圖片僅供參考
IC REG OVP WDFN-8
-
製造商Richtek美國股份有限公司。
-
製造商部分 #RT9718BGQW
-
包裹 WDFN-8
-
有存貨1767
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Function | Battery Protection |
| Number of Cells | 1 |
| Fault Protection | Over Current, Over Temperature, Over Voltage |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
概述
Description
The RT9718BGQW supports current limiting, which protects the circuit by preventing excessive current flow. It offers reverse-voltage protection and has a low quiescent current, making it energy efficient. The switch operates with an input voltage range typically between 2.7V and 5.5V, suitable for a variety of USB-powered applications.
Its compact 8-pin package is ideal for space-constrained designs. The RT9718BGQW’s design ensures minimal voltage drop, providing efficient power delivery. It is commonly used in consumer electronics, computing, and communication devices, where reliable power control and protection are paramount.
Equivalent
Features
Key features include:
1. Input Voltage Range: It can operate over a wide input voltage range, making it versatile for various applications.
2. Output Current: The chip supports a solid output current capacity suitable for powering standard electronic components.
3. Low Quiescent Current: Designed to minimize power consumption in standby mode, extending battery life in portable devices.
4. Fast Transient Response: Offers quick reaction to changes in load, maintaining output stability.
5. Built-in Protections: Over-current protection and thermal shutdown features enhance reliability and longevity.
These attributes make the RT9718BGQW ideal for use in consumer electronics, portable devices, and other applications requiring efficient power management.
Pinout
1. VIN: Input voltage pin; connects to the power source.
2. VOUT: Output voltage pin; supplies power to the connected load.
3. GND: Ground pin; common ground for the input and output.
4. EN (Enable): Logic input pin; used to enable or disable the switch function.
5. FAULT: Open-drain fault reporting pin; indicates overcurrent or other faults.
6. ILIM: Current limit set pin; used to set the maximum output current.
7. NC (No Connection) or unused pin: Often present in similar packages but does not perform any specific function for this IC.
8. /: Additional connections or features (could vary slightly depending on specific package variants).
The RT9718BGQW is designed for overcurrent protection and provides an efficient means of current limiting and control in various power distribution applications.