規格
| 屬性 | 價值 |
| Supplier | STMicroelectronics |
| Package | Tray |
| Series | STM32G4 |
| ProductStatus | Active |
| CoreProcessor | ARM® Cortex®-M4F |
| CoreSize | 32-Bit Single-Core |
| Speed | 170MHz |
| Connectivity | CANbus, I²C, IrDA, LINbus, QSPI, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT |
| NumberofI/O | 52 |
| ProgramMemorySize | 256KB (256K x 8) |
| ProgramMemoryType | FLASH |
| RAMSize | 128K x 8 |
| Voltage-Supply(Vcc/Vdd) | 1.71V ~ 3.6V |
| DataConverters | A/D 26x12b; D/A 7x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 125°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 64-LQFP |
概述
Description
STM32G474RCT3 is a 32‑bit MCU from STMicroelectronics’ STM32G4 family, based on the ARM Cortex‑M4F core (DSP instructions and single‑precision FPU). It’s aimed at motor control and mixed‑signal applications, offering a good balance of performance, peripherals, and energy efficiency.
Typical features (high level):
- Cortex‑M4F core with DSP and FPU
- Advanced timers (including motor‑control/PWM)
- Analog peripherals: ADCs, DACs, op‑amps, comparators
- Communications: USB Full‑Speed, CAN, USART/UART, SPI, I2C
- DMA and memory protection (and often CRC/security features)
- On‑chip Flash and RAM (sizes vary by exact part)
- 48‑pin package (RC variant) and specified operating temperature range
For exact Flash/RAM sizes, pinout, and electrical specs, see the STM32G474RCT3 datasheet and reference manual on ST’s website.
Typical features (high level):
- Cortex‑M4F core with DSP and FPU
- Advanced timers (including motor‑control/PWM)
- Analog peripherals: ADCs, DACs, op‑amps, comparators
- Communications: USB Full‑Speed, CAN, USART/UART, SPI, I2C
- DMA and memory protection (and often CRC/security features)
- On‑chip Flash and RAM (sizes vary by exact part)
- 48‑pin package (RC variant) and specified operating temperature range
For exact Flash/RAM sizes, pinout, and electrical specs, see the STM32G474RCT3 datasheet and reference manual on ST’s website.
Features
Key features of STM32G474RCT3 (G4 series):
- Core: 32-bit ARM Cortex-M4F with FPU and DSP instructions
- Speed: up to 80 MHz CPU frequency
- Memory (depends on device variant): up to ~256 KB Flash and up to ~64 KB RAM
- Analog: multiple 12-bit ADCs (up to ~3 Msps total), 1x 12-bit DAC; integrated op-amps and comparators
- Timers: general-purpose and advanced-control PWM timers for motor control and timing applications
- DMA and memory: DMA controller for peripherals; efficient data transfers
- Security and math: hardware CRC, RNG; cryptographic acceleration (AES/TW)
- Communications: USART/UART, I2C, SPI; USB Full-Speed (where available); CAN (where supported by variant)
- Power and range: operates from 1.65–3.6 V; multiple low-power modes
- Temperature: typically -40 °C to +105 °C
- Development: ST HAL/LL libraries, STM32CubeMX, STM32CubeIDE support
Note: exact Flash/RAM, peripheral counts, and available interfaces can vary by package variant (RCT3) and device configuration.
- Core: 32-bit ARM Cortex-M4F with FPU and DSP instructions
- Speed: up to 80 MHz CPU frequency
- Memory (depends on device variant): up to ~256 KB Flash and up to ~64 KB RAM
- Analog: multiple 12-bit ADCs (up to ~3 Msps total), 1x 12-bit DAC; integrated op-amps and comparators
- Timers: general-purpose and advanced-control PWM timers for motor control and timing applications
- DMA and memory: DMA controller for peripherals; efficient data transfers
- Security and math: hardware CRC, RNG; cryptographic acceleration (AES/TW)
- Communications: USART/UART, I2C, SPI; USB Full-Speed (where available); CAN (where supported by variant)
- Power and range: operates from 1.65–3.6 V; multiple low-power modes
- Temperature: typically -40 °C to +105 °C
- Development: ST HAL/LL libraries, STM32CubeMX, STM32CubeIDE support
Note: exact Flash/RAM, peripheral counts, and available interfaces can vary by package variant (RCT3) and device configuration.
Pinout
Pin count: 100 pins (LQFP-100 package).
Function: 32‑bit STM32G474 microcontroller in the Cortex‑M4 family (ARM Cortex‑M4 core with DSP/FPU and integrated peripherals for embedded control).
Function: 32‑bit STM32G474 microcontroller in the Cortex‑M4 family (ARM Cortex‑M4 core with DSP/FPU and integrated peripherals for embedded control).
Manufacturer
- Manufacturer: STMicroelectronics (ST)
- What kind of company: A multinational semiconductor company that designs and manufactures integrated circuits and electronic components (including microcontrollers), headquartered in Geneva, Switzerland.
- What kind of company: A multinational semiconductor company that designs and manufactures integrated circuits and electronic components (including microcontrollers), headquartered in Geneva, Switzerland.
Application
STM32G474RCT3 is part of ST’s G4 family (Cortex-M4F) with strong mixed-signal and DSP capabilities. Common application areas include:
- Motor control and drive (BLDC/PMSM) using high-resolution timers and fast analog peripherals
- Digital power and power-supply control (SMPS, inverters) with precise ADC/DAC feedback
- Industrial automation and process control (PID loops, sensors, actuators)
- Audio/voice processing and USB audio devices
- USB connectivity and HID/CDC devices
- Human–machine interfaces and display controllers (touch sensing, GUI, LCDs)
- Sensor measurement and instrumentation (multichannel ADCs, op-amps, comparators)
- Motor control and drive (BLDC/PMSM) using high-resolution timers and fast analog peripherals
- Digital power and power-supply control (SMPS, inverters) with precise ADC/DAC feedback
- Industrial automation and process control (PID loops, sensors, actuators)
- Audio/voice processing and USB audio devices
- USB connectivity and HID/CDC devices
- Human–machine interfaces and display controllers (touch sensing, GUI, LCDs)
- Sensor measurement and instrumentation (multichannel ADCs, op-amps, comparators)
Package
LQFP-64 (Quad Flat Package) – 64 pins, typically 10×10 mm body, 0.5 mm pitch.
