STM32WL55JCI6

圖片僅供參考

STM32WL55JCI6

+物料清單

MULTIPROTOCOL LPWAN 32-BIT ARM?C

  • 製造商意法半導體

  • 製造商部分 #STM32WL55JCI6

  • 包裹 UFBGA-73

  • 有存貨194

365 天品質保證

7*24 小時服務保證

90-日售後保障

正品保證

規格

屬性 價值
Supplier STMicroelectronics
Package Tray
Series STM32WL
ProductStatus Active
Type TxRx + MCU
RFFamily/Standard 802.15.4
Protocol LoRaWAN 1.0, Sigfox
Modulation BPSK, GFSK, GMSK, FSK, MSK
Frequency 150MHz ~ 960MHz
DataRate(Max) 300kbps
Power-Output 22dBm
Sensitivity -148dBm
MemorySize 256kB Flash
SerialInterfaces ADC, GPIO, I²C, SPI, IrDA, UART, USART
GPIO 43
Voltage-Supply 1.8V ~ 3.6V
Current-Receiving 4.82mA
Current-Transmitting 21mA ~ 120mA
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 73-UFBGA

概述

Description

STM32WL55JCI6 is a single‑chip STM32WL microcontroller from STMicroelectronics that combines an ARM Cortex‑M4 MCU with an integrated sub‑GHz RF transceiver. It targets ultra‑low‑power, long‑range IoT applications and supports sub‑GHz wireless modes (LoRa, FSK, GFSK, OOK) in bands like 868/915 MHz for LoRaWAN or private networks. The MCU runs up to about 64 MHz, with on‑chip flash and RAM, plus standard STM32 peripherals (GPIO, timers, ADC/DAC, UART/SPI/I2C) and a hardware crypto engine with RNG for security. It offers secure boot and protection features. Development is supported by STM32CubeWL, LoRaWAN stacks, and common IDEs (CubeIDE, Keil, IAR). Typical uses include battery‑powered sensors, asset tracking, smart metering, and industrial automation that require long‑range communication with low power. The device simplifies wireless design by combining MCU and RF in one package, reducing BOM and footprint.

Features

Key features of STM32WL55JCI6:
- MCU: ARM Cortex-M4 core with FPU/DSP, up to 64 MHz.
- Wireless: integrated sub-GHz RF transceiver (LoRa/FSK/OOK); bands 868/915 MHz; programmable RF parameters; up to +20 dBm TX; LoRaWAN-ready.
- Memory: up to 256 KB Flash and 64 KB RAM.
- Security: hardware crypto accelerators (AES-128/256, SHA-2), RNG, secure boot and secure firmware update.
- Peripherals: broad mix including GPIO, multiple timers, ADC (12-bit), DAC, USART/UART, I2C, SPI, DMA.
- Power: ultra-low-power design with multiple sleep modes; wide operating voltage 1.65–3.6 V.
- Package options: available in LQFP and UFBGA variants to fit space needs.
- Software: STM32CubeWL with LoRaWAN stack and radio driver support, plus ST development tools.

Pinout

- Pin count: 100 pins (LQFP-100 package).
- Function: STM32WL55JCI6 is a single-chip 32‑bit MCU (ARM Cortex‑M4) with an integrated sub‑GHz RF transceiver (LoRa/FSK/Sigfox) for wireless IoT applications, plus memory and peripherals.

Manufacturer

- Manufacturer: STMicroelectronics (STMicroelectronics N.V.)
- What kind of company: A Franco-Italian multinational semiconductor company and one of the world’s largest, designing and manufacturing microcontrollers (including STM32), MEMS/sensors, analog and power devices, and other semiconductor products.

Application

STM32WL55JCI6 combines a Cortex-M4 MCU with a sub-GHz LoRa/FSK radio, ideal for IoT/LPWAN with long range and low power. Key application areas:
- Smart metering (gas, electric, water)
- Asset tracking and logistics
- Industrial automation and predictive maintenance
- Agriculture and environmental sensing
- Smart city/building automation (lighting, security, remote control)
- Telemetry and remote monitoring of infrastructure
- Wireless sensor networks and distributed sensing
Note: leverages LoRa/FSK for flexible long-range communication with embedded security features.

Package

LQFP-64 package (64‑pin), about 7×7 mm.

與STM32WL55JCI6相關的產品