MAX764CSA

圖片僅供參考

MAX764CSA

+物料清單

IC REG BCK BST ADJ/-5V 8SOIC

  • 製造商類比設備股份有限公司/Maxim集成

  • 製造商部分 #MAX764CSA

  • 包裹 SOP-8

  • 有存貨7511

365 天品質保證

7*24 小時服務保證

90-日售後保障

正品保證

規格

屬性 價值
Package / Case Tube,Tube
Part Status Obsolete
Function Step-Up/Step-Down
Output Configuration Negative
Topology Buck-Boost
Output Type Adjustable (Fixed)
Number of Outputs 1
Voltage - Input (Min) 3V
Voltage - Input (Max) 16V
Voltage - Output (Min/Fixed) -1V (-5V)
Voltage - Output (Max) -16V
Current - Output 260mA
Frequency - Switching 300kHz
Synchronous Rectifier No
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Surface Mount

概述

Description

Introduction to MAX764CSA: The MAX764CSA is a Maxim Integrated DC-DC converter IC in the MAX764 family. It’s a compact switch‑mode regulator intended for portable or battery‑powered designs, used to derive a regulated output from a lower input rail. The device integrates (as applicable) the switching controller and switch element; external inductors, capacitors, and a feedback network are used to set the output. The “CSA” suffix identifies a specific package/variant (and sometimes temperature grade) within the MAX764 family. Typical uses include generating bias or intermediate rails for microcontrollers, LCD bias supplies, or other compact, efficient rails in small products. To design with it, consult the datasheet for exact electrical specs (input/output ranges, current capability, efficiency), pinout, and recommended external components and app circuits. Note that multiple configurations exist in the MAX764 family (boost, buck, or other topologies), so be sure you’re using the correct variant for your target rail. If you want, I can pull up the exact datasheet details.

Equivalent

Equivalents depend on the device’s function and specs. MAX764CSA’s role (DC-DC converter, LDO, or charge pump), input/output voltages, current, and package determine cross‑refs. Please provide:
- the device type or a link to its datasheet
- Vin, Vout, Iout, package/pinout
With that, I can propose RC (cross references) from TI, Analog Devices, LTC, Onsemi that match the same ratings.

Pinout

8 pins. Function: MAX764CSA is an 8‑pin switched-capacitor charge‑pump inverter that generates a negative output from a positive input (creates a negative rail using external capacitors). Typically used to produce a negative supply (e.g., -5V from +5V) from a single supply.

Manufacturer

Manufacturer: Maxim Integrated (now part of Analog Devices, Inc.).
Company type: A semiconductor company specializing in analog and mixed-signal integrated circuits (power management, interface, and data-conversion ICs).

Application

Application areas of MAX764CSA:
- Portable, battery-powered devices requiring efficient DC-DC conversion (handheld meters, wearables, wireless sensors).
- Embedded systems powering microcontrollers, DSPs, ADC/DAC front-ends with stable rails.
- Automotive and industrial instrumentation needing compact, efficient regulators.
- Consumer electronics and telecom equipment requiring multi-rail generation in a small form factor.
- Medical devices and portable monitoring equipment with strict power constraints.
- Any application needing a small, high-efficiency regulator to replace linear regulators and extend battery life.

Package

MAX764CSA is in an 8-pin Small-Outline IC package (SO-8), typically RoHS-compliant/lead-free.

與MAX764CSA相關的產品