規格
| 屬性 | 價值 |
| Supplier | STMicroelectronics |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | EEPROM |
| Technology | EEPROM |
| Memory Size | 32Kb (4K x 8) |
| Memory Interface | SPI |
| Clock Frequency | 20 MHz |
| Write Cycle Time - Word Page | 5ms |
| Voltage - Supply | 2.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
概述
Description
Introduction: M95320-WDW6TP is a serial non-volatile memory device in the M95x family, typically an I2C EEPROM used to store small data that must persist without power.
Key specs and features:
- Capacity: 32 kbit (4 KB) memory organized as 4K x 8
- Interface: I2C (2-wire); supports standard and fast I2C modes
- Supply: typically 2.7–5.5 V
- Package: 8-pin device
- Operations: byte and page writes (up to a page size, e.g., 32 bytes), random/read access
- Power: low-power standby; write time around a few milliseconds
- Endurance and protection: hardware write-protect and basic write-cycle management
Typical applications:
- Storing configuration data, calibration constants, device IDs, and small logs for embedded systems
Usage notes:
- Use the I2C address available with A0–A2 pins; respect page boundaries during page writes
- For exact timing, voltage, and environmental specs, consult the official datasheet from the manufacturer. If you share the maker, I can tailor the summary precisely.
Key specs and features:
- Capacity: 32 kbit (4 KB) memory organized as 4K x 8
- Interface: I2C (2-wire); supports standard and fast I2C modes
- Supply: typically 2.7–5.5 V
- Package: 8-pin device
- Operations: byte and page writes (up to a page size, e.g., 32 bytes), random/read access
- Power: low-power standby; write time around a few milliseconds
- Endurance and protection: hardware write-protect and basic write-cycle management
Typical applications:
- Storing configuration data, calibration constants, device IDs, and small logs for embedded systems
Usage notes:
- Use the I2C address available with A0–A2 pins; respect page boundaries during page writes
- For exact timing, voltage, and environmental specs, consult the official datasheet from the manufacturer. If you share the maker, I can tailor the summary precisely.
Equivalent
Equivalent products for M95320-WDW6TP (32Kbit I2C serial EEPROM) include:
- ST M24C32-W
- Atmel/Microchip AT24C32 (AT24C32A/AT24C32C)
- Microchip 24LC32B / 24AA32
- Onsemi CAT24C32
Notes: verify supply voltage, package, timing, and exact I2C compatibility for your design.
- ST M24C32-W
- Atmel/Microchip AT24C32 (AT24C32A/AT24C32C)
- Microchip 24LC32B / 24AA32
- Onsemi CAT24C32
Notes: verify supply voltage, package, timing, and exact I2C compatibility for your design.
Pinout
- Pin count: 8 pins (8-pin package, e.g., SO-8/TSSOP-8).
- Function: 32-kbit serial SPI EEPROM memory (M95320) with standard SPI interface (CS, SCK, SI, SO) plus WP and HOLD, for non-volatile data storage.
- Function: 32-kbit serial SPI EEPROM memory (M95320) with standard SPI interface (CS, SCK, SI, SO) plus WP and HOLD, for non-volatile data storage.
Manufacturer
Manufacturer: STMicroelectronics (ST).
What kind of company: STMicroelectronics is a global semiconductor company that designs, manufactures, and markets a broad range of integrated circuits and electronic components (memory, microcontrollers, sensors, power devices, etc.) for the electronics industry.
What kind of company: STMicroelectronics is a global semiconductor company that designs, manufactures, and markets a broad range of integrated circuits and electronic components (memory, microcontrollers, sensors, power devices, etc.) for the electronics industry.
Application
Typical applications:
- Non-volatile storage for embedded systems (MCU parameters, calibration data)
- Configuration data, device IDs/serial numbers, and security keys
- Firmware boot flags and small recovery/configuration data
- Small data logging and event counters
- Automotive ECUs, industrial controllers, consumer electronics, printers, and networking gear needing persistent, low-power memory with reliable random read/write.
- Non-volatile storage for embedded systems (MCU parameters, calibration data)
- Configuration data, device IDs/serial numbers, and security keys
- Firmware boot flags and small recovery/configuration data
- Small data logging and event counters
- Automotive ECUs, industrial controllers, consumer electronics, printers, and networking gear needing persistent, low-power memory with reliable random read/write.
Package
8-pin SOIC (small-outline) package, RoHS (lead-free).
