圖片僅供參考
FQP17P06
+物料清單POWER FIELD-EFFECT TRANSISTOR, 1
-
製造商飛兆電晶體公司
-
製造商部分 #FQP17P06
-
有存貨14081
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Supplier | Rochester Electronics, LLC |
| Package / Case | Bulk |
| Series | QFET® |
| Part Status | Active |
| FET Type | P-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 60 V |
| Current - Continuous Drain(Id) @ 25°C | 17A (Tc) |
| Drive Voltage(Max Rds On Min Rds On) | 10V |
| Rds On(Max) @ Id Vgs | 120mOhm @ 8.5A, 10V |
| Vgs(th)(Max) @ Id | 4V @ 250µA |
| Gate Charge(Qg)(Max) @ Vgs | 27 nC @ 10 V |
| Vgs(Max) | ±25V |
| Input Capacitance(Ciss)(Max) @ Vds | 900 pF @ 25 V |
| Power Dissipation (Max) | 79W (Tc) |
| Operating Temperature | -55°C ~ 175°C (TJ) |
| Mounting Type | Through Hole |
| Supplier Device Package | TO-220-3 |
概述
Description
"Introduction to FQP17P06" typically refers to an introductory document or overview related to a specific course, module, project, or technical standard labeled as FQP17P06. However, without specific context or additional details, it is challenging to provide an accurate summary.
If FQP17P06 is a course code at an educational institution, the introduction might outline the course objectives, key topics covered, prerequisites, learning outcomes, and assessment methods. Alternatively, if it is a project or product code, the introduction might describe its purpose, the main features or specifications, the problem it addresses, and its intended audience or market.
For precise information, consulting the relevant course syllabus, project documentation, or official sources would be necessary. This will provide detailed insights tailored to the specific context of FQP17P06.
If FQP17P06 is a course code at an educational institution, the introduction might outline the course objectives, key topics covered, prerequisites, learning outcomes, and assessment methods. Alternatively, if it is a project or product code, the introduction might describe its purpose, the main features or specifications, the problem it addresses, and its intended audience or market.
For precise information, consulting the relevant course syllabus, project documentation, or official sources would be necessary. This will provide detailed insights tailored to the specific context of FQP17P06.
Equivalent
The FQP17P06 is a P-channel MOSFET with specific characteristics. Equivalent products can include:
1. IRF9640
2. IRF9540
3. STP16PF06
4. FQP27P06
5. 2SJ201
These equivalents may vary slightly in parameters, so it's essential to verify specifications such as voltage, current, and package type to ensure compatibility with your application.
1. IRF9640
2. IRF9540
3. STP16PF06
4. FQP27P06
5. 2SJ201
These equivalents may vary slightly in parameters, so it's essential to verify specifications such as voltage, current, and package type to ensure compatibility with your application.
Features
The FQP17P06 is an N-channel MOSFET transistor commonly used in power management applications. Key features include:
1. Voltage and Current Ratings: It typically has a drain-source voltage (V_DS) of 60V and a continuous drain current (I_D) of 17A.
2. R_DS(on): The on-resistance is relatively low, often around 0.1 ohms, which helps in minimizing power loss during operation.
3. Package Type: The FQP17P06 is usually available in a TO-220 package, which provides good heat dissipation capabilities making it suitable for applications requiring efficient thermal management.
4. High Efficiency: Due to its low on-resistance and high current handling capability, it is suitable for high-efficiency power conversion applications.
5. Temperature Range: It operates within a broad temperature range, suitable for various environmental conditions.
6. Applications: Commonly employed in applications like DC-DC converters, motor control circuits, and other switching applications.
These features make the FQP17P06 a versatile and effective component for various electronic circuits requiring efficient power management.
1. Voltage and Current Ratings: It typically has a drain-source voltage (V_DS) of 60V and a continuous drain current (I_D) of 17A.
2. R_DS(on): The on-resistance is relatively low, often around 0.1 ohms, which helps in minimizing power loss during operation.
3. Package Type: The FQP17P06 is usually available in a TO-220 package, which provides good heat dissipation capabilities making it suitable for applications requiring efficient thermal management.
4. High Efficiency: Due to its low on-resistance and high current handling capability, it is suitable for high-efficiency power conversion applications.
5. Temperature Range: It operates within a broad temperature range, suitable for various environmental conditions.
6. Applications: Commonly employed in applications like DC-DC converters, motor control circuits, and other switching applications.
These features make the FQP17P06 a versatile and effective component for various electronic circuits requiring efficient power management.
Pinout
The FQP17P06 is a P-channel MOSFET with the following pin configuration and functions:
1. Pin Count: It has 3 pins.
2. Pin Functions:
- Gate (G): This pin is used to control the MOSFET's switching. Applying voltage here allows or prevents current flow between the drain and source.
- Drain (D): This is the pin through which the main current flows when the MOSFET is in the "on" state.
- Source (S): This pin is typically connected to ground or a reference voltage in the circuit.
The FQP17P06 is commonly used for switching applications and power management in electronic circuits, handling up to a specified voltage and current.
1. Pin Count: It has 3 pins.
2. Pin Functions:
- Gate (G): This pin is used to control the MOSFET's switching. Applying voltage here allows or prevents current flow between the drain and source.
- Drain (D): This is the pin through which the main current flows when the MOSFET is in the "on" state.
- Source (S): This pin is typically connected to ground or a reference voltage in the circuit.
The FQP17P06 is commonly used for switching applications and power management in electronic circuits, handling up to a specified voltage and current.
Manufacturer
The FQP17P06 is manufactured by ON Semiconductor. ON Semiconductor is a global company that specializes in the design and manufacturing of semiconductor components. It provides a wide range of products, including power and signal management, logic, discrete, and custom devices for a variety of applications. These applications span multiple sectors, including automotive, communications, computing, consumer electronics, and industrial markets. The company is known for its focus on energy-efficient innovations and solutions, aiming to improve energy usage and sustainability across various technologies.
Application
The FQP17P06 is a Power MOSFET often used in various power management applications due to its efficiency and performance characteristics. Its typical application areas include:
1. DC-DC Converters: Used in power conversion circuits for efficient voltage regulation.
2. Load Switches: Acts as a switch to control power delivery to different parts of a system.
3. Motor Drives: Controls the operation of motors in various electronic devices.
4. LED Drivers: Regulates power in LED lighting systems.
5. Battery Management Systems: Ensures efficient charging and discharging in battery-operated devices.
These applications benefit from the MOSFET’s low on-resistance and fast switching capabilities.
1. DC-DC Converters: Used in power conversion circuits for efficient voltage regulation.
2. Load Switches: Acts as a switch to control power delivery to different parts of a system.
3. Motor Drives: Controls the operation of motors in various electronic devices.
4. LED Drivers: Regulates power in LED lighting systems.
5. Battery Management Systems: Ensures efficient charging and discharging in battery-operated devices.
These applications benefit from the MOSFET’s low on-resistance and fast switching capabilities.
Package
The FQP17P06 is a P-channel MOSFET housed in a TO-220 package. This type of package is commonly used for power semiconductors, offering good heat dissipation and easy mounting for various electronic applications.
