圖片僅供參考
規格
| 屬性 | 價值 |
| Manufacturer | TDK |
| Package | LGA-14 |
概述
Description
- Compact size: Small footprint for space-constrained designs.
- Low power consumption: Ideal for battery-powered devices.
- High accuracy: ±2g to ±16g accelerometer range, ±125 to ±2000 dps gyroscope range.
- Digital interface: I²C/SPI for easy integration.
- Built-in processing: Features like FIFO buffer and programmable interrupts reduce host MCU load.
Common uses include gesture recognition, navigation, and stabilization systems. For detailed specs, refer to the datasheet.
Equivalent
- ICM-42605 (similar performance, newer)
- BMI270 (Bosch, low-power alternative)
- LSM6DSO (STMicroelectronics, comparable specs)
- MPU6050 (older, less advanced but widely used)
Check pin compatibility and specs for your application. For exact replacements, consult distributors or TDK's cross-reference guides.
Features
- 3-axis accelerometer (up to ±16g)
- 3-axis gyroscope (up to ±2000 dps)
- Low noise & high stability (gyro: 4 mdps/√Hz, accel: 100 µg/√Hz)
- Wide voltage range: 1.71V–3.6V
- Low power consumption: ~1.2mA (gyro + accel)
- I²C/SPI interfaces (up to 10MHz)
- Integrated FIFO (for data buffering)
- Programmable interrupts (motion, tap, free-fall, etc.)
- Compact size: 2.5mm × 3mm × 0.86mm (LGA)
- Operating temp: -40°C to +85°C
Ideal for drones, wearables, AR/VR, and robotics.
Pinout
- Triaxial accelerometer (±2g/±4g/±8g/±16g)
- Triaxial gyroscope (±125/±250/±500/±1000/±2000 dps)
- I²C/SPI digital interfaces (configurable)
- Low power consumption (~1.8 mA in operation)
- Integrated FIFO for data buffering
- Programmable interrupts (motion detection, etc.)
Pins include power (VDD, VDDIO), ground (GND), interface lines (SCL/SDA, CS/SPI), and interrupt (INT).
Application
1. Drones/UAVs – Stabilization and navigation.
2. Robotics – Motion control and balance.
3. AR/VR Devices – Head tracking and orientation.
4. Consumer Electronics – Smartphones, wearables for gesture recognition.
5. Industrial Equipment – Vibration monitoring and tilt sensing.
6. Automotive – Advanced driver assistance systems (ADAS).
Its low power consumption, high accuracy, and compact size make it ideal for motion-sensing applications.
Package
Frequently Asked Questions
Q: What is the package type of the ICM-40607-A?
A: It comes in a compact LGA-14 (Land Grid Array) package, suitable for space-constrained designs.
Q: Is the ICM-40607-A a motion sensor or an IMU?
A: It is a 6-axis inertial measurement unit (IMU) from TDK, integrating accelerometer and gyroscope.
Q: What typical applications does this component support?
A: It is ideal for consumer, industrial, and IoT applications requiring motion tracking, such as AR/VR, drones, and robotics.
Q: Can the ICM-40607-A operate in low-power modes?
A: Yes, it features low-power consumption modes to extend battery life in portable and wearable devices.
Q: Does this device support I2C or SPI communication interfaces?
A: Yes, it supports both I2C and SPI digital interfaces for flexible system integration.
Q: What is the supply voltage range for the ICM-40607-A?
A: Refer to the official datasheet for precise voltage range, as it is not listed in the provided parameters.
