規格
| 屬性 | 價值 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Frequency | 0Hz ~ 10GHz |
| P1d B | 18dBm |
| Gain | 12dB |
| Noise Figure | 7dB |
| RF Type | LTE, WiMax |
| Voltage - Supply | 5V |
| Supply Current | 76mA |
| Test Frequency | 6GHz ~ 10GHz |
| Mounting Type | Surface Mount |
概述
Description
The HMC788ALP2ETR is a monolithic microwave integrated circuit (MMIC) low noise amplifier (LNA) designed for high-frequency applications. It operates within the frequency range of 0.1 GHz to 11 GHz, making it suitable for a variety of wireless communication systems and radar applications. This amplifier is packaged in a 2 mm x 2 mm leadless plastic surface-mount package, which is compact and suitable for space-constrained designs.
Key features of the HMC788ALP2ETR include low noise figure, high gain, and good input and output return losses, making it effective in enhancing the signal-to-noise ratio in receiver chains. It typically offers a noise figure of around 1.5 dB and a gain of approximately 19 dB, with a supply voltage of around 5V.
The amplifier is designed to be easy to integrate into a variety of systems due to its matching and biasing features. It is well-suited for both commercial and military applications that require low noise amplification at microwave frequencies.
Key features of the HMC788ALP2ETR include low noise figure, high gain, and good input and output return losses, making it effective in enhancing the signal-to-noise ratio in receiver chains. It typically offers a noise figure of around 1.5 dB and a gain of approximately 19 dB, with a supply voltage of around 5V.
The amplifier is designed to be easy to integrate into a variety of systems due to its matching and biasing features. It is well-suited for both commercial and military applications that require low noise amplification at microwave frequencies.
Equivalent
The HMC788ALP2ETR is a low noise amplifier designed for RF and microwave applications. Equivalent or similar products might include low noise amplifiers from other manufacturers such as:
1. Analog Devices: ADL5521
2. Qorvo: TQP3M9039
3. Mini-Circuits: PSA4-5043+
4. Skyworks: SKY67150-396LF
These alternatives can offer similar performance characteristics, but it's important to verify specifications like gain, noise figure, frequency range, and power consumption to ensure suitability for your specific application.
1. Analog Devices: ADL5521
2. Qorvo: TQP3M9039
3. Mini-Circuits: PSA4-5043+
4. Skyworks: SKY67150-396LF
These alternatives can offer similar performance characteristics, but it's important to verify specifications like gain, noise figure, frequency range, and power consumption to ensure suitability for your specific application.
Features
The HMC788ALP2ETR is a low noise amplifier designed for use in RF and microwave applications. Key features include:
1. Frequency Range: It operates within a wide frequency range of 0.1 GHz to 10 GHz, making it versatile for various applications.
2. Gain: Offers a typical gain of 16.5 dB, providing significant amplification for weak signals.
3. Noise Figure: Features a low noise figure of typically 2 dB, enhancing signal clarity by minimizing noise.
4. Input/Output Return Loss: Provides good input and output return losses, which ensure efficient signal transmission and minimal reflection.
5. Supply Voltage: Operates with a supply voltage of 3V to 5V, offering flexibility for different power supply designs.
6. Package: Available in a compact 2x2 mm QFN package, which is ideal for space-constrained applications.
7. Operating Temperature: Supports a wide operating temperature range from -40°C to +85°C, suitable for various environmental conditions.
8. Applications: Suitable for use in cellular, broadband, and satellite communication systems, as well as test equipment and other RF applications.
These features make the HMC788ALP2ETR a robust choice for enhancing signal performance in demanding RF environments.
1. Frequency Range: It operates within a wide frequency range of 0.1 GHz to 10 GHz, making it versatile for various applications.
2. Gain: Offers a typical gain of 16.5 dB, providing significant amplification for weak signals.
3. Noise Figure: Features a low noise figure of typically 2 dB, enhancing signal clarity by minimizing noise.
4. Input/Output Return Loss: Provides good input and output return losses, which ensure efficient signal transmission and minimal reflection.
5. Supply Voltage: Operates with a supply voltage of 3V to 5V, offering flexibility for different power supply designs.
6. Package: Available in a compact 2x2 mm QFN package, which is ideal for space-constrained applications.
7. Operating Temperature: Supports a wide operating temperature range from -40°C to +85°C, suitable for various environmental conditions.
8. Applications: Suitable for use in cellular, broadband, and satellite communication systems, as well as test equipment and other RF applications.
These features make the HMC788ALP2ETR a robust choice for enhancing signal performance in demanding RF environments.
Pinout
The HMC788ALP2ETR is a high-linearity, RF amplifier typically used in various communication applications. It comes in a 2 mm x 2 mm leadless QFN package. The device has a pin count of 8.
Key functions include:
1. RF Input (Pin 1): The input for the RF signal.
2. Ground (Pins 2, 4, 6, and Exposed Pad): These pins are for grounding and should be connected to the RF and DC ground for proper operation.
3. RF Output/VD (Pin 3): This serves as both the RF output and the DC power supply input.
4. No Connect (Pin 5): This pin is not connected internally and can be grounded or left floating.
5. VBIAS (Pin 7): Provides the bias voltage for the amplifier.
6. VGG (Pin 8): Used for gate voltage control.
The device is designed to provide gain and linearity for RF applications, covering a frequency range typically around 0.1 GHz to 10 GHz, making it suitable for a wide range of communication systems.
Key functions include:
1. RF Input (Pin 1): The input for the RF signal.
2. Ground (Pins 2, 4, 6, and Exposed Pad): These pins are for grounding and should be connected to the RF and DC ground for proper operation.
3. RF Output/VD (Pin 3): This serves as both the RF output and the DC power supply input.
4. No Connect (Pin 5): This pin is not connected internally and can be grounded or left floating.
5. VBIAS (Pin 7): Provides the bias voltage for the amplifier.
6. VGG (Pin 8): Used for gate voltage control.
The device is designed to provide gain and linearity for RF applications, covering a frequency range typically around 0.1 GHz to 10 GHz, making it suitable for a wide range of communication systems.
Manufacturer
The HMC788ALP2ETR is manufactured by Analog Devices, Inc. Analog Devices is a multinational semiconductor company specializing in the design, manufacture, and marketing of a broad portfolio of solutions, including analog and digital signal processing technologies. The company serves a wide range of industries, including communications, automotive, industrial, and consumer electronics, providing components such as amplifiers, converters, and integrated circuits for various applications. Analog Devices is known for its innovation in high-performance analog technology and is regarded as a leader in the semiconductor industry.
Application
The HMC788ALP2ETR is a low-noise amplifier (LNA) commonly used in RF and microwave applications. Key application areas include:
1. Wireless Infrastructure: Enhancing signal clarity and strength in base stations and repeaters.
2. Satellite Communications: Improving sensitivity and performance in satellite transceivers.
3. Test Equipment: Used in RF test systems for accurate signal amplification.
4. Military and Aerospace: Supporting advanced communication systems with robust performance.
5. IoT Devices: Enabling efficient connectivity in low-power, wireless IoT networks.
These applications benefit from its low noise figure, high gain, and wide frequency range, making it suitable for enhancing signal reception and transmission quality.
1. Wireless Infrastructure: Enhancing signal clarity and strength in base stations and repeaters.
2. Satellite Communications: Improving sensitivity and performance in satellite transceivers.
3. Test Equipment: Used in RF test systems for accurate signal amplification.
4. Military and Aerospace: Supporting advanced communication systems with robust performance.
5. IoT Devices: Enabling efficient connectivity in low-power, wireless IoT networks.
These applications benefit from its low noise figure, high gain, and wide frequency range, making it suitable for enhancing signal reception and transmission quality.
Package
The HMC788ALP2ETR is a RF amplifier that comes in a 2x2 mm LFCSP (Lead Frame Chip Scale Package). It's designed for high frequency applications, providing a compact and efficient solution. This packaging type offers good thermal and electrical performance, suitable for integration into small form factor designs.
