規格
| 屬性 | 價值 |
| Package | Tube |
| ProductStatus | Active |
| SwitchType | Relay, Solenoid Driver |
| NumberofOutputs | 8 |
| Ratio-Input:Output | 1:1 |
| OutputConfiguration | High Side |
| Interface | Parallel |
| Voltage-Load | 10.5V ~ 36V |
| Current-Output(Max) | 700mA |
| RdsOn(Typ) | 120mOhm |
| Features | Auto Restart, Galvanic Isolation, Status Flag |
| FaultProtection | Current Limiting (Fixed), Over Temperature |
| OperatingTemperature | -40°C ~ 125°C (TJ) |
| MountingType | Surface Mount |
| SupplierDevicePackage | PowerSO-36 |
概述
Description
I’m not aware of a recognized ISO standard titled “ISO 8200B.” ISO numbers are precise, and this designation may be a typo or a field-specific document.
Pinout
Pin count: 8 pins (8-pin package, e.g., SOIC/DIP-8).
Function: Dual-channel digital isolator (galvanic isolation between two domains). It provides two unidirectional data channels from the input side (A) to the output side (B) with separate supply rails on each side (Vcc1/GND1 and Vcc2/GND2). Used to isolate microcontroller or logic from higher-voltage/noisy environments.
Function: Dual-channel digital isolator (galvanic isolation between two domains). It provides two unidirectional data channels from the input side (A) to the output side (B) with separate supply rails on each side (Vcc1/GND1 and Vcc2/GND2). Used to isolate microcontroller or logic from higher-voltage/noisy environments.
Package
ISO8200B is an 8-pin device; common package types are SOIC-8 and MSOP-8 (and DFN-8 for some revisions). Check the specific vendor’s datasheet for the exact package.
