規格
| 屬性 | 價值 |
| Package | Tube,Tube |
| ProductStatus | Obsolete |
| Type | Transceiver |
| Protocol | RS422, RS485 |
| NumberofDrivers/Receivers | 1/1 |
| Duplex | Full |
| ReceiverHysteresis | 50 mV |
| DataRate | 10Mbps |
| Voltage-Supply | 3V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C |
| MountingType | Surface Mount |
| Package/Case | 14-SOIC (0.154, 3.90mm Width) |
概述
Description
Introduction to MAX3491ESD
- What it is: Maxim/Analog Devices MAX3491ESD is a multi-line ESD protection diode array designed to protect high-speed data interfaces from electrostatic discharge and voltage transients.
- What it does: Provides low-capacitance protection diodes that clamp ESD events to the supply rails (Vcc and GND), safeguarding downstream transceivers and controllers without noticeably loading the signal.
- Key benefits: Very low input capacitance and leakage, fast clamping, small package, easy integration near connectors or interface ICs; suitable for preserving signal integrity on high-speed lines.
- Typical uses: Protects interfaces such as USB, CAN, RS-485/RS-422, HDMI/video links, camera/data lines, and other digital interfaces where ESD protection is required.
- How it works: Each protected line includes diode paths to Vcc/GND. During an ESD surge, diodes conduct to the rails, limiting the voltage seen by the protected device.
- Quick usage note: Place MAX3491ESD close to the connector or interface, connect lines to protected I/O, supply rails to Vcc and GND, and follow layout recommendations. Refer to the datasheet for exact channel count, ratings, and capacitance.
- What it is: Maxim/Analog Devices MAX3491ESD is a multi-line ESD protection diode array designed to protect high-speed data interfaces from electrostatic discharge and voltage transients.
- What it does: Provides low-capacitance protection diodes that clamp ESD events to the supply rails (Vcc and GND), safeguarding downstream transceivers and controllers without noticeably loading the signal.
- Key benefits: Very low input capacitance and leakage, fast clamping, small package, easy integration near connectors or interface ICs; suitable for preserving signal integrity on high-speed lines.
- Typical uses: Protects interfaces such as USB, CAN, RS-485/RS-422, HDMI/video links, camera/data lines, and other digital interfaces where ESD protection is required.
- How it works: Each protected line includes diode paths to Vcc/GND. During an ESD surge, diodes conduct to the rails, limiting the voltage seen by the protected device.
- Quick usage note: Place MAX3491ESD close to the connector or interface, connect lines to protected I/O, supply rails to Vcc and GND, and follow layout recommendations. Refer to the datasheet for exact channel count, ratings, and capacitance.
Pinout
Pin count: 8 pins (SOIC/MSOP package).
Function: An 8‑pin, half‑duplex RS‑485/RS‑422 differential transceiver with ESD protection. Pinout typically includes DI (data in), RO (data out), DE (driver enable), /RE (receiver enable), A and B (differential bus), VCC and GND. It interfaces a microcontroller to an RS‑485/RS‑422 bus.
Function: An 8‑pin, half‑duplex RS‑485/RS‑422 differential transceiver with ESD protection. Pinout typically includes DI (data in), RO (data out), DE (driver enable), /RE (receiver enable), A and B (differential bus), VCC and GND. It interfaces a microcontroller to an RS‑485/RS‑422 bus.
Manufacturer
The MAX3491ESD is manufactured by Maxim Integrated. Maxim Integrated is an American multinational semiconductor company that designs, develops, and manufactures analog and mixed-signal integrated circuits. It is now part of Analog Devices.
Application
- High-speed ESD protection for data lines
- Interfaces typically protected: USB, HDMI/DisplayPort, LVDS, Ethernet, CAN/RS-422/485, UART, and other serial interfaces
- Applications: mobile/consumer electronics, PCs and peripherals
- Automotive and industrial environments needing rugged ESD protection
- Used at connectors, backplanes, cables, and PCB I/O to safeguard interfaces and system integrity
- Suitable for medical devices and any system requiring robust ESD/surge protection on signal lines
- Interfaces typically protected: USB, HDMI/DisplayPort, LVDS, Ethernet, CAN/RS-422/485, UART, and other serial interfaces
- Applications: mobile/consumer electronics, PCs and peripherals
- Automotive and industrial environments needing rugged ESD protection
- Used at connectors, backplanes, cables, and PCB I/O to safeguard interfaces and system integrity
- Suitable for medical devices and any system requiring robust ESD/surge protection on signal lines
Package
8-pin surface-mount package, typically SOIC-8 (check the datasheet for the exact variant).
