規格
| 屬性 | 價值 |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| AmplifierType | General Purpose |
| NumberofCircuits | 1 |
| OutputType | Rail-to-Rail |
| SlewRate | 0.5V/µs |
| GainBandwidthProduct | 1 MHz |
| Current-InputBias | 1 pA |
| Voltage-InputOffset | 4.5 mV |
| Current-Supply | 45µA |
| Voltage-SupplySpan(Min) | 1.8 V |
| Voltage-SupplySpan(Max) | 6 V |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package/Case | SC-74A, SOT-753 |
概述
Description
The MCP6401T-E/OT is a low-power, single operational amplifier from Microchip Technology, designed for general-purpose applications. It operates with a wide supply voltage range from 1.8V to 6.0V and features a low quiescent current, making it ideal for battery-powered devices. This op-amp offers rail-to-rail input and output, enhancing its versatility and performance in various circuit configurations.
The MCP6401T-E/OT offers a bandwidth of 1 MHz and a slew rate of 0.5 V/µs, which provides a good balance between speed and power consumption. It comes in a compact SOT-23-5 package, which makes it suitable for space-constrained applications. The device has a low input offset voltage and offers high input impedance, contributing to accurate signal amplification.
Overall, the MCP6401T-E/OT is a cost-effective solution with reliable performance for applications such as sensor interfacing, signal conditioning, and other analog signal processing tasks in consumer electronics, automotive systems, and industrial controls.
The MCP6401T-E/OT offers a bandwidth of 1 MHz and a slew rate of 0.5 V/µs, which provides a good balance between speed and power consumption. It comes in a compact SOT-23-5 package, which makes it suitable for space-constrained applications. The device has a low input offset voltage and offers high input impedance, contributing to accurate signal amplification.
Overall, the MCP6401T-E/OT is a cost-effective solution with reliable performance for applications such as sensor interfacing, signal conditioning, and other analog signal processing tasks in consumer electronics, automotive systems, and industrial controls.
Equivalent
The MCP6401T-E/OT is a low-power, single operational amplifier by Microchip. Equivalent products would include:
1. LMV321 by Texas Instruments - Low-power op-amp.
2. TLV3011 by Texas Instruments - Micro-power op-amp with similar features.
3. LMC7101 by Texas Instruments - Ultra-low power op-amp.
4. OPA349 by Texas Instruments - Low-voltage, low-power op-amp.
Ensure compatibility by checking specific parameters like voltage range, bandwidth, and power consumption.
1. LMV321 by Texas Instruments - Low-power op-amp.
2. TLV3011 by Texas Instruments - Micro-power op-amp with similar features.
3. LMC7101 by Texas Instruments - Ultra-low power op-amp.
4. OPA349 by Texas Instruments - Low-voltage, low-power op-amp.
Ensure compatibility by checking specific parameters like voltage range, bandwidth, and power consumption.
Features
The MCP6401T-E/OT is a low-power, general-purpose operational amplifier from Microchip Technology. It features a wide supply voltage range from 1.8V to 6.0V, making it versatile for various applications. The device offers a low quiescent current of only 45 µA, which is ideal for battery-operated systems. It delivers a typical gain bandwidth product of 1 MHz, providing a good balance between performance and power consumption.
Other key features include a rail-to-rail input and output, which maximizes the dynamic range, and a low input offset voltage of typically 4.5 mV, ensuring precision in signal processing tasks. The MCP6401T-E/OT is unity-gain stable and supports a slew rate of 0.5 V/µs, suitable for handling rapid signal changes. It is packaged in a compact SOT-23-5 package, making it suitable for space-constrained designs. Additionally, it is designed to operate over the extended temperature range of -40°C to +125°C, ensuring reliable performance in harsh environments. These features make it suitable for applications such as sensor interfacing, signal conditioning, and battery-powered devices.
Other key features include a rail-to-rail input and output, which maximizes the dynamic range, and a low input offset voltage of typically 4.5 mV, ensuring precision in signal processing tasks. The MCP6401T-E/OT is unity-gain stable and supports a slew rate of 0.5 V/µs, suitable for handling rapid signal changes. It is packaged in a compact SOT-23-5 package, making it suitable for space-constrained designs. Additionally, it is designed to operate over the extended temperature range of -40°C to +125°C, ensuring reliable performance in harsh environments. These features make it suitable for applications such as sensor interfacing, signal conditioning, and battery-powered devices.
Pinout
The MCP6401T-E/OT is a single-channel operational amplifier in a SOT-23-5 package, which means it has five pins. The pin functions are as follows:
1. VDD (Pin 1): This is the positive supply voltage pin. It provides the necessary power for the op-amp to operate.
2. Vin- (Pin 2): This is the inverting input terminal. It is used to apply the input voltage signal that will be inverted in the output.
3. Vin+ (Pin 3): This is the non-inverting input terminal. It is used to apply the input voltage signal that will be amplified without inversion.
4. VSS (Pin 4): This is the ground or negative supply voltage pin.
5. Vout (Pin 5): This is the output terminal where the amplified signal is obtained.
The MCP6401T-E/OT is known for its low power consumption, rail-to-rail input/output capabilities, and is suitable for various applications including sensor interfacing and battery-powered devices.
1. VDD (Pin 1): This is the positive supply voltage pin. It provides the necessary power for the op-amp to operate.
2. Vin- (Pin 2): This is the inverting input terminal. It is used to apply the input voltage signal that will be inverted in the output.
3. Vin+ (Pin 3): This is the non-inverting input terminal. It is used to apply the input voltage signal that will be amplified without inversion.
4. VSS (Pin 4): This is the ground or negative supply voltage pin.
5. Vout (Pin 5): This is the output terminal where the amplified signal is obtained.
The MCP6401T-E/OT is known for its low power consumption, rail-to-rail input/output capabilities, and is suitable for various applications including sensor interfacing and battery-powered devices.
Manufacturer
The MCP6401T-E/OT is manufactured by Microchip Technology Inc. Microchip Technology is a leading American semiconductor company that specializes in the development and production of microcontrollers, mixed-signal, analog, and Flash-IP integrated circuits. The company provides a wide range of solutions for embedded control applications, which are used in various products and systems across industries such as automotive, industrial automation, consumer electronics, and telecommunications. Microchip is known for its comprehensive range of microcontroller products and its focus on providing innovative solutions to its customers.
Application
The MCP6401T-E/OT is a single operational amplifier designed for low-power applications. It is commonly used in areas such as:
1. Portable Electronics: Battery-operated devices due to its low power consumption.
2. Sensor Interfaces: Amplifying signals from various sensors.
3. Medical Instruments: Low-power medical diagnostic equipment.
4. Analog Signal Processing: Filtering and signal conditioning.
5. Consumer Electronics: Audio devices and appliances needing precise signal amplification.
6. Industrial Applications: Monitoring and data acquisition systems.
Its wide supply voltage range and rail-to-rail output make it versatile for numerous electronic designs requiring efficient power use and reliable performance.
1. Portable Electronics: Battery-operated devices due to its low power consumption.
2. Sensor Interfaces: Amplifying signals from various sensors.
3. Medical Instruments: Low-power medical diagnostic equipment.
4. Analog Signal Processing: Filtering and signal conditioning.
5. Consumer Electronics: Audio devices and appliances needing precise signal amplification.
6. Industrial Applications: Monitoring and data acquisition systems.
Its wide supply voltage range and rail-to-rail output make it versatile for numerous electronic designs requiring efficient power use and reliable performance.
Package
The MCP6401T-E/OT is an operational amplifier from Microchip Technology. It is available in a SOT-23 package type, which is a small-outline, surface-mount package commonly used for compact electronic components.
