC-DC converters.
2. Motor Drives: Used in controlling speed and direction in motor applications.
3. LED Lighting: Manages power delivery for LED systems.
4. Battery-Powered Devices: Optimizes power consumption in portable electronics.
5. Switching Regulators: Improves performance in voltage regulation circuits.
6. Load Switches: Used in on/off control of power loads.
Its low on-resistance and efficient thermal management make it suitable for high-frequency applications.
Package
The SVD2955T4G is typically available in a surface-mount package known as SOT-223. This type of packaging is used for semiconductor devices and is designed for efficient heat dissipation and easy soldering on printed circuit boards.
