圖片僅供參考
MAX5479EUD+T
+物料清單IC DGT POT 100KOHM 256TP 14TSSOP
-
製造商類比設備股份有限公司/Maxim集成
-
製造商部分 #MAX5479EUD+T
-
有存貨5011
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Supplier | Analog Devices Inc./Maxim Integrated |
| Package | Tape & Reel (TR) |
| ProductStatus | Active |
| Taper | Linear |
| Configuration | Potentiometer |
| NumberofCircuits | 2 |
| NumberofTaps | 256 |
| Resistance(Ohms) | 100k |
| Interface | I²C |
| MemoryType | Non-Volatile |
| Voltage-Supply | 2.7V ~ 5.25V |
| Features | Selectable Address |
| Tolerance | ±25% |
| TemperatureCoefficient(Typ) | 70ppm/°C |
| MountingType | Surface Mount |
| SupplierDevicePackage | 14-TSSOP |
| Package/Case | 14-TSSOP (0.173, 4.40mm Width) |
| OperatingTemperature | -40°C ~ 85°C |
概述
Description
Introduction to MAX5479EUD+T
- What it is: A 12‑bit DAC from Maxim Integrated that converts a serial digital code into an analog output for precision control in instrumentation and embedded systems.
- Interface: SPI‑like serial input (data, clock, chip select) with options for coordinated updates (e.g., LDAC) depending on variant.
- Output: typically a voltage output (often with an external reference or internal reference option) or a current output that requires a conversion stage with an op‑amp.
- Key features: monotonic operation, low glitch, low power, and software‑controlled power‑down/update modes.
- Packaging: EUD denotes a 16‑pin small‑outline package; +T indicates tape‑and‑reel packaging for mass production.
- Applications: programmable references, calibration, instrumentation, servo control, waveform generation.
- Quick notes: exact electrical characteristics, reference requirements, and pinout vary by variant; consult the datasheet for your specific revision before design.
- What it is: A 12‑bit DAC from Maxim Integrated that converts a serial digital code into an analog output for precision control in instrumentation and embedded systems.
- Interface: SPI‑like serial input (data, clock, chip select) with options for coordinated updates (e.g., LDAC) depending on variant.
- Output: typically a voltage output (often with an external reference or internal reference option) or a current output that requires a conversion stage with an op‑amp.
- Key features: monotonic operation, low glitch, low power, and software‑controlled power‑down/update modes.
- Packaging: EUD denotes a 16‑pin small‑outline package; +T indicates tape‑and‑reel packaging for mass production.
- Applications: programmable references, calibration, instrumentation, servo control, waveform generation.
- Quick notes: exact electrical characteristics, reference requirements, and pinout vary by variant; consult the datasheet for your specific revision before design.
Pinout
Pin count: 28 pins (MAX5479EUD+T is a 28‑pin package).
Function: A digital-to-analog converter (DAC) with a serial (I2C-compatible) interface that provides a programmable analog voltage output.
Function: A digital-to-analog converter (DAC) with a serial (I2C-compatible) interface that provides a programmable analog voltage output.
Manufacturer
- Manufacturer: Maxim Integrated Products (now part of Analog Devices, Inc.)
- What kind of company: A fabless semiconductor company specializing in analog and mixed-signal integrated circuits.
- What kind of company: A fabless semiconductor company specializing in analog and mixed-signal integrated circuits.
Application
Applications of MAX5479EUD+T (a high-precision DAC):
- Precision analog output and calibration in instrumentation and data acquisition.
- Programmable gain/offset in ADC/DAC front-ends and servo control loops.
- Waveform generation and stimulus generation in test and measurement equipment.
- Voltage-reference generation and DAC-controlled regulation in industrial automation.
- Programmable current sources using external op-amps for sensors and transducers.
- Automotive/medical instrumentation requiring low-noise, high-accuracy D/A conversion.
- Precision analog output and calibration in instrumentation and data acquisition.
- Programmable gain/offset in ADC/DAC front-ends and servo control loops.
- Waveform generation and stimulus generation in test and measurement equipment.
- Voltage-reference generation and DAC-controlled regulation in industrial automation.
- Programmable current sources using external op-amps for sensors and transducers.
- Automotive/medical instrumentation requiring low-noise, high-accuracy D/A conversion.
Package
8-pin MSOP (MSOP-8) package. The +T suffix indicates Tape & Reel packaging.
