圖片僅供參考
SN65HVD1474DR
+物料清單IC TRANSCEIVER FULL 1/1 8SOIC
-
製造商德州儀器
-
製造商部分 #SN65HVD1474DR
-
有存貨4367
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Part Status | Active |
| Base Product Number | 65HVD1474 |
| Type | Transceiver |
| Protocol | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Full |
| Receiver Hysteresis | 70 mV |
| Data Rate | 20Mbps |
| Voltage - Supply | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 125°C |
| Mounting Type | Surface Mount |
| Package | 8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
概述
Description
SN65HVD1474DR is Texas Instruments’ high‑speed CAN transceiver. It sits between a CAN controller and the CAN bus, converting the controller’s TXD into differential CANH/CANL signals and translating bus data back to RXD. Key points:
- Supports CAN 2.0A/B at up to about 1 Mbps.
- Provides fault protection and robust automotive features (undervoltage, overcurrent/short‑to‑ground or short‑to‑VCC protection, thermal shutdown, ESD protection).
- Includes low‑power/standby mode (via STB or enable pin) for power saving.
- Operates from a typical 5 V supply (check datasheet for exact voltage range) with suitable temperature range for automotive/industrial use.
- Package: 8‑pin SOIC in a DR package (tape & reel).
Typical use: connect TXD/RXD to a CAN controller, CANH/CANL to the CAN bus, and VCC/GND to power. For exact electrical specs and pinout, consult the TI SN65HVD1474DR datasheet.
- Supports CAN 2.0A/B at up to about 1 Mbps.
- Provides fault protection and robust automotive features (undervoltage, overcurrent/short‑to‑ground or short‑to‑VCC protection, thermal shutdown, ESD protection).
- Includes low‑power/standby mode (via STB or enable pin) for power saving.
- Operates from a typical 5 V supply (check datasheet for exact voltage range) with suitable temperature range for automotive/industrial use.
- Package: 8‑pin SOIC in a DR package (tape & reel).
Typical use: connect TXD/RXD to a CAN controller, CANH/CANL to the CAN bus, and VCC/GND to power. For exact electrical specs and pinout, consult the TI SN65HVD1474DR datasheet.
Pinout
Pin count: 14 pins (D package, SN65HVD1474DR).
Function: Dual high-speed RS-485/RS-422 transceiver (two independent channels). Each channel provides:
- DI (data input) and RO (receiver output) for TTL-compatible data
- DE (driver enable) and RE (receiver enable) per channel
- A/B differential bus pins for the RS-485/RS-422 bus
- Power/Ground pins (Vcc, GND)
In short, two differential transceiver channels in one 14‑pin package with per-channel enable control.
Function: Dual high-speed RS-485/RS-422 transceiver (two independent channels). Each channel provides:
- DI (data input) and RO (receiver output) for TTL-compatible data
- DE (driver enable) and RE (receiver enable) per channel
- A/B differential bus pins for the RS-485/RS-422 bus
- Power/Ground pins (Vcc, GND)
In short, two differential transceiver channels in one 14‑pin package with per-channel enable control.
Manufacturer
- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits for a wide range of applications.
- What kind of company: An American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits for a wide range of applications.
Application
SN65HVD1474DR is a CAN bus transceiver. Its application areas include:
- Automotive: in-vehicle networks (ECUs, powertrain/body/chassis, gateways, telematics)
- Industrial automation: PLCs, motor drives, robotics, process control
- Building automation: HVAC, lighting, security, energy management
- Instrumentation and sensing: distributed data acquisition in harsh environments
- Any robust CAN network requiring fault protection and reliable bus communication
Note: used to connect a CAN controller to the physical CAN bus in high-speed, fault-tolerant CAN applications.
- Automotive: in-vehicle networks (ECUs, powertrain/body/chassis, gateways, telematics)
- Industrial automation: PLCs, motor drives, robotics, process control
- Building automation: HVAC, lighting, security, energy management
- Instrumentation and sensing: distributed data acquisition in harsh environments
- Any robust CAN network requiring fault protection and reliable bus communication
Note: used to connect a CAN controller to the physical CAN bus in high-speed, fault-tolerant CAN applications.
Package
Package type: 16-pin SOIC (D) package, with Tape & Reel (DR suffix).
