圖片僅供參考
LTM8025EY#PBF
+物料清單DC DC CONVERTER 0.8-24V 72W
-
製造商ADI公司
-
製造商部分 #LTM8025EY#PBF
-
有存貨26425
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Series | µModule® |
| PartStatus | Active |
| BaseProductNumber | LTM8025 |
| Type | Non-Isolated PoL Module |
| NumberofOutputs | 1 |
| Voltage-Input(Min) | 3.6V |
| Voltage-Input(Max) | 36V |
| Voltage-Output1 | 0.8 ~ 24V |
| Current-Output(Max) | 3A |
| Applications | ITE (Commercial) |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package | 70-BBGA Module |
| Size/Dimension | 0.59" L x 0.35" W x 0.19" H (15.0mm x 9.0mm x 4.9mm) |
| SupplierDevicePackage | 70-BGA (15x9) |
| Packaging | Tray |
概述
Description
Introduction: LTM8025EY#PBF is a µModule DC-DC buck regulator from Analog Devices (formerly Linear Technology). It integrates the switching regulator controller, power MOSFETs, inductor, and supporting components into a single compact module, enabling a regulated output with minimal external parts.
Key points:
- Purpose: quick, compact power solution for microprocessors, FPGAs, and other digital loads.
- Features: high efficiency, good transient response, built-in protection (e.g., overcurrent/thermal), and enable/feedback options for setting the output.
- Packaging: EY#PBF denotes a Pb-free package variant with tape-and-reel (reel) packaging; part of the LTM µModule family.
- Use: drop-in replacement for discrete regulators where space and ease of design are priorities.
For exact electrical specs (input range, output voltage, current capability, efficiency, pins), consult the LTM8025 datasheet or product page.
Key points:
- Purpose: quick, compact power solution for microprocessors, FPGAs, and other digital loads.
- Features: high efficiency, good transient response, built-in protection (e.g., overcurrent/thermal), and enable/feedback options for setting the output.
- Packaging: EY#PBF denotes a Pb-free package variant with tape-and-reel (reel) packaging; part of the LTM µModule family.
- Use: drop-in replacement for discrete regulators where space and ease of design are priorities.
For exact electrical specs (input range, output voltage, current capability, efficiency, pins), consult the LTM8025 datasheet or product page.
Equivalent
Direct one-to-one equivalents for LTM8025EY#PBF do not have exact cross-references. Closest options are other µModule regulators in the LTM family (e.g., LTM8xx) or TI Murata/OKL-module equivalents. Please specify your required input range, output voltage(s), current, and package so I can propose precise cross-reference parts.
Features
LTM8025EY#PBF features (concise):
- Fully integrated µModule regulator: two-phase interleaved synchronous buck with internal inductor, MOSFETs and controller.
- Wide input range and up to 25 A continuous output current.
- High efficiency and fast transient response; minimal external components.
- Output voltage adjustable via external resistor network (fixed-output options available).
- Remote sense and output-voltage sequencing for multi-rail systems.
- Protections: overcurrent/short-circuit, overtemperature shutdown, UVLO and current limit.
- Enable control and soft-start; status/reporting option for fault indication.
- Small Pb-free (RoHS) package; no external inductor or critical components for basic operation.
- Suitable for harsh environments with broad operating temperature range (typical -40°C to 125°C).
Note: for exact electrical specs (input range, voltage range, efficiency, and pinout), please consult the LTM8025EY#PBF datasheet.
- Fully integrated µModule regulator: two-phase interleaved synchronous buck with internal inductor, MOSFETs and controller.
- Wide input range and up to 25 A continuous output current.
- High efficiency and fast transient response; minimal external components.
- Output voltage adjustable via external resistor network (fixed-output options available).
- Remote sense and output-voltage sequencing for multi-rail systems.
- Protections: overcurrent/short-circuit, overtemperature shutdown, UVLO and current limit.
- Enable control and soft-start; status/reporting option for fault indication.
- Small Pb-free (RoHS) package; no external inductor or critical components for basic operation.
- Suitable for harsh environments with broad operating temperature range (typical -40°C to 125°C).
Note: for exact electrical specs (input range, voltage range, efficiency, and pinout), please consult the LTM8025EY#PBF datasheet.
Pinout
The LTM8025EY#PBF is supplied in a 14‑pin LGA µModule package (14 pins plus an exposed backside PCB pad). The pins provide:
- Power: VIN (input), VOUT (regulated output), GND (ground) and the exposed pad (power/thermal ground)
- Regulation/sensing: FB (feedback) and VOUT sense pins
- Control: RUN/SHDN (enable), TRACK/SS (soft‑start/track)
- Status/monitor: PGOOD/TR (power‑good / tracking)
- Clock/config: RT/SYNC or MODE (switching frequency/sync or mode selection)
- Internal supply: INTVCC or VCC (internal gate drive/bias)
- Misc: other control/configuration pins for current limit or operation mode per datasheet
For the exact pin names, numbering and functional descriptions, consult the LTM8025 datasheet from Analog Devices.
- Power: VIN (input), VOUT (regulated output), GND (ground) and the exposed pad (power/thermal ground)
- Regulation/sensing: FB (feedback) and VOUT sense pins
- Control: RUN/SHDN (enable), TRACK/SS (soft‑start/track)
- Status/monitor: PGOOD/TR (power‑good / tracking)
- Clock/config: RT/SYNC or MODE (switching frequency/sync or mode selection)
- Internal supply: INTVCC or VCC (internal gate drive/bias)
- Misc: other control/configuration pins for current limit or operation mode per datasheet
For the exact pin names, numbering and functional descriptions, consult the LTM8025 datasheet from Analog Devices.
Manufacturer
Manufacturer: Analog Devices, Inc. (part number LTM8025EY#PBF is an LTM-series µModule regulator originally from Linear Technology; Linear Technology was acquired by Analog Devices in 2017).
What kind of company: Analog Devices is a U.S.-based semiconductor company that designs and manufactures analog, mixed-signal, and power-management integrated circuits and modular power solutions (including µModule regulators) for industrial, automotive, communications, and consumer markets.
What kind of company: Analog Devices is a U.S.-based semiconductor company that designs and manufactures analog, mixed-signal, and power-management integrated circuits and modular power solutions (including µModule regulators) for industrial, automotive, communications, and consumer markets.
Application
Common application areas for LTM8025EY#PBF:
- Point-of-load regulators for CPUs/GPUs/ASICs/FPGA cores in servers, workstations, and data centers
- Embedded and portable devices needing compact, high-efficiency DC-DC conversion
- Networking and telecom equipment (Switches, routers, base stations) power rails
- Industrial automation, robotics, sensors, and motor controllers
- Automotive electronics and rugged, automotive-grade power solutions
- Prototyping, evaluation, and space-constrained/power-dense applications
Note: It’s a compact, integrated µModule DC-DC regulator suitable for tight spaces and high-current rails.
- Point-of-load regulators for CPUs/GPUs/ASICs/FPGA cores in servers, workstations, and data centers
- Embedded and portable devices needing compact, high-efficiency DC-DC conversion
- Networking and telecom equipment (Switches, routers, base stations) power rails
- Industrial automation, robotics, sensors, and motor controllers
- Automotive electronics and rugged, automotive-grade power solutions
- Prototyping, evaluation, and space-constrained/power-dense applications
Note: It’s a compact, integrated µModule DC-DC regulator suitable for tight spaces and high-current rails.
Package
LTM8025EY#PBF is supplied in a Pb‑free 36‑lead LGA (land grid array) µModule package.
