圖片僅供參考
SI52204-A02BGM
+物料清單IC CLOCK GEN PCIE 32QFN
-
製造商Skyworks解決方案股份有限公司。
-
製造商部分 #SI52204-A02BGM
-
有存貨6031
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Supplier | Skyworks Solutions Inc. |
| Package | Tray |
| ProductStatus | Active |
| PLL | Yes |
| MainPurpose | PCI Express (PCIe), Clock Generator |
| Input | Clock, Crystal |
| Output | HCSL, LVCMOS |
| NumberofCircuits | 1 |
| Ratio-Input:Output | 1:4 |
| Differential-Input:Output | No/Yes |
| Frequency-Max | 100MHz |
| Voltage-Supply | 1.5V ~ 1.8V |
| OperatingTemperature | -40°C ~ 85°C |
| MountingType | Surface Mount |
| Package/Case | 32-VFQFN Exposed Pad |
概述
Description
SI52204-A02BGM is a dual N‑channel MOSFET device packaged for compact power-switching in power-management circuits. It contains two enhancement-mode MOSFETs in one package, suitable for high-side/low-side switching, load-path control in DC‑DC converters, battery protection, and similar applications where space and efficiency matter. Typical use cases include combining the two FETs for a bidirectional switch, or using them separately in a split power path. Key points to check in the datasheet are VDS and ID ratings, RDS(on), gate threshold (logic-level), package pinout, and any integrated protection features. For exact electrical specs and pin configuration for the A02BGM variant, refer to the official datasheet. If you’d like, I can summarize the datasheet’s main specs.
Features
I don’t have the exact datasheet here, but typical features of the SI52204-A02BGM (SiTime MEMS oscillator family) include:
- MEMS-based fixed-frequency oscillator with very low jitter
- Frequency range from a few MHz up to several hundred MHz (variant-dependent)
- Output formats: LVCMOS (various voltage levels) and differential options such as LVDS/HCSL/LVPECL (depending on variant)
- Supply voltage options around 1.8 V to 3.3 V (variant dependent)
- Temperature range: commercial and/or industrial variants available
- Enable/disable control and possible power-down/shutdown mode
- Small package (compact 2.5×3.2 mm family package) with a low pin count (6–8 pins)
- Low power consumption and high stability suitable for clocking applications
For exact numbers (frequency ranges, outputs, temp range, and package), please share the datasheet or allow me to fetch it.
- MEMS-based fixed-frequency oscillator with very low jitter
- Frequency range from a few MHz up to several hundred MHz (variant-dependent)
- Output formats: LVCMOS (various voltage levels) and differential options such as LVDS/HCSL/LVPECL (depending on variant)
- Supply voltage options around 1.8 V to 3.3 V (variant dependent)
- Temperature range: commercial and/or industrial variants available
- Enable/disable control and possible power-down/shutdown mode
- Small package (compact 2.5×3.2 mm family package) with a low pin count (6–8 pins)
- Low power consumption and high stability suitable for clocking applications
For exact numbers (frequency ranges, outputs, temp range, and package), please share the datasheet or allow me to fetch it.
Pinout
- Pin count: 8 pins
- Function: Dual N-channel MOSFET pair in one package, intended for power switching (load/path control) applications.
- Function: Dual N-channel MOSFET pair in one package, intended for power switching (load/path control) applications.
Manufacturer
Manufacturer: Silicon Labs (Silicon Laboratories).
What kind of company: A fabless semiconductor company that designs and sells analog/mixed-signal ICs, microcontrollers, timing/synchronization devices, sensors, and wireless connectivity solutions for embedded applications.
What kind of company: A fabless semiconductor company that designs and sells analog/mixed-signal ICs, microcontrollers, timing/synchronization devices, sensors, and wireless connectivity solutions for embedded applications.
Application
Applications:
- Power management and rail switching in portable/battery-powered devices (MCUs, sensors, memories)
- System power sequencing and gating in embedded systems
- USB power paths, charging interfaces and hot-swap protection
- IoT, wearables, and consumer electronics requiring reliable rail control
- Automotive and industrial electronics for protected power distribution
- Power management and rail switching in portable/battery-powered devices (MCUs, sensors, memories)
- System power sequencing and gating in embedded systems
- USB power paths, charging interfaces and hot-swap protection
- IoT, wearables, and consumer electronics requiring reliable rail control
- Automotive and industrial electronics for protected power distribution
Package
An 8-pin QFN package (3×3 mm) with an exposed pad.
