圖片僅供參考
GP2S40J0000F
+物料清單PHOTOINTERRUPTER REFLEC 3MM PC
-
製造商夏普微電子
-
製造商部分 #GP2S40J0000F
-
有存貨3836
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Supplier | Sharp Microelectronics |
| Package / Case | Tube |
| Part Status | Obsolete |
| Sensing Distance | 0.138 (3.5mm) |
| Sensing Method | Reflective |
| Voltage - Collector Emitter Breakdown(Max) | 35 V |
| Current - Collector(Ic)(Max) | 20 mA |
| Current - DC Forward(If)(Max) | 50 mA |
| Output Type | Phototransistor |
| Response Time | 50µs, 50µs |
| Mounting Type | Through Hole |
概述
Description
GP2S40J0000F is a Sharp GP2S-series infrared remote-control receiver module. It contains an IR photodiode with preamp, a 38 kHz band-pass/demodulator, and a digital output that can be read by a microcontroller. It is designed to receive standard IR remote signals and convert them into a clean logic signal for decoding. Typical applications include consumer electronics (TVs, audio gear, remotes) and any device controlled by an IR remote. The part is offered in a compact package and generally operates from a 5 V supply; exact pinout, current draw, and timing depend on the specific variant. For precise electrical specs and wiring, refer to the official GP2S40J0000F datasheet.
Equivalent
GP2S40J0000F is a Sharp GP2S infrared distance sensor. There is no single public “equivalent” part number. Closest matches are other GP2S models with similar range/output, or distributor cross-references. To give exact replacements, share the datasheet specs (supply voltage/current, output type, sensing range, package) and I can propose precise equivalents or cross-references (e.g., Digi-Key/Mouser).
Pinout
Pin count: 4 pins.
Function: Sharp GP2S40J0000F is an infrared emitter/detector pair in one package (optical sensor). Two pins drive the IR LED (anode and cathode), and the remaining two pins are the IR detector (phototransistor) connections (collector and emitter). Used for proximity/reflective sensing; output typically requires appropriate biasing/readout.
Function: Sharp GP2S40J0000F is an infrared emitter/detector pair in one package (optical sensor). Two pins drive the IR LED (anode and cathode), and the remaining two pins are the IR detector (phototransistor) connections (collector and emitter). Used for proximity/reflective sensing; output typically requires appropriate biasing/readout.
Manufacturer
- Manufacturer: Sharp Corporation (Sharp Electronics).
- What kind of company: Japanese multinational electronics company that designs and manufactures consumer electronics and electronic components (including sensors); a global tech company.
- What kind of company: Japanese multinational electronics company that designs and manufactures consumer electronics and electronic components (including sensors); a global tech company.
Application
GP2S40J0000F is a Sharp GP2S diffuse-reflective photoelectric sensor with about 40 mm sensing distance. Typical application areas:
- Non-contact object presence/absence detection on conveyors and packaging lines
- Edge and position sensing in feeders, pick-and-place, and robotics
- Detection of labels, papers, films in printers and copiers
- Height/stack sensing in packaging automation
- Obstacle or proximity detection in compact automation robots and cells
- Non-contact object presence/absence detection on conveyors and packaging lines
- Edge and position sensing in feeders, pick-and-place, and robotics
- Detection of labels, papers, films in printers and copiers
- Height/stack sensing in packaging automation
- Obstacle or proximity detection in compact automation robots and cells
Package
GP2S40J0000F uses an 8-pin surface-mount SOP package (SOP-8).