規格
| 屬性 | 價值 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Amplifier Type | General Purpose |
| Number of Circuits | 1 |
| Output Type | Rail-to-Rail |
| Slew Rate | 7V/µs |
| Gain Bandwidth Product | 2.5 MHz |
| Current - Input Bias | 20 pA |
| Voltage - Input Offset | 100 µV |
| Supply Current | 140µA |
| Voltage - Supply Span(Min) | 4.5 V |
| Voltage - Supply Span(Max) | 36 V |
| Operating Temperature | -40°C ~ 125°C |
| Mounting Type | Surface Mount |
概述
Description
The OPA196IDBVR is a precision operational amplifier from Texas Instruments, designed for a wide range of applications due to its excellent performance characteristics. It features low offset voltage, low noise, and high open-loop gain, making it ideal for precision instrumentation applications. The amplifier operates over a wide supply voltage range from 4.5V to 36V, or from ±2.25V to ±18V when using dual supplies, enhancing its versatility.
With a low input bias current and wide bandwidth, the OPA196IDBVR is well-suited for use in sensor signal conditioning, data acquisition systems, and active filters. The device is also known for its high output drive capability and low distortion, which are essential in audio and high-fidelity applications.
Packaged in a small SOT-23-5 package, the OPA196IDBVR is ideal for space-constrained designs. It operates over a wide temperature range, typically from -40°C to +125°C, making it suitable for various industrial and automotive environments. Overall, the OPA196IDBVR offers high precision and reliability, making it a versatile choice for designers seeking robust performance.
With a low input bias current and wide bandwidth, the OPA196IDBVR is well-suited for use in sensor signal conditioning, data acquisition systems, and active filters. The device is also known for its high output drive capability and low distortion, which are essential in audio and high-fidelity applications.
Packaged in a small SOT-23-5 package, the OPA196IDBVR is ideal for space-constrained designs. It operates over a wide temperature range, typically from -40°C to +125°C, making it suitable for various industrial and automotive environments. Overall, the OPA196IDBVR offers high precision and reliability, making it a versatile choice for designers seeking robust performance.
Equivalent
The OPA196IDBVR is a precision operational amplifier from Texas Instruments. Equivalent products from other manufacturers include:
1. Analog Devices ADA4077-1
2. Maxim Integrated (now part of Analog Devices) MAX9617
3. Microchip Technology MCP6V51
These alternatives offer similar specifications in terms of low noise, low offset voltage, and rail-to-rail input/output capabilities. Always check the detailed datasheets to ensure full compatibility with your application requirements.
1. Analog Devices ADA4077-1
2. Maxim Integrated (now part of Analog Devices) MAX9617
3. Microchip Technology MCP6V51
These alternatives offer similar specifications in terms of low noise, low offset voltage, and rail-to-rail input/output capabilities. Always check the detailed datasheets to ensure full compatibility with your application requirements.
Features
The OPA196IDBVR is a precision operational amplifier from Texas Instruments. Here are its key features:
1. Low Offset Voltage: It has a low offset voltage, typically around 25 µV, which ensures high precision in applications.
2. Wide Supply Range: It operates over a wide supply voltage range from 4.5V to 36V, making it versatile for various applications.
3. Rail-to-Rail Output: The amplifier offers rail-to-rail output swing, maximizing dynamic range and allowing for better use of the supply voltage.
4. Low Noise: It features low noise, approximately 5.3 nV/√Hz at 1kHz, which is suitable for low-noise applications.
5. Low Quiescent Current: The device consumes low quiescent current, about 225 µA per amplifier, aiding in power-sensitive designs.
6. High Open-Loop Gain: It provides a high open-loop gain, typically 130 dB, contributing to its precision.
7. Temperature Range: The operational temperature range is from –40°C to 125°C, suitable for industrial environments.
These features make the OPA196IDBVR ideal for precision instrumentation, sensor signal conditioning, and other applications requiring high accuracy and low power consumption.
1. Low Offset Voltage: It has a low offset voltage, typically around 25 µV, which ensures high precision in applications.
2. Wide Supply Range: It operates over a wide supply voltage range from 4.5V to 36V, making it versatile for various applications.
3. Rail-to-Rail Output: The amplifier offers rail-to-rail output swing, maximizing dynamic range and allowing for better use of the supply voltage.
4. Low Noise: It features low noise, approximately 5.3 nV/√Hz at 1kHz, which is suitable for low-noise applications.
5. Low Quiescent Current: The device consumes low quiescent current, about 225 µA per amplifier, aiding in power-sensitive designs.
6. High Open-Loop Gain: It provides a high open-loop gain, typically 130 dB, contributing to its precision.
7. Temperature Range: The operational temperature range is from –40°C to 125°C, suitable for industrial environments.
These features make the OPA196IDBVR ideal for precision instrumentation, sensor signal conditioning, and other applications requiring high accuracy and low power consumption.
Pinout
The OPA196IDBVR is a precision operational amplifier from Texas Instruments. It comes in a 5-pin SOT-23 package. The pin functions are as follows:
1. Pin 1 (OUT): Output - This is the output pin of the operational amplifier where the amplified signal is available.
2. Pin 2 (V- or GND): Negative Supply Voltage or Ground - This pin is connected to the negative power supply or ground, depending on the configuration.
3. Pin 3 (IN+): Non-inverting Input - This is the positive input terminal of the op-amp, where the input signal is applied.
4. Pin 4 (IN-): Inverting Input - This is the negative input terminal of the op-amp, where another input signal can be applied for differential amplification.
5. Pin 5 (V+): Positive Supply Voltage - This pin is connected to the positive power supply.
The OPA196IDBVR is designed for precision applications, offering low noise, low offset voltage, and high bandwidth, making it suitable for a variety of applications including sensor signal conditioning and active filtering.
1. Pin 1 (OUT): Output - This is the output pin of the operational amplifier where the amplified signal is available.
2. Pin 2 (V- or GND): Negative Supply Voltage or Ground - This pin is connected to the negative power supply or ground, depending on the configuration.
3. Pin 3 (IN+): Non-inverting Input - This is the positive input terminal of the op-amp, where the input signal is applied.
4. Pin 4 (IN-): Inverting Input - This is the negative input terminal of the op-amp, where another input signal can be applied for differential amplification.
5. Pin 5 (V+): Positive Supply Voltage - This pin is connected to the positive power supply.
The OPA196IDBVR is designed for precision applications, offering low noise, low offset voltage, and high bandwidth, making it suitable for a variety of applications including sensor signal conditioning and active filtering.
Manufacturer
The OPA196IDBVR is manufactured by Texas Instruments (TI). Texas Instruments is a global technology company that designs and manufactures semiconductors and various integrated circuits, which are used in a wide array of electronic devices. Founded in 1930 and headquartered in Dallas, Texas, the company is well-known for its development of products for analog and digital embedded processing. TI serves a diverse range of industries, including automotive, industrial, personal electronics, communications equipment, and enterprise systems. As a leader in the semiconductor industry, TI focuses on innovation and high-quality manufacturing to meet the demands of modern technology.
Application
The OPA196IDBVR is a precision operational amplifier commonly used in various applications due to its low noise, low offset voltage, and wide supply range. Key application areas include:
1. Instrumentation and Measurement Systems: Its precision features make it ideal for accurate data acquisition and sensor signal conditioning.
2. Industrial Automation: Used in control systems for its reliability and precision.
3. Medical Devices: Suitable for imaging and diagnostic equipment due to its low noise performance.
4. Automotive Systems: Used in sensor interfaces and electronic control units.
5. Consumer Electronics: Employed in audio equipment and other precision signal processing tasks.
Its versatility makes it a reliable choice for designs requiring high performance and accuracy.
1. Instrumentation and Measurement Systems: Its precision features make it ideal for accurate data acquisition and sensor signal conditioning.
2. Industrial Automation: Used in control systems for its reliability and precision.
3. Medical Devices: Suitable for imaging and diagnostic equipment due to its low noise performance.
4. Automotive Systems: Used in sensor interfaces and electronic control units.
5. Consumer Electronics: Employed in audio equipment and other precision signal processing tasks.
Its versatility makes it a reliable choice for designs requiring high performance and accuracy.
Package
The OPA196IDBVR is a Texas Instruments operational amplifier, and its package type is SOT-23-5. This is a small outline transistor package with 5 pins, commonly used for surface-mount applications.
