圖片僅供參考
MPU-6050A
+物料清單MOTION TRACKING DEVICE
-
製造商TDK InvenSense
-
製造商部分 #MPU-6050A
-
有存貨14028
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Part Status | Obsolete |
| Packaging | Bulk |
概述
Description
Key points
- Interfaces: I2C (SCL/SDA); I2C address 0x68 or 0x69 (depending on AD0).
- Outputs: 16‑bit raw accelerometer and gyroscope data; built‑in temperature sensor.
- Ranges: accelerometer ±2/4/8/16 g; gyroscope ±250/500/1000/2000 deg/s.
- Data rate: can output data up to about 1 kHz (with configurable sample rate and low‑pass filter).
- Features: optional DMP for quaternion/Euler orientation, gesture detection; interrupt output.
- Power: low power operation; simple wake‑up sequence (PWR_MGMT_1).
- Applications: drones, robotics, wearables, motion tracking.
- Notes: Some libraries rely on the DMP; many developers read raw data and fuse externally. No magnetometer.
If you’re seeing MPU-6050A, it’s usually just a variant/name for the MPU-6050.
Equivalent
Features
- 6-axis MEMS: 3-axis accelerometer + 3-axis gyroscope
- 16-bit resolution per axis
- On-chip Digital Motion Processor (DMP) for sensor fusion (quaternions, gravity, yaw/pitch/roll, linear acceleration)
- Integrated on-chip temperature sensor
- I2C interface; 7-bit address 0x68 or 0x69 (AD0)
- Programmable full-scale ranges: accelerometer ±2/4/8/16 g; gyroscope ±250/500/1000/2000 °/s
- Digital low-pass filter (DLPF) and configurable sample rate
- FIFO buffer and multiple interrupt outputs (data ready, motion detection, FIFO overflow, etc.)
- Self-test and built-in calibration/temperature compensation
- Low power modes with sleep/wake-on-motion capability
- Small package, low power consumption, suitable for wearable/embedded use
Note: exact specs (voltage, temp range, memory details) vary by revision; consult the datasheet for precise values.
Pinout
- Power/Ground: VDD (core/analog supply), VLOGIC/VDDIO (I/O supply), GND.
- I2C interface: SDA (data), SCL (clock), AD0/ADO (I2C address select).
- Interrupt/sync: INT (interrupt output), FSYNC (frame sync input).
- Auxiliary I2C master: XDA, XCL (auxiliary data/clock to connect an external magnetometer).
- Other: multiple NC/reserved pads and thermal/ground pad for PCB mounting.
Functionally the device contains a 3-axis accelerometer and 3-axis gyroscope with on-chip 16-bit ADCs, digital motion processor (DMP) firmware support, configurable full-scale ranges and filters, and communicates digitally over I2C (no analog outputs).
Manufacturer
- What kind of company: A fabless semiconductor company specializing in MEMS motion sensors (accelerometers, gyroscopes and IMUs).
Application
- Drone/UAV flight control and stabilization
- Robotics pose estimation and navigation
- Wearables and activity recognition (fitness, gait)
- VR/AR tracking and gesture control
- Gaming controllers and motion input
- Smart devices and IoT inertial sensing
- Industrial sensing (tilt, vibration) and automotive safety aids
Package
Frequently Asked Questions
Q: What is the typical application for the MPU-6050A?
A: It is a 6-axis MotionTracking device combining a 3-axis gyroscope and 3-axis accelerometer, ideal for motion sensing in consumer electronics.
Q: Is this part still available for new designs?
A: No, the MPU-6050A is marked as "Obsolete". It is recommended to select a newer, active alternative for new projects.
Q: What packaging format is this MPU-6050A supplied in?
A: It is supplied in Bulk packaging, which typically means loose or tray packaging rather than tape-and-reel.
Q: What is the main advantage of using this sensor?
A: It integrates gyroscope and accelerometer on a single chip, reducing system complexity and power consumption.
Q: Can this component be used for drone stabilization?
A: Yes, its 6-axis fusion is commonly used in drones for attitude estimation and stabilization, though its obsolete status may limit supply.
Q: Does the MPU-6050A require external signal processing?
A: It includes an onboard Digital Motion Processor (DMP) to offload complex motion processing from the host processor.
Q: Is it compatible with standard I2C communication?
A: Yes, it supports I2C serial communication up to 400kHz for easy interfacing with microcontrollers.
