規格
| 屬性 | 價值 |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| NumberofI/O | 16 |
| Interface | SPI |
| InterruptOutput | Yes |
| OutputType | Push-Pull |
| Current-OutputSource/Sink | 25mA |
| ClockFrequency | 10 MHz |
| Voltage-Supply | 1.8V ~ 5.5V |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package/Case | 28-SSOP (0.209, 5.30mm Width) |
概述
Description
The MCP23S17T-E/SS is a 16-bit I/O expander from Microchip Technology, designed to interface with microcontrollers via the SPI (Serial Peripheral Interface) protocol. It allows for the expansion of input/output pins, ideal for applications requiring additional I/O without increasing the microcontroller pin count. The device operates over a wide voltage range of 1.8V to 5.5V, making it versatile for various systems. Each GPIO pin can be configured for input or output, with support for internal pull-up resistors and interrupt-on-change capability. This makes it suitable for tasks like monitoring button presses or driving LEDs.
The MCP23S17T-E/SS features addressable control registers, allowing up to eight devices on the same SPI bus. It operates at speeds up to 10 MHz and includes features such as hardware address pins for device selection. Packaged in a 28-pin SSOP, it is ideal for space-constrained applications. This expander provides a robust solution for increasing I/O capabilities in embedded systems efficiently.
The MCP23S17T-E/SS features addressable control registers, allowing up to eight devices on the same SPI bus. It operates at speeds up to 10 MHz and includes features such as hardware address pins for device selection. Packaged in a 28-pin SSOP, it is ideal for space-constrained applications. This expander provides a robust solution for increasing I/O capabilities in embedded systems efficiently.
Equivalent
The MCP23S17T-E/SS is a 16-bit I/O expander with SPI interface. Equivalent products include:
1. MCP23S17-E/SS (Microchip) - Different temperature range
2. MCP23017-E/SS (Microchip) - I2C interface version
3. MAX7301 (Maxim Integrated) - 20-port I/O expander with SPI
4. PCF8575 (NXP) - 16-bit I/O expander with I2C
5. SX1509 (Semtech) - 16 I/O expander with I2C/SPI
Check datasheets for exact compatibility and features.
1. MCP23S17-E/SS (Microchip) - Different temperature range
2. MCP23017-E/SS (Microchip) - I2C interface version
3. MAX7301 (Maxim Integrated) - 20-port I/O expander with SPI
4. PCF8575 (NXP) - 16-bit I/O expander with I2C
5. SX1509 (Semtech) - 16 I/O expander with I2C/SPI
Check datasheets for exact compatibility and features.
Features
The MCP23S17T-E/SS is a 16-bit I/O expander from Microchip Technology, featuring an SPI interface, which allows for easy integration with microcontrollers that require additional I/O pins. Key features include:
1. 16 I/O Pins: Configurable as inputs or outputs for flexible design applications.
2. SPI Interface: High-speed communication through Serial Peripheral Interface for efficient data transfer.
3. Interrupt Output: Two interrupt pins (INTA and INTB) to indicate changes on the input pins.
4. Configurable Pull-Up Resistors: Internal pull-up resistors that can be enabled or disabled on each pin for input operations.
5. Programmable Polarity: Ability to invert the polarity of the input pins.
6. I/O Pin Latching: Outputs can be latched to maintain the state even if the microcontroller resets.
7. Operating Voltage: 1.8V to 5.5V, making it suitable for both low-power and standard applications.
8. Hardware Address Pins: Up to eight devices can be connected on the same bus by using the hardware address pins.
9. Temperature Range: Operates between -40°C to +125°C, suitable for industrial environments.
10. Compact Package: Available in 28-pin SSOP, providing a compact solution for expanding I/O capabilities.
1. 16 I/O Pins: Configurable as inputs or outputs for flexible design applications.
2. SPI Interface: High-speed communication through Serial Peripheral Interface for efficient data transfer.
3. Interrupt Output: Two interrupt pins (INTA and INTB) to indicate changes on the input pins.
4. Configurable Pull-Up Resistors: Internal pull-up resistors that can be enabled or disabled on each pin for input operations.
5. Programmable Polarity: Ability to invert the polarity of the input pins.
6. I/O Pin Latching: Outputs can be latched to maintain the state even if the microcontroller resets.
7. Operating Voltage: 1.8V to 5.5V, making it suitable for both low-power and standard applications.
8. Hardware Address Pins: Up to eight devices can be connected on the same bus by using the hardware address pins.
9. Temperature Range: Operates between -40°C to +125°C, suitable for industrial environments.
10. Compact Package: Available in 28-pin SSOP, providing a compact solution for expanding I/O capabilities.
Pinout
The MCP23S17T-E/SS is a 16-bit I/O expander with SPI interface. It features a 28-pin SSOP package. Key functionalities include:
- 16 I/O Pins: Configurable as input or output.
- SPI Interface: Uses a 4-wire SPI protocol for communication.
- Interrupt Output: Provides interrupt-on-change capability for the I/O pins.
- Configuration Registers: Allows for control over I/O direction, polarity inversion, and more.
- Voltage Range: Operates at 1.8V to 5.5V, making it versatile for various applications.
- 100 kHz to 10 MHz: SPI clock speed range.
These features make it suitable for expanding microcontroller I/O capabilities in embedded systems.
- 16 I/O Pins: Configurable as input or output.
- SPI Interface: Uses a 4-wire SPI protocol for communication.
- Interrupt Output: Provides interrupt-on-change capability for the I/O pins.
- Configuration Registers: Allows for control over I/O direction, polarity inversion, and more.
- Voltage Range: Operates at 1.8V to 5.5V, making it versatile for various applications.
- 100 kHz to 10 MHz: SPI clock speed range.
These features make it suitable for expanding microcontroller I/O capabilities in embedded systems.
Manufacturer
The MCP23S17T-E/SS is manufactured by Microchip Technology Inc. Microchip is a leading provider of microcontroller, mixed-signal, analog, and Flash-IP solutions. The company focuses on providing low-risk product development, lower total system cost, and faster time to market for thousands of diverse customer applications worldwide. Microchip's products serve various industries, including automotive, industrial, consumer, aerospace, and communications. The company is known for its extensive portfolio of microcontrollers, memory, and analog semiconductors, and it offers comprehensive development tools to support its product range.
Application
The MCP23S17T-E/SS is a 16-bit I/O expander with SPI interface, commonly used in applications where microcontroller I/O ports are insufficient. Key application areas include:
1. Embedded Systems: Expanding I/O capabilities for various embedded applications.
2. Consumer Electronics: Managing additional buttons, LEDs, and sensors.
3. Industrial Automation: Controlling additional peripheral devices and switches.
4. Home Automation: Extending I/O for smart home devices.
5. Data Acquisition Systems: Integrating more sensors and input devices.
6. Automotive Systems: Expanding controls and displays in vehicles.
Its use of SPI for communication allows for fast data transfer and easy integration into existing systems.
1. Embedded Systems: Expanding I/O capabilities for various embedded applications.
2. Consumer Electronics: Managing additional buttons, LEDs, and sensors.
3. Industrial Automation: Controlling additional peripheral devices and switches.
4. Home Automation: Extending I/O for smart home devices.
5. Data Acquisition Systems: Integrating more sensors and input devices.
6. Automotive Systems: Expanding controls and displays in vehicles.
Its use of SPI for communication allows for fast data transfer and easy integration into existing systems.
Package
The MCP23S17T-E/SS is a 28-pin SSOP (Shrink Small Outline Package) IC.
