圖片僅供參考
M24C64-FDW6TP
+物料清單IC EEPROM 64KBIT I2C 1MHZ 8TSSOP
-
製造商意法半導體
-
製造商部分 #M24C64-FDW6TP
-
有存貨5544
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Part Status | Active |
| DigiKey Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | EEPROM |
| Technology | EEPROM |
| Memory Size | 64Kbit |
| Memory Organization | 8K x 8 |
| Memory Interface | I2C |
| Clock Frequency | 1 MHz |
| Write Cycle Time - Word, Page | 5ms |
| Access Time | 450 ns |
| Voltage - Supply | 1.7V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173", 4.40mm Width) |
| Supplier Device Package | 8-TSSOP |
| Base Product Number | M24C64 |
概述
Description
The M24C64-FDW6TP is a 64 Kbit (8 Kbyte) EEPROM (Electrically Erasable Programmable Read-Only Memory) device, designed for non-volatile data storage. It uses a 2-wire I2C interface for communication, allowing multiple devices to be connected on the same bus. The device operates with a supply voltage range of 1.8V to 5.5V, making it suitable for low-power applications.
Key features include:
- Memory Size: 64 Kbits (8 Kbytes).
- Communication Protocol: I2C (Two-wire).
- Fast Write Cycle Time: Typically around 5 ms.
- Endurance: Capable of withstanding up to 1 million write/erase cycles.
- Data Retention: Typically 40 years at 85°C.
- Package Type: Available in a small footprint, suitable for space-constrained designs.
The M24C64-FDW6TP is commonly used in applications such as configuration storage, data logging, and firmware storage in embedded systems.
Key features include:
- Memory Size: 64 Kbits (8 Kbytes).
- Communication Protocol: I2C (Two-wire).
- Fast Write Cycle Time: Typically around 5 ms.
- Endurance: Capable of withstanding up to 1 million write/erase cycles.
- Data Retention: Typically 40 years at 85°C.
- Package Type: Available in a small footprint, suitable for space-constrained designs.
The M24C64-FDW6TP is commonly used in applications such as configuration storage, data logging, and firmware storage in embedded systems.
Equivalent
The M24C64-FDW6TP is a 64Kb EEPROM chip. Equivalent products include the AT24C64, 93C66, 24C64, and CAT24C64. These chips typically offer similar specifications, such as memory size, I2C interface, and voltage levels. Always verify specific electrical characteristics and pin configurations to ensure compatibility for your application.
Features
The M24C64-FDW6TP is a 64Kbit (8K x 8-bit) electrically erasable programmable read-only memory (EEPROM) device. Key features include:
1. Interface: It uses I2C (Inter-Integrated Circuit) communication, supporting multiple devices on the same bus.
2. Voltage Range: Operates within a supply voltage of 2.5V to 5.5V.
3. Speed: Supports data transmission speeds up to 1 MHz in fast mode.
4. Memory Organization: The memory is organized in 256 pages of 32 bytes for efficient data handling.
5. Endurance: Offers a high endurance of up to 1 million write/erase cycles per byte and a data retention of up to 40 years.
6. Package: Available in a small footprint SO8 package, suitable for space-constrained applications.
7. Write Protection: Features a write protection mechanism for data security during power failures.
This device is widely used in applications requiring non-volatile memory storage, including consumer electronics, industrial controls, and automotive systems.
1. Interface: It uses I2C (Inter-Integrated Circuit) communication, supporting multiple devices on the same bus.
2. Voltage Range: Operates within a supply voltage of 2.5V to 5.5V.
3. Speed: Supports data transmission speeds up to 1 MHz in fast mode.
4. Memory Organization: The memory is organized in 256 pages of 32 bytes for efficient data handling.
5. Endurance: Offers a high endurance of up to 1 million write/erase cycles per byte and a data retention of up to 40 years.
6. Package: Available in a small footprint SO8 package, suitable for space-constrained applications.
7. Write Protection: Features a write protection mechanism for data security during power failures.
This device is widely used in applications requiring non-volatile memory storage, including consumer electronics, industrial controls, and automotive systems.
Pinout
The M24C64-FDW6TP is a 64 Kbit (8 Kbyte) EEPROM memory device from STMicroelectronics. It features a total of 8 pins. The pin functions are as follows:
1. VCC: Power supply pin (typically +2.5V to +5.5V).
2. GND: Ground pin.
3. SDA: Serial Data Line for data transfer (I2C interface).
4. SCL: Serial Clock Line for timing control (I2C interface).
5. WP: Write Protect pin; if held high, prevents write operations.
6. A0, A1, A2: Address pins used to select one of the devices in a multi-device configuration on the I2C bus.
The device operates using the I2C communication protocol and is commonly used for applications requiring non-volatile data storage.
1. VCC: Power supply pin (typically +2.5V to +5.5V).
2. GND: Ground pin.
3. SDA: Serial Data Line for data transfer (I2C interface).
4. SCL: Serial Clock Line for timing control (I2C interface).
5. WP: Write Protect pin; if held high, prevents write operations.
6. A0, A1, A2: Address pins used to select one of the devices in a multi-device configuration on the I2C bus.
The device operates using the I2C communication protocol and is commonly used for applications requiring non-volatile data storage.
Manufacturer
The M24C64-FDW6TP is manufactured by STMicroelectronics, a multinational electronics and semiconductor manufacturer. STMicroelectronics is known for its wide range of products, including microcontrollers, sensors, power management devices, and memory chips. The company is headquartered in Geneva, Switzerland, and operates globally, serving various sectors such as automotive, industrial, consumer electronics, and communications. STMicroelectronics is recognized for its innovation and commitment to sustainability in technology development. The M24C64-FDW6TP is a 64Kb EEPROM (Electrically Erasable Programmable Read-Only Memory) device, commonly used in applications requiring non-volatile storage.
Application
The M24C64-FDW6TP is a 64Kb (8K x 8) EEPROM (Electrically Erasable Programmable Read-Only Memory) device. Its application areas include:
1. Consumer Electronics: Storing configuration settings and calibration data in devices like TVs, cameras, and audio equipment.
2. Industrial Automation: Saving machine settings and parameters in PLCs (Programmable Logic Controllers) and industrial devices.
3. Smart Meters: Retaining measurement data and configuration settings for energy and water meters.
4. Medical Devices: Storing patient data and device configurations in diagnostic and monitoring equipment.
5. Automotive: Keeping sensor calibration data and vehicle configuration settings.
Its I²C interface makes it versatile for various embedded applications.
1. Consumer Electronics: Storing configuration settings and calibration data in devices like TVs, cameras, and audio equipment.
2. Industrial Automation: Saving machine settings and parameters in PLCs (Programmable Logic Controllers) and industrial devices.
3. Smart Meters: Retaining measurement data and configuration settings for energy and water meters.
4. Medical Devices: Storing patient data and device configurations in diagnostic and monitoring equipment.
5. Automotive: Keeping sensor calibration data and vehicle configuration settings.
Its I²C interface makes it versatile for various embedded applications.
Package
The M24C64-FDW6TP is offered in a TSSOP (Thin Shrink Small Outline Package) type, specifically a 8-lead TSSOP package.
