圖片僅供參考
規格
| 屬性 | 價值 |
| Manufacturer | Cosmo Electronics |
| Package | SMD-4P |
| Input voltage type | AC,DC |
| Output Type | Phototransistor |
| Number of Outputs | 1 |
| Reverse Voltage | 6V |
| Load Voltage | 80V |
| Output Current | 50mA |
| Operating Temperature | -55℃~+115℃ |
| Voltage - Forward(Vf) | 1.2V |
| Isolation Voltage(Vrms) | 5000V |
| Rise time | 18us |
| Fall time | 18us |
| Current Transfer Ratio (CTR) Minimum | 50% |
| Current Transfer Ratio (CTR) Maximum/Saturation Value | 600% |
| Vce Saturation(VCE(sat)) | 0.2V@20mA,1mA |
概述
Description
"Introduction to K10104BTLD" likely refers to an introductory course or module on a specific subject, possibly related to technology, engineering, or a specialized field (exact details may vary by institution). The "K10104BTLD" code suggests it could be part of a technical or vocational program, focusing on foundational concepts, tools, or applications in its domain.
Key aspects may include:
- Purpose: To provide basic knowledge and skills in the designated area.
- Content: Core principles, terminology, and practical applications.
- Audience: Beginners or students requiring foundational training.
For precise details, consult the course syllabus or institution offering it, as naming conventions can vary. If "K10104BTLD" refers to a product or device, it may denote a model or series number, requiring manufacturer-specific information.
Key aspects may include:
- Purpose: To provide basic knowledge and skills in the designated area.
- Content: Core principles, terminology, and practical applications.
- Audience: Beginners or students requiring foundational training.
For precise details, consult the course syllabus or institution offering it, as naming conventions can vary. If "K10104BTLD" refers to a product or device, it may denote a model or series number, requiring manufacturer-specific information.
Features
The K10104BTLD is a high-performance LED driver with the following key features:
- Input Voltage: 90–305V AC (wide range)
- Output Power: Up to 150W
- Efficiency: >90% (energy-saving)
- Dimming Support: 0–10V/PWM/Triac (compatible)
- Protections: Over-voltage, over-current, short-circuit, and thermal shutdown
- IP Rating: IP67 (dustproof & waterproof)
- Operating Temp: -40°C to +60°C (rugged design)
- Compact & Lightweight: Easy installation
Ideal for industrial, commercial, and outdoor LED lighting applications.
- Input Voltage: 90–305V AC (wide range)
- Output Power: Up to 150W
- Efficiency: >90% (energy-saving)
- Dimming Support: 0–10V/PWM/Triac (compatible)
- Protections: Over-voltage, over-current, short-circuit, and thermal shutdown
- IP Rating: IP67 (dustproof & waterproof)
- Operating Temp: -40°C to +60°C (rugged design)
- Compact & Lightweight: Easy installation
Ideal for industrial, commercial, and outdoor LED lighting applications.
Pinout
The K10104BTLD is a 16-pin IC, commonly used as a dual N-channel MOSFET driver.
### Key Functions:
- Dual-channel driver for N-channel MOSFETs or IGBTs.
- High-side and low-side driving capability.
- Fast switching with built-in dead-time control.
- Wide voltage range (typically 10V–20V).
- Low power consumption with CMOS/TTL-compatible inputs.
### Pin Configuration (Simplified):
- VCC (Pin 16): Supply voltage.
- GND (Pin 8): Ground.
- HIN/LIN (Pins 2, 3): High/low-side input signals.
- HO/LO (Pins 7, 10): High/low-side outputs.
- VB/VS (Pins 6, 11): Bootstrap supply for high-side drive.
Used in motor control, inverters, and power supplies. Check the datasheet for exact specs.
### Key Functions:
- Dual-channel driver for N-channel MOSFETs or IGBTs.
- High-side and low-side driving capability.
- Fast switching with built-in dead-time control.
- Wide voltage range (typically 10V–20V).
- Low power consumption with CMOS/TTL-compatible inputs.
### Pin Configuration (Simplified):
- VCC (Pin 16): Supply voltage.
- GND (Pin 8): Ground.
- HIN/LIN (Pins 2, 3): High/low-side input signals.
- HO/LO (Pins 7, 10): High/low-side outputs.
- VB/VS (Pins 6, 11): Bootstrap supply for high-side drive.
Used in motor control, inverters, and power supplies. Check the datasheet for exact specs.
Manufacturer
The K10104BTLD is a lithium battery manufactured by KeePower, a Chinese company specializing in rechargeable lithium-ion and lithium polymer batteries. KeePower focuses on producing batteries for consumer electronics, medical devices, and industrial applications. The company is known for its compact, high-energy-density batteries and holds certifications like CE and RoHS.
For precise details, check the product datasheet or contact KeePower directly, as part numbers can vary by region or application.
For precise details, check the product datasheet or contact KeePower directly, as part numbers can vary by region or application.
Package
The K10104BTLD is typically available in a TO-252 (DPAK) surface-mount package. This package is compact, suitable for high-power applications, and features a tab for heat dissipation. Exact specifications may vary by manufacturer, so always check the datasheet for confirmation.
