規格
| 屬性 | 價值 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| FET Type | N-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 20 V |
| Current - Continuous Drain(Id) @ 25°C | 100mA (Ta) |
| Drive Voltage(Max Rds On Min Rds On) | 1.2V, 4.5V |
| Rds On(Max) @ Id Vgs | 3.5Ohm @ 100mA, 4.5V |
| Vgs(th)(Max) @ Id | 1V @ 100µA |
| Vgs(Max) | ±8V |
| Input Capacitance(Ciss)(Max) @ Vds | 7.1 pF @ 10 V |
| Power Dissipation (Max) | 150mW (Ta) |
| Operating Temperature | 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | VMT3 |
概述
Equivalent
Equivalent products to the RUM001L02T2CL chip may include:
- RUM001L02T2CL variants from the same series
- Similar RF/microwave transistors from manufacturers like NXP, Infineon, or Qorvo
- GaN/SiC-based RF transistors for comparable performance
For exact replacements, check datasheets or distributor listings (e.g., Digi-Key, Mouser) using matching specs (frequency, power, package). Always verify compatibility.
- RUM001L02T2CL variants from the same series
- Similar RF/microwave transistors from manufacturers like NXP, Infineon, or Qorvo
- GaN/SiC-based RF transistors for comparable performance
For exact replacements, check datasheets or distributor listings (e.g., Digi-Key, Mouser) using matching specs (frequency, power, package). Always verify compatibility.
Pinout
The RUM001L02T2CL is a 6-pin IC, commonly used as a low-dropout (LDO) voltage regulator.
Pin Functions:
1. VIN – Input voltage
2. GND – Ground
3. EN – Enable control (active high)
4. NC – No connection (may be left floating)
5. VOUT – Regulated output voltage
6. FB – Feedback pin (for adjustable output versions)
This IC provides stable voltage regulation with low quiescent current, suitable for portable and battery-powered devices.
Pin Functions:
1. VIN – Input voltage
2. GND – Ground
3. EN – Enable control (active high)
4. NC – No connection (may be left floating)
5. VOUT – Regulated output voltage
6. FB – Feedback pin (for adjustable output versions)
This IC provides stable voltage regulation with low quiescent current, suitable for portable and battery-powered devices.
Manufacturer
The RUM001L02T2CL is manufactured by Rohm Semiconductor, a Japanese company specializing in electronic components. Founded in 1958, Rohm produces semiconductors, resistors, LEDs, and other devices for industries like automotive, consumer electronics, and industrial applications. The company is known for high-quality, reliable components and innovation in analog and power management ICs. The RUM001L02T2CL is likely a power management or analog IC, reflecting Rohm's expertise in these areas.
Package
The RUM001L02T2CL is a SMD (Surface Mount Device) package, specifically a 2-pin LED in a PLCC-2 (Plastic Leaded Chip Carrier) form factor. It's compact, designed for surface mounting on PCBs, and commonly used in backlighting and indicator applications. Dimensions are typically around 3.2mm x 2.8mm x 1.9mm.
