圖片僅供參考
P1020NSN2HFB
+物料清單QORIQ, POWER ARCH 32-BIT SOC, 2
-
製造商飛思卡爾電晶體
-
製造商部分 #P1020NSN2HFB
-
有存貨8096
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Supplier | Rochester Electronics, LLC |
| Package | Bulk |
| Series | QorIQ P1 |
| ProductStatus | Active |
| CoreProcessor | PowerPC e500v2 |
| NumberofCores/BusWidth | 2 Core, 32-Bit |
| Speed | 800MHz |
| RAMControllers | DDR2, DDR3 |
| GraphicsAcceleration | No |
| Ethernet | 10/100/1000Mbps (3) |
| USB | USB 2.0 + PHY (2) |
| Voltage-I/O | 2.5V, 3.3V |
| OperatingTemperature | 0°C ~ 125°C (TA) |
| Package/Case | 689-BBGA Exposed Pad |
概述
Description
P1020NSN2HFB is a Freescale/NXP QorIQ embedded processor, part of the P1020 family. It targets networking, telecom, and industrial applications with a dual-core PowerPC architecture.
Key points:
- Dual PowerPC e500v2 cores for balanced performance and efficiency
- Integrated memory controller and multiple high-speed interfaces (Ethernet, PCIe, USB, etc.)
- On-chip peripherals and security features; supports DDR2/DDR3 memory and flash storage
- NSN2HFB denotes a specific package/variant (temperature grade/procurement code); exact specs depend on revision
Typical uses include network equipment (routers/switches), telecom cores, and industrial control systems. For precise specs, pinout, and packaging details, consult the official P1020NSN2HFB datasheet and hardware user guide from NXP/Freescale.
Key points:
- Dual PowerPC e500v2 cores for balanced performance and efficiency
- Integrated memory controller and multiple high-speed interfaces (Ethernet, PCIe, USB, etc.)
- On-chip peripherals and security features; supports DDR2/DDR3 memory and flash storage
- NSN2HFB denotes a specific package/variant (temperature grade/procurement code); exact specs depend on revision
Typical uses include network equipment (routers/switches), telecom cores, and industrial control systems. For precise specs, pinout, and packaging details, consult the official P1020NSN2HFB datasheet and hardware user guide from NXP/Freescale.
Equivalent
P1020NSN2HFB is a Freescale/NXP QorIQ P1020 PowerPC SoC in a specific package. There are no published direct pin-for-pin equivalents. For exact substitutes, use NXP’s cross-reference tool or distributor cross-ref. Closest feature-near relatives in the QorIQ family include P1012, P1013, P1022, and P2020; however, footprints, I/O, and speeds differ—verify packaging and requirements before replacing.
Features
P1020NSN2HFB features (summary):
- Freescale/NXP QorIQ P1020: dual-core PowerPC e500v2 SoC
- Core clock: up to ~1.2 GHz per core (depends on bin/variant)
- On-chip memory: L2 cache and DDR3/DDR2 memory controller (ECC capable)
- High-speed interfaces: PCIe Gen2 (host/endpoint), PCI-X on applicable variants
- Networking: multiple Gigabit Ethernet MACs with DMA
- Storage and I/O: USB 2.0 (host/peripheral), SATA interface
- Peripherals: I2C, SPI, UART, GPIO, timers
- Security: hardware cryptographic acceleration and security features (secure boot, etc.)
- Power management: advanced low-power states and system control
- Debug/Development: JTAG/trace support and standard embedded peripherals
Note: exact counts and supported interfaces may vary by package/stepping; consult the specific datasheet for P1020NSN2HFB for precise specs.
- Freescale/NXP QorIQ P1020: dual-core PowerPC e500v2 SoC
- Core clock: up to ~1.2 GHz per core (depends on bin/variant)
- On-chip memory: L2 cache and DDR3/DDR2 memory controller (ECC capable)
- High-speed interfaces: PCIe Gen2 (host/endpoint), PCI-X on applicable variants
- Networking: multiple Gigabit Ethernet MACs with DMA
- Storage and I/O: USB 2.0 (host/peripheral), SATA interface
- Peripherals: I2C, SPI, UART, GPIO, timers
- Security: hardware cryptographic acceleration and security features (secure boot, etc.)
- Power management: advanced low-power states and system control
- Debug/Development: JTAG/trace support and standard embedded peripherals
Note: exact counts and supported interfaces may vary by package/stepping; consult the specific datasheet for P1020NSN2HFB for precise specs.
Application
Applications for P1020NSN2HFB (P1020-based embedded processor):
- Embedded networking gear: high-end routers, switches, gateways, VPN/firewall appliances
- Telecom infrastructure: edge/aggregation nodes, NFV platforms
- Storage appliances: NAS, iSCSI/RAID controllers, appliance-based storage
- Industrial automation and control systems
- Security appliances: IPS/UTM, secure gateways
- Digital video surveillance and media appliances requiring high performance
- Embedded networking gear: high-end routers, switches, gateways, VPN/firewall appliances
- Telecom infrastructure: edge/aggregation nodes, NFV platforms
- Storage appliances: NAS, iSCSI/RAID controllers, appliance-based storage
- Industrial automation and control systems
- Security appliances: IPS/UTM, secure gateways
- Digital video surveillance and media appliances requiring high performance
Package
Package type can’t be determined from the code alone. Please provide the manufacturer or datasheet for P1020NSN2HFB; I can confirm the exact package (e.g., PBGA, LQFP) from it.
