規格
| 屬性 | 價值 |
| Supplier | STMicroelectronics |
| Package | Tray |
| Series | STM32F7 |
| ProductStatus | Active |
| CoreProcessor | ARM® Cortex®-M7 |
| CoreSize | 32-Bit Single-Core |
| Speed | 216MHz |
| Connectivity | CANbus, EBI/EMI, Ethernet, I²C, IrDA, LINbus, MMC/SD/SDIO, QSPI, SAI, SPDIF, SPI, UART/USART, USB OTG |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT |
| NumberofI/O | 168 |
| ProgramMemorySize | 1MB (1M x 8) |
| ProgramMemoryType | FLASH |
| RAMSize | 512K x 8 |
| Voltage-Supply(Vcc/Vdd) | 1.7V ~ 3.6V |
| DataConverters | A/D 24x12b; D/A 2x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 216-TFBGA |
概述
Description
STM32F767NGH6 is a high‑performance MCU from ST’s STM32F7 family. It uses an ARM Cortex‑M7 core at up to 216 MHz, with a single‑precision FPU and I/D data caches for strong DSP and real‑time control.
Memory: up to 2 MB Flash and about 320 KB RAM on‑chip (plus optional external memory interfaces on some packages).
Peripherals: USB OTG (FS/HS), Ethernet MAC, CAN, multiple SPI/I2C/UART, SDIO, rich timers and PWM, ADCs, DACs, TFT LCD controller with DCMI camera interface, and flexible memory interfaces (FMC/SRAM).
Features: supports high‑end media, motor control, and embedded compute with broad I/O and bus options; power/clocking designed for low‑power modes while preserving peak performance.
Development: supported by STM32CubeMX/HAL/LL, with common toolchains (Keil, IAR, GCC) and IDEs.
Note: NGH6 specifies a particular package/pin count; verify the exact package features in the datasheet for your variant.
Memory: up to 2 MB Flash and about 320 KB RAM on‑chip (plus optional external memory interfaces on some packages).
Peripherals: USB OTG (FS/HS), Ethernet MAC, CAN, multiple SPI/I2C/UART, SDIO, rich timers and PWM, ADCs, DACs, TFT LCD controller with DCMI camera interface, and flexible memory interfaces (FMC/SRAM).
Features: supports high‑end media, motor control, and embedded compute with broad I/O and bus options; power/clocking designed for low‑power modes while preserving peak performance.
Development: supported by STM32CubeMX/HAL/LL, with common toolchains (Keil, IAR, GCC) and IDEs.
Note: NGH6 specifies a particular package/pin count; verify the exact package features in the datasheet for your variant.
Features
Key features of STM32F767NGH6 (brief):
- CPU: ARM Cortex-M7 core up to 216 MHz with single-precision FPU and DSP instructions.
- Memory: up to 2 MB Flash; up to ~512 KB SRAM.
- Memory access: ART Accelerator with I-cache and D-cache.
- Peripherals: USB 2.0 OTG (FS), Ethernet MAC (IEEE 802.3), CAN, I2C, SPI, USART/LPUART, SDIO.
- Graphics/media: LCD-TFT controller (LTDC) with DMA2D for graphics.
- ADC/DAC: 3× 12-bit ADCs (up to several MSPS).
- Timers: advanced TIM1/8, general-purpose TIM2–TIM5, basic TIM6/7.
- External memory: FSMC/FMC and Quad-SPI interfaces.
- Security/crypto: hardware CRYP (AES/DES/TDES), HASH (SHA1/256), RNG.
- DMA: DMA controller with DMAMUX for high-throughput peripherals.
- Package/IO: typically 176-pin LQFP variant (NGH6); operates 1.7–3.6 V; industrial temp range (-40 to 85 °C).
- Development: full HAL/LL support and ecosystem tools.
- CPU: ARM Cortex-M7 core up to 216 MHz with single-precision FPU and DSP instructions.
- Memory: up to 2 MB Flash; up to ~512 KB SRAM.
- Memory access: ART Accelerator with I-cache and D-cache.
- Peripherals: USB 2.0 OTG (FS), Ethernet MAC (IEEE 802.3), CAN, I2C, SPI, USART/LPUART, SDIO.
- Graphics/media: LCD-TFT controller (LTDC) with DMA2D for graphics.
- ADC/DAC: 3× 12-bit ADCs (up to several MSPS).
- Timers: advanced TIM1/8, general-purpose TIM2–TIM5, basic TIM6/7.
- External memory: FSMC/FMC and Quad-SPI interfaces.
- Security/crypto: hardware CRYP (AES/DES/TDES), HASH (SHA1/256), RNG.
- DMA: DMA controller with DMAMUX for high-throughput peripherals.
- Package/IO: typically 176-pin LQFP variant (NGH6); operates 1.7–3.6 V; industrial temp range (-40 to 85 °C).
- Development: full HAL/LL support and ecosystem tools.
Pinout
- Pin count: 176-pin LQFP (QFP-176)
- Function: STMicroelectronics STM32F767NGH6 is a 32-bit microcontroller from the STM32F7 family, powered by an ARM Cortex-M7 core for embedded applications (with rich peripherals such as USB, Ethernet, CAN, SDIO, etc.).
- Function: STMicroelectronics STM32F767NGH6 is a 32-bit microcontroller from the STM32F7 family, powered by an ARM Cortex-M7 core for embedded applications (with rich peripherals such as USB, Ethernet, CAN, SDIO, etc.).
Manufacturer
- Manufacturer: STMicroelectronics (ST)
- What kind of company: STMicroelectronics is a multinational semiconductor company (electronics) headquartered in Geneva, Switzerland, designing, manufacturing and selling a wide range of ICs and sensors, including the STM32 microcontroller family.
- What kind of company: STMicroelectronics is a multinational semiconductor company (electronics) headquartered in Geneva, Switzerland, designing, manufacturing and selling a wide range of ICs and sensors, including the STM32 microcontroller family.
Application
STM32F767NGH6 is a high-performance MCU (Cortex-M7 up to 216 MHz) suited for:
- HMI and graphics on TFT LCDs
- Industrial automation and motor control
- Audio/video processing and multimedia devices
- IoT gateways, edge computing, smart buildings/energy monitoring
- Instrumentation, data acquisition and test equipment
- Consumer electronics, wearables and portable devices
- Medical devices and handheld instrumentation
- HMI and graphics on TFT LCDs
- Industrial automation and motor control
- Audio/video processing and multimedia devices
- IoT gateways, edge computing, smart buildings/energy monitoring
- Instrumentation, data acquisition and test equipment
- Consumer electronics, wearables and portable devices
- Medical devices and handheld instrumentation
Package
LQFP-144 (14×14 mm) plastic quad flat package.
