規格
| 屬性 | 價值 |
| Supplier | NXP USA Inc. |
| Package | Tray |
| Series | S08 |
| ProductStatus | Active |
| CoreProcessor | S08 |
| CoreSize | 8-Bit |
| Speed | 40MHz |
| Connectivity | I²C, LINbus, SCI, SPI |
| Peripherals | LVD, POR, PWM, WDT |
| NumberofI/O | 39 |
| ProgramMemorySize | 32KB (32K x 8) |
| ProgramMemoryType | FLASH |
| EEPROMSize | 1K x 8 |
| RAMSize | 1.5K x 8 |
| Voltage-Supply(Vcc/Vdd) | 2.7V ~ 5.5V |
| DataConverters | A/D 16x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 48-LQFP |
概述
Description
S9S08DN32F2CLF is an 8‑bit microcontroller from NXP/Freescale in the S9S08 DN32 family. It uses the S9S08 core and targets compact control tasks with moderate I/O.
Key points:
- Memory: 32 KB flash program memory; RAM is a few kilobytes (exact size varies by variant).
- Peripherals: multiple serial interfaces (SCI/UART, I2C, SPI), ADC (12‑bit), timers, watchdog, plus basic low‑power modes.
- Debugging/PRG: supports in‑system programming and on‑chip debugging.
- Package: CLF denotes a specific package variant (pin count/footprint varies; check datasheet for details).
Typical uses: automotive body/industrial control, motor control, sensing, and other small embedded applications needing a compact, low‑power MCU.
For exact specs—RAM size, clock speed, voltage range, pinout, and package details—refer to the official S9S08DN32F2CLF datasheet and reference manual.
Key points:
- Memory: 32 KB flash program memory; RAM is a few kilobytes (exact size varies by variant).
- Peripherals: multiple serial interfaces (SCI/UART, I2C, SPI), ADC (12‑bit), timers, watchdog, plus basic low‑power modes.
- Debugging/PRG: supports in‑system programming and on‑chip debugging.
- Package: CLF denotes a specific package variant (pin count/footprint varies; check datasheet for details).
Typical uses: automotive body/industrial control, motor control, sensing, and other small embedded applications needing a compact, low‑power MCU.
For exact specs—RAM size, clock speed, voltage range, pinout, and package details—refer to the official S9S08DN32F2CLF datasheet and reference manual.
Equivalent
Equivalent parts in the same family (32 KB flash, 2 KB RAM, HCS08 core) include:
- MC9S08DN32 (Freescale/NXP)
- S9S08DN32F2 (same silicon, different packaging)
- S08DN32F2 (if available in your region/line)
Note: exact package, temperature rating, and revision differ. Use NXP cross-reference to confirm pinout and footprints before substituting.
- MC9S08DN32 (Freescale/NXP)
- S9S08DN32F2 (same silicon, different packaging)
- S08DN32F2 (if available in your region/line)
Note: exact package, temperature rating, and revision differ. Use NXP cross-reference to confirm pinout and footprints before substituting.
Features
Key features of S9S08DN32F2CLF (concise):
- 8-bit HCS08 CPU core, up to ~20 MHz operation.
- Memory: 32 KB Flash program memory; 2 KB RAM.
- Peripherals: 10-bit ADC (multiple channels), analog comparator; two 16-bit timers with PWM; one 8-bit timer.
- Serial comms: SCI/UART, SPI, I2C.
- Other: watchdog timer; interrupt system with vector table.
- Debug/in-system programming via Background Debug Mode (BDM).
- Power management: run, wait, and stop modes; voltage detector for brown-out protection.
- Operating voltage typically in the 1.8–3.6 V range (variant dependent).
- Package: CLF (32-pin) LQFP/QFN style.
Note: exact specifications (clock, memory, peripherals counts) can vary by revision; check the datasheet for the precise device variant.
- 8-bit HCS08 CPU core, up to ~20 MHz operation.
- Memory: 32 KB Flash program memory; 2 KB RAM.
- Peripherals: 10-bit ADC (multiple channels), analog comparator; two 16-bit timers with PWM; one 8-bit timer.
- Serial comms: SCI/UART, SPI, I2C.
- Other: watchdog timer; interrupt system with vector table.
- Debug/in-system programming via Background Debug Mode (BDM).
- Power management: run, wait, and stop modes; voltage detector for brown-out protection.
- Operating voltage typically in the 1.8–3.6 V range (variant dependent).
- Package: CLF (32-pin) LQFP/QFN style.
Note: exact specifications (clock, memory, peripherals counts) can vary by revision; check the datasheet for the precise device variant.
Pinout
- Pin count: 32 pins (LQFP32, package CLF)
- Function: 8‑bit microcontroller (NXP/Freescale HCS08 core) with 32 KB flash and 2 KB RAM, intended for embedded control. Includes on‑chip peripherals such as serial communications (SCI), SPI/I2C, ADCs, timers, and GPIO for general-purpose control applications.
- Function: 8‑bit microcontroller (NXP/Freescale HCS08 core) with 32 KB flash and 2 KB RAM, intended for embedded control. Includes on‑chip peripherals such as serial communications (SCI), SPI/I2C, ADCs, timers, and GPIO for general-purpose control applications.
Manufacturer
- Manufacturer: NXP Semiconductors. The S9S08DN32F2CLF is part of NXP’s S9S08 family of 8‑bit microcontrollers (the line originated from Freescale/Motorola and was integrated into NXP after the Freescale acquisition).
- Company type: NXP is a Dutch multinational semiconductor company (headquartered in Eindhoven) that designs and manufactures embedded processors, microcontrollers, sensors, and secure connectivity solutions for automotive, industrial, and consumer markets.
- Company type: NXP is a Dutch multinational semiconductor company (headquartered in Eindhoven) that designs and manufactures embedded processors, microcontrollers, sensors, and secure connectivity solutions for automotive, industrial, and consumer markets.
Application
Common applications for the S9S08DN32F2CLF:
- Automotive body electronics (lighting control, door modules, sensor I/O)
- Industrial sensing and control (data acquisition, small PLC-like tasks)
- Consumer electronics and instrument panels
- Home/building automation (thermostats, smart switches, HMI)
- Small motor control and power management
- Portable/medical sensing devices (low-power embedded control)
Notes: This 8-bit MCU with 32 kB flash, multiple timers/ADC and serial interfaces (SCI, I2C, SPI) suits cost-sensitive embedded control in these areas.
- Automotive body electronics (lighting control, door modules, sensor I/O)
- Industrial sensing and control (data acquisition, small PLC-like tasks)
- Consumer electronics and instrument panels
- Home/building automation (thermostats, smart switches, HMI)
- Small motor control and power management
- Portable/medical sensing devices (low-power embedded control)
Notes: This 8-bit MCU with 32 kB flash, multiple timers/ADC and serial interfaces (SCI, I2C, SPI) suits cost-sensitive embedded control in these areas.
Package
LQFP48 (48-pin Quad Flat Package).
