LM25574MTX

圖片僅供參考

IC REG BUCK ADJ 500MA 16TSSOP

365 天品質保證

7*24 小時服務保證

90-日售後保障

正品保證

規格

屬性 價值
Series SIMPLE SWITCHER®
Part Status Obsolete
Function Step-Down
Output Configuration Positive
Topology Buck
Output Type Adjustable
Number of Outputs 1
Voltage - Input (Min) 6V
Voltage - Input (Max) 42V
Voltage - Output (Min / Fixed) 1.225V
Voltage - Output (Max) 40V
Current - Output 500mA
Frequency - Switching 50kHz ~ 1MHz
Synchronous Rectifier No
Operating Temperature -40°C ~ 125°C (TJ)
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173", 4.40mm Width)
Supplier Device Package 16-TSSOP
Base Product Number LM25574

概述

Description

The LM25574MTX is a high-performance, low-noise, boost regulator designed for powering applications requiring efficient voltage conversion. It operates with a wide input voltage range, typically from 4.5V to 60V, making it suitable for various power sources. This device can deliver high output currents, up to several amps, while maintaining low ripple and minimal electromagnetic interference.
Key features include a built-in power switch, adjustable output voltage, and various protection mechanisms such as over-voltage, under-voltage lockout, and thermal shutdown. Its high switching frequency allows for smaller external components, enabling compact designs.
The LM25574MTX is ideal for applications in automotive, industrial, and consumer electronics where reliable power management is essential. It is available in a thermally enhanced package for improved heat dissipation. Overall, the LM25574MTX is a versatile solution for efficient DC-DC conversion in demanding environments.

Equivalent

The LM25574MTX is a high-efficiency, step-down switching regulator. Equivalent products include the TPS563201, LM2596, and LTC3780. These alternatives offer similar specifications in terms of voltage output, current handling, and efficiency for DC-DC conversion applications. Ensure to check specific datasheets for exact features and compatibility based on your design requirements.

Features

The LM25574MTX is a high-performance, low-dropout (LDO) linear voltage regulator designed for various applications. Key features include:
1. Output Voltage: Adjustable output from 0.8V to 5V.
2. Low Quiescent Current: Typically around 15 µA, enhancing battery life in portable applications.
3. High Output Current: Supports up to 1.5A output current capacity.
4. Low Dropout Voltage: Ensures reliable operation with a low input-output voltage difference.
5. Thermal Protection: Integrated thermal shutdown feature to prevent overheating.
6. Short-Circuit Protection: Safeguards the device from damage due to overcurrent conditions.
7. Power Supply Rejection Ratio (PSRR): High PSRR values improve output stability against input voltage fluctuations.
8. Wide Input Voltage Range: Operates from 2.7V to 20V input voltage range.
These features make the LM25574MTX suitable for powering RF devices, sensors, and other low-power electronic circuits.

Pinout

The LM25574MTX is a high-efficiency, synchronous step-down (buck) regulator designed for power management applications. It features a 20-pin HTQFN package.
Pin Count: 20 pins.
Key Functions:
1. VIN (Pin 1): Input voltage supply.
2. SW (Pins 2, 3, 4): Switching node connected to the inductor.
3. GND (Pin 5): Ground reference.
4. BOOT (Pin 6): Bootstrap capacitor connection.
5. COMP (Pin 7): Compensation network connection for stability.
6. CSN/ CSP (Pins 8, 9): Current sense pins for overcurrent protection.
7. EN (Pin 10): Enable pin to turn the regulator on/off.
8. RCS (Pins 11, 12): Resistor connection for setting current limit.
9. VOUT (Pin 13): Output voltage.
10. SS (Pin 14): Soft-start capacitor connection.
11. FB (Pin 15): Feedback pin for voltage regulation.
12. PGND (Pins 16, 17): Power ground pins for high current paths.
13. TRK (Pin 18): Tracking input for output voltage control.
14. PGOOD (Pin 19): Power good indicator output.
15. NC (Pin 20): No connect.
These functions facilitate efficient voltage regulation and power management in various electronic applications.

Manufacturer

The LM25574MTX is manufactured by Texas Instruments (TI), a prominent American technology company. Texas Instruments designs and produces semiconductors and various integrated circuits, which are essential components in electronic devices. The company is known for its innovation in analog and digital signal processing, embedded processing, and other semiconductor technologies. TI serves a wide range of markets, including automotive, industrial, consumer electronics, communications, and personal electronics. Founded in 1930, Texas Instruments has a long history and is recognized for its commitment to research and development, leading to numerous advancements in electronic technologies.

Application

The LM25574MTX is a high-efficiency, synchronous buck regulator primarily used in applications such as:
1. Power Supply for FPGAs and DSPs: Provides stable voltage for processing units.
2. Consumer Electronics: Powers devices like smartphones, tablets, and gaming consoles.
3. Telecommunications Equipment: Supplies voltage to networking devices and base stations.
4. Automotive Electronics: Used in power management systems for automotive applications.
5. Industrial Equipment: Powers sensors and control systems in automation and machinery.
6. Battery-Powered Devices: Optimizes energy usage in portable applications.
Its versatility makes it suitable for various low to medium power applications.

Package

The LM25574MTX is packaged in a 16-pin TSSOP (Thin Shrink Small Outline Package), which is designed for compact applications with limited board space.

與LM25574MTX相關的產品