圖片僅供參考
GD25Q64CS2GR
+物料清單-
製造商北京GigaDevice電晶體有限公司
-
製造商部分 #GD25Q64CS2GR
-
有存貨12916
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Manufacturer | GigaDevice Semicon Beijing |
| Package / Case | SOP-8 |
| Memory Size | 64Mbit |
| Operating Temperature | -40℃~+85℃ |
| Voltage - Supply | 2.7V~3.6V |
| Clock Frequency | 120MHz |
| Interface | SPI |
| Data Retention - TDR (Year) | 20 years |
| Page Programming Time (Tpp) | 600us |
概述
Description
- Interface: Standard SPI (Serial Peripheral Interface) with support for Dual/Quad I/O modes.
- Speed: Up to 104MHz clock frequency for fast read operations.
- Voltage: Operates at 2.7V–3.6V, suitable for embedded systems.
- Sector Architecture: Uniform 4KB sectors, with 64KB blocks for flexible erase operations.
- Endurance: 100,000 program/erase cycles and 20-year data retention.
- Security: Supports software/hardware write protection and a unique 64-bit serial number.
Commonly used in IoT, automotive, consumer electronics, and firmware storage, it offers high reliability and low power consumption.
For detailed specs, refer to the datasheet.
Equivalent
- Winbond W25Q64JV
- Macronix MX25L6406E
- Micron (Adesto) AT25SF641
- ISSI IS25LP064
- P25Q64H (XTX)
These chips offer similar 64Mb capacity, SPI interface, and comparable specs. Verify pinout, voltage, and timing for exact compatibility.
Pinout
- Pin Count: 8-pin (common packages: SOP8, WSON8, or USON8).
- Key Functions:
- SPI Interface: Supports Standard/Dual/Quad SPI modes (CLK, MOSI, MISO, WP#, HOLD#, CS#).
- Voltage Range: 2.7V–3.6V.
- Speed: Up to 104MHz clock rate.
- Features: Sector erase (4KB), block erase (32/64KB), full-chip erase, and software/hardware write protection.
Pins include CS# (chip select), CLK (clock), DI/IO0 (data input), DO/IO1 (data output), WP#/IO2 (write protect), HOLD#/IO3 (hold), VCC (power), and GND (ground).
Compact and widely used in embedded systems for firmware storage.
Application
1. Consumer Electronics – Smart TVs, set-top boxes, IoT devices.
2. Automotive – Infotainment, dashcams, ADAS (meets AEC-Q100 standards).
3. Industrial – PLCs, HMI, robotics (high reliability).
4. Networking – Routers, switches, 5G modules (fast boot-up).
5. Wearables & Smart Home – Fitness trackers, smart appliances.
Its high-speed SPI interface (up to 104MHz), low power consumption, and durability make it ideal for firmware storage and code execution in embedded systems.