規格
| 屬性 | 價值 |
| Supplier | STMicroelectronics |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Series | STM32F0 |
| Part Status | Active |
| Core Processor | ARM® Cortex®-M0 |
| Core Size | 32-Bit Single-Core |
| Speed | 48MHz |
| Connectivity | I²C, IrDA, LINbus, SPI, UART/USART |
| Peripherals | DMA, PDR, POR, PVD, PWM, Temp Sensor, WDT |
| Number of I/O | 55 |
| Program Memory Size | 64KB (64K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V ~ 3.6V |
| Data Converters | A/D 19x12b; D/A 1x12b |
| Oscillator Type | Internal |
| Operating Temperature | -40°C ~ 105°C (TA) |
| Mounting Type | Surface Mount |
概述
Description
STM32F051R8T7TR is an STMicroelectronics MCU from the STM32F0 family. It targets low‑cost, low‑power embedded applications and uses a 32‑bit ARM Cortex‑M0 core running up to 48 MHz. It combines on‑chip flash and RAM with a broad peripheral set (GPIO, timers, ADC, and serial interfaces such as USART/SPI/I2C; USB device is available on applicable SKUs). The “R8T7” suffix denotes a 64‑pin LQFP package, while “TR” typically indicates tape‑and‑reel packaging. The device supports multiple power modes and standard development tools (STM32CubeMX, HAL/LL libraries). Use cases include simple control tasks, peripheral interfacing, USB device applications, and compact IoT nodes. For exact flash and RAM sizes and the precise peripheral list, consult the official datasheet for the F051R8T7TR variant.
Features
Key features of STM32F051R8T7TR (STMicroelectronics):
- 32-bit ARM Cortex-M0 CPU, up to 48 MHz
- Memory: 64 KB Flash, 8 KB RAM
- USB Full-Speed device interface (12 Mbps) with on-chip PHY
- 12-bit ADC (up to ~9 channels), up to 1 Msps
- Timers: multiple 16-bit general-purpose and basic timers
- Communication peripherals: USART/UART, SPI, I2C
- DMA controller for peripherals and memory transfers
- Clocks: HSI/LSE/HSE inputs with flexible clocking, RTC with 32.768 kHz LSE
- Low-power modes: Sleep, Stop, Standby
- Secure boot/option bytes and watchdogs (IWDG/WWDG)
- I/O: numerous GPIOs, SWD debug interface
- Operating voltage: 2.0–3.6 V
- Package: LQFP48 (TR indicates tape-and-reel packaging)
Note: exact peripheral counts may vary by subfamily; refer to datasheet for precise pinout and capabilities.
- 32-bit ARM Cortex-M0 CPU, up to 48 MHz
- Memory: 64 KB Flash, 8 KB RAM
- USB Full-Speed device interface (12 Mbps) with on-chip PHY
- 12-bit ADC (up to ~9 channels), up to 1 Msps
- Timers: multiple 16-bit general-purpose and basic timers
- Communication peripherals: USART/UART, SPI, I2C
- DMA controller for peripherals and memory transfers
- Clocks: HSI/LSE/HSE inputs with flexible clocking, RTC with 32.768 kHz LSE
- Low-power modes: Sleep, Stop, Standby
- Secure boot/option bytes and watchdogs (IWDG/WWDG)
- I/O: numerous GPIOs, SWD debug interface
- Operating voltage: 2.0–3.6 V
- Package: LQFP48 (TR indicates tape-and-reel packaging)
Note: exact peripheral counts may vary by subfamily; refer to datasheet for precise pinout and capabilities.
Pinout
- Pin count: 48 pins (LQFP-48, package code T7; TR = tape & reel)
- Function: 32-bit STM32F0 series microcontroller (ARM Cortex-M0 core) for general-purpose embedded control with integrated peripherals (GPIOs, timers, ADC, USART/SPI/I2C, etc.).
- Function: 32-bit STM32F0 series microcontroller (ARM Cortex-M0 core) for general-purpose embedded control with integrated peripherals (GPIOs, timers, ADC, USART/SPI/I2C, etc.).
Manufacturer
- Manufacturer: STMicroelectronics (ST).
- What kind of company: A Franco-Italian multinational semiconductor and electronics company that designs and manufactures microelectronics, including microcontrollers like the STM32 series, with global operations.
- What kind of company: A Franco-Italian multinational semiconductor and electronics company that designs and manufactures microelectronics, including microcontrollers like the STM32 series, with global operations.
Application
- USB-based devices: USB full-speed peripherals (HID, mass storage, communications).
- Battery-powered/space-constrained devices: wearables, handheld meters, remote sensors, data loggers.
- IoT and smart home: gateways, sensors, actuators, small controllers.
- Industrial instrumentation: small PLC-like tasks, process monitoring, DC motor control.
- Consumer electronics and prototyping: development boards, USB-enabled gadgets.
- General-purpose embedded control: PWM, ADC/DAC, timers for instrumentation and control tasks.
- Battery-powered/space-constrained devices: wearables, handheld meters, remote sensors, data loggers.
- IoT and smart home: gateways, sensors, actuators, small controllers.
- Industrial instrumentation: small PLC-like tasks, process monitoring, DC motor control.
- Consumer electronics and prototyping: development boards, USB-enabled gadgets.
- General-purpose embedded control: PWM, ADC/DAC, timers for instrumentation and control tasks.
Package
LQFP-64 (64-pin) package; TR = Tape-and-Reel packaging.
