規格
| 屬性 | 價值 |
| Package / Case | Tape & Reel (TR) |
| Part Status | Not For New Designs |
| Type | Digital |
| Axis | X (Pitch), Y (Roll), Z (Yaw) |
| Range° / s | ±250, 500, 1000, 2000 |
| Sensitivity(LSB / (° / s)) | 16.4 ~ 131 |
| Bandwidth | 5Hz ~ 256Hz |
| Output Type | I²C |
| Voltage - Supply | 2.1V ~ 3.6V |
| Supply Current | 6.5 mA |
| Features | Adjustable Bandwidth, Selectable Scale, Sleep Mode, Temperature Sensor |
| Operating Temperature | -40°C ~ 105°C (TA) |
概述
Description
The IMU-3000 is an Inertial Measurement Unit (IMU) designed for motion sensing and navigation applications. It integrates a three-axis gyroscope and a three-axis accelerometer, providing six degrees of freedom (6DOF) motion tracking. This component is often used in various devices, including drones, robotics, smartphones, and other portable electronics, to measure and report the velocity, orientation, and gravitational forces acting on the device.
The IMU-3000 is known for its high precision and low power consumption, making it suitable for applications requiring accurate motion detection. It employs advanced sensor fusion algorithms to combine the data from its sensors, thereby delivering reliable and stable outputs even in dynamic conditions. The device typically communicates with a microcontroller via an I2C or SPI interface, ensuring easy integration into electronic systems.
Overall, the IMU-3000 is valued for its compact design and robust performance, contributing to enhanced user experiences in applications like augmented reality, gaming, and vehicle navigation systems.
The IMU-3000 is known for its high precision and low power consumption, making it suitable for applications requiring accurate motion detection. It employs advanced sensor fusion algorithms to combine the data from its sensors, thereby delivering reliable and stable outputs even in dynamic conditions. The device typically communicates with a microcontroller via an I2C or SPI interface, ensuring easy integration into electronic systems.
Overall, the IMU-3000 is valued for its compact design and robust performance, contributing to enhanced user experiences in applications like augmented reality, gaming, and vehicle navigation systems.
Equivalent
The IMU-3000 is a 3-axis MEMS gyroscope often used in motion sensing applications. Equivalent products include the InvenSense MPU-6000 series, Bosch BMI160, STMicroelectronics L3GD20 and the ADI ADIS16460. These alternatives typically offer similar functionalities like 6-axis motion tracking or integration with accelerometers. When choosing an equivalent, consider factors such as the sensor's size, power consumption, noise performance, interface options, and specific application requirements.
Features
The IMU-3000 is a 3-axis gyroscope that is part of InvenSense's MotionTracking device family. Key features include:
1. 3-Axis Gyroscope: It measures rotational motion around the X, Y, and Z axes, making it suitable for a variety of motion-sensing applications.
2. Digital Output: The device provides digital output data via an I2C or SPI interface, which facilitates easy integration with other digital systems.
3. 16-bit ADCs: It includes 16-bit Analog-to-Digital Converters for high-resolution measurements.
4. Low Power Consumption: Designed for battery-powered applications, it features low power consumption to extend device battery life.
5. Embedded Temperature Sensor: The IMU-3000 has an integrated temperature sensor for compensating measurement variations due to temperature fluctuations.
6. User-Programmable: It offers programmable full-scale ranges and output data rates, allowing customization based on application needs.
7. FIFO Buffer: A FIFO buffer is available to reduce the need for interrupt service routines, optimizing system efficiency.
8. Shock Resistant: The device is designed to withstand high shock environments, ensuring reliability in demanding conditions.
These features make the IMU-3000 suitable for applications in consumer electronics, robotics, and industrial controls.
1. 3-Axis Gyroscope: It measures rotational motion around the X, Y, and Z axes, making it suitable for a variety of motion-sensing applications.
2. Digital Output: The device provides digital output data via an I2C or SPI interface, which facilitates easy integration with other digital systems.
3. 16-bit ADCs: It includes 16-bit Analog-to-Digital Converters for high-resolution measurements.
4. Low Power Consumption: Designed for battery-powered applications, it features low power consumption to extend device battery life.
5. Embedded Temperature Sensor: The IMU-3000 has an integrated temperature sensor for compensating measurement variations due to temperature fluctuations.
6. User-Programmable: It offers programmable full-scale ranges and output data rates, allowing customization based on application needs.
7. FIFO Buffer: A FIFO buffer is available to reduce the need for interrupt service routines, optimizing system efficiency.
8. Shock Resistant: The device is designed to withstand high shock environments, ensuring reliability in demanding conditions.
These features make the IMU-3000 suitable for applications in consumer electronics, robotics, and industrial controls.
Pinout
The IMU-3000 is a 3-axis gyroscope sensor used for motion tracking in various applications. It typically comes in a 16-pin package. Here is a brief overview of its pin functions:
1. VDD - Power supply input.
2. VLOGIC - Logic level power supply voltage.
3. GND - Ground.
4. CS - Chip select for SPI interface.
5. SCL/SCLK - Serial clock line for I2C/SPI interfaces.
6. SDA/SDI - Serial data input for I2C/SPI interfaces.
7. SDO - Serial data output for SPI interface.
8. FSYNC - Frame synchronization digital input.
9. INT - Interrupt output.
10. NC - No connect.
11. NC - No connect.
12. NC - No connect.
13. NC - No connect.
14. NC - No connect.
15. NC - No connect.
16. NC - No connect.
Please refer to the specific datasheet for detailed electrical characteristics and operational guidelines, as the actual pin configuration might vary slightly depending on the version or manufacturer’s specific design.
1. VDD - Power supply input.
2. VLOGIC - Logic level power supply voltage.
3. GND - Ground.
4. CS - Chip select for SPI interface.
5. SCL/SCLK - Serial clock line for I2C/SPI interfaces.
6. SDA/SDI - Serial data input for I2C/SPI interfaces.
7. SDO - Serial data output for SPI interface.
8. FSYNC - Frame synchronization digital input.
9. INT - Interrupt output.
10. NC - No connect.
11. NC - No connect.
12. NC - No connect.
13. NC - No connect.
14. NC - No connect.
15. NC - No connect.
16. NC - No connect.
Please refer to the specific datasheet for detailed electrical characteristics and operational guidelines, as the actual pin configuration might vary slightly depending on the version or manufacturer’s specific design.
Manufacturer
The IMU-3000 is manufactured by InvenSense, a company specializing in micro-electromechanical systems (MEMS) and sensor technologies. InvenSense is known for developing motion tracking devices, including gyroscopes, accelerometers, magnetometers, and other sensor solutions used in consumer electronics, automotive, industrial, and wearable applications. They focus on creating products that enhance user experience through more intuitive motion sensing and control.
Application
The IMU-3000 is a three-axis gyroscope commonly used in applications requiring motion sensing and stabilization. Key areas include:
1. Consumer Electronics: Enhances user interface in smartphones, tablets, and gaming devices by detecting motion and orientation changes.
2. Drones and UAVs: Provides stabilization and control, improving flight dynamics and navigation.
3. Robotics: Aids in balance and navigation for mobile robots and robotic arms.
4. Automotive Systems: Used in stability control systems and navigation for enhanced vehicle safety and performance.
5. Wearable Technology: Tracks movement and orientation for fitness and health monitoring.
These applications leverage the IMU-3000's ability to provide precise motion data.
1. Consumer Electronics: Enhances user interface in smartphones, tablets, and gaming devices by detecting motion and orientation changes.
2. Drones and UAVs: Provides stabilization and control, improving flight dynamics and navigation.
3. Robotics: Aids in balance and navigation for mobile robots and robotic arms.
4. Automotive Systems: Used in stability control systems and navigation for enhanced vehicle safety and performance.
5. Wearable Technology: Tracks movement and orientation for fitness and health monitoring.
These applications leverage the IMU-3000's ability to provide precise motion data.
Package
The IMU-3000 is typically packaged in a 16-pin quad flat no-leads (QFN) package. This package type is compact and designed to save space in devices, making it suitable for applications requiring small form factors. The QFN package provides a secure and stable environment for the integrated circuit, ensuring reliable performance in motion-sensing applications.
