規格
| 屬性 | 價值 |
| Package | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, SPC58 |
| ProductStatus | Obsolete |
| CoreProcessor | e200z420 |
| CoreSize | 32-Bit Dual-Core |
| Speed | 180MHz |
| Connectivity | CANbus, I²C, LINbus, SPI |
| Peripherals | DMA |
| NumberofI/O | 124 |
| ProgramMemorySize | 4MB (4M x 8) |
| ProgramMemoryType | FLASH |
| EEPROMSize | 128K x 8 |
| RAMSize | 512K x 8 |
| Voltage-Supply(Vcc/Vdd) | 3.3V, 5V |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 125°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 144-TQFP Exposed Pad |
概述
Description
SPC58EC80E5QMC0X is an automotive 32‑bit MCU from NXP Freescale’s SPC58EC family. It uses a Power Architecture e200z core and targets body/electronics, gateways, and safety‑critical automotive applications.
Key points:
- Core and speed: Power Architecture e200z core, up to about 80 MHz.
- Memory: on‑chip flash and RAM for code and data.
- Peripherals: automotive interfaces such as CAN (and CAN FD), LIN, plus common serial (SPI, I2C, UART), timers/PWMs, and ADCs.
- Safety features: hardware support suitable for automotive safety, e.g., memory protection and error‑checking capabilities (as provided in SPC58EC devices).
- Package: QMC0X denotes a specific packaging variant for the part.
- Use and tooling: suited for automotive control modules; supported by standard toolchains and vendor libraries (e.g., IAR, Lauterbach, NXP software).
Note: for exact specs (pin count, memory sizes, available CAN channels, temperature grade), consult the official datasheet and user manual for SPC58EC80E5QMC0X.
Key points:
- Core and speed: Power Architecture e200z core, up to about 80 MHz.
- Memory: on‑chip flash and RAM for code and data.
- Peripherals: automotive interfaces such as CAN (and CAN FD), LIN, plus common serial (SPI, I2C, UART), timers/PWMs, and ADCs.
- Safety features: hardware support suitable for automotive safety, e.g., memory protection and error‑checking capabilities (as provided in SPC58EC devices).
- Package: QMC0X denotes a specific packaging variant for the part.
- Use and tooling: suited for automotive control modules; supported by standard toolchains and vendor libraries (e.g., IAR, Lauterbach, NXP software).
Note: for exact specs (pin count, memory sizes, available CAN channels, temperature grade), consult the official datasheet and user manual for SPC58EC80E5QMC0X.
Features
SPC58EC80E5QMC0X is an automotive SPC58EC MCU from ST, based on the Power Architecture e200z0 core with up to 80 MHz operation. Key features:
- Core: e200z0 32-bit CPU, up to ~80 MHz
- Memory: on‑chip Flash and RAM (sizes vary by variant)
- Peripherals: CAN and CAN‑FD, LIN, FlexRay; USB 2.0 Full‑Speed/OTG; SPI, I2C, UART
- Analog/Digital: ADCs, DACs, PWM and advanced timers
- DMAs and data handling: DMA engine, hardware CRC
- Safety/Security: ECC in Flash/RAM, memory protection unit (MPU), watchdog, fault detection; optional dual‑bank flash and secure boot
- Power modes: multiple low‑power modes for automotive duty cycles
- Development: boot ROM, debug interfaces; multiple package options (QFP/QMC variants)
Note: exact memory sizes and some peripherals vary by device variant; consult the specific datasheet for precise numbers.
- Core: e200z0 32-bit CPU, up to ~80 MHz
- Memory: on‑chip Flash and RAM (sizes vary by variant)
- Peripherals: CAN and CAN‑FD, LIN, FlexRay; USB 2.0 Full‑Speed/OTG; SPI, I2C, UART
- Analog/Digital: ADCs, DACs, PWM and advanced timers
- DMAs and data handling: DMA engine, hardware CRC
- Safety/Security: ECC in Flash/RAM, memory protection unit (MPU), watchdog, fault detection; optional dual‑bank flash and secure boot
- Power modes: multiple low‑power modes for automotive duty cycles
- Development: boot ROM, debug interfaces; multiple package options (QFP/QMC variants)
Note: exact memory sizes and some peripherals vary by device variant; consult the specific datasheet for precise numbers.
Pinout
- Pin count: 80 pins (80-pin package)
- Function: ST SPC58EC80E5QMC0X is a 32‑bit automotive microcontroller (Power Architecture SPC58EC family) intended for ECU applications, with integrated peripherals (CAN, LIN, SCI/UART, SPI, I2C, ADCs, PWM/timers, etc.) for vehicle control systems.
- Function: ST SPC58EC80E5QMC0X is a 32‑bit automotive microcontroller (Power Architecture SPC58EC family) intended for ECU applications, with integrated peripherals (CAN, LIN, SCI/UART, SPI, I2C, ADCs, PWM/timers, etc.) for vehicle control systems.
Manufacturer
Manufacturer: NXP Semiconductors.
What kind of company: A Dutch multinational semiconductor company that designs and manufactures chips and embedded processors for automotive, industrial, and consumer electronics.
What kind of company: A Dutch multinational semiconductor company that designs and manufactures chips and embedded processors for automotive, industrial, and consumer electronics.
Application
SPC58EC80E5QMC0X is an automotive‑grade 32‑bit MCU from the SPC58 EC family. Common application areas include:
- Engine and powertrain control
- Transmission and hybrid/EV motor drive control
- Chassis and safety systems (ABS/ESP, traction control)
- Body electronics and comfort (BCM, HVAC, seat/mirror control)
- Instrumentation and instrument clusters
- In-vehicle gateways and network controllers (CAN/LIN/Ethernet)
- Functional-safety/ASIL‑compliant ECUs for safety-critical automotive applications
- Engine and powertrain control
- Transmission and hybrid/EV motor drive control
- Chassis and safety systems (ABS/ESP, traction control)
- Body electronics and comfort (BCM, HVAC, seat/mirror control)
- Instrumentation and instrument clusters
- In-vehicle gateways and network controllers (CAN/LIN/Ethernet)
- Functional-safety/ASIL‑compliant ECUs for safety-critical automotive applications
Package
LQFP (Quad Flat Package), 208-pin.
