圖片僅供參考
GD25LQ16C8IGR
+物料清單IC FLASH 16MBIT SPI/QUAD 8LGA
-
製造商GigaDevice電晶體(香港)有限公司
-
製造商部分 #GD25LQ16C8IGR
-
有存貨7034
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Part Status | Active |
| Digi Key Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 16Mbit |
| Memory Organization | 2M x 8 |
| Memory Interface | SPI - Quad I/O |
| Write Cycle Time - Word, Page | 50µs, 2.4ms |
| Voltage - Supply | 1.65V ~ 2.1V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA Exposed Pad |
| Supplier Device Package | 8-LGA |
| Base Product Number | GD25LQ16 |
| Clock Frequency | 104 MHz |
概述
Description
Key features include a fast read speed up to 104 MHz, support for multiple data output modes, and programmable options such as sector and bulk erase. The GD25LQ16C8IGR supports an extensive range of packaging options, making it adaptable for diverse designs. With its robust architecture, it is ideal for applications in automotive, consumer electronics, and industrial sectors where firmware updates and data retention are critical.
Overall, the GD25LQ16C8IGR is a versatile solution for applications needing reliable non-volatile memory with quick access times and low power consumption.
Equivalent
Features
1. Interface: Supports Quad-SPI (QSPI), SPI, and Dual I/O modes, enabling high-speed data transfer.
2. Speed: Offers fast read speeds up to 104 MHz in QSPI mode.
3. Voltage Range: Operates typically at 2.7V to 3.6V.
4. Memory Organization: Contains 256 sectors of 64KB each, with a 4KB sector erase capability.
5. Programming Efficiency: Supports page programming with a maximum page size of 256 bytes.
6. Endurance: Rated for over 100,000 program/erase cycles per sector.
7. Data Retention: Retains data for 20 years at 85°C.
8. Package Options: Available in different packages, including SOIC and WSON.
9. Applications: Ideal for embedded systems, industrial control, automotive, and consumer electronics.
This chip is designed for reliability and performance in a wide range of applications requiring non-volatile memory storage.
Pinout
Pin Functions:
1. 1 (CS) - Chip Select: Active low signal to enable chip.
2. 2 (DO) - Data Output: Serial data output line.
3. 3 (WP) - Write Protect: Active low signal for write protection.
4. 4 (VSS) - Ground: Reference voltage for the chip.
5. 5 (DI) - Data Input: Serial data input line.
6. 6 (CLK) - Clock: Serial clock input for timing.
7. 7 (VCC) - Power Supply: Positive power supply for operation.
8. 8 (HOLD) - Hold: Active low signal to pause the operation.
This chip supports multiple modes of operation, including single, dual, and quad SPI, and is suitable for various applications requiring non-volatile storage.