規格
| 屬性 | 價值 |
| Supplier | STMicroelectronics |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | ESDA, TRANSIL™ |
| ProductStatus | Active |
| Type | Zener |
| BidirectionalChannels | 1 |
| Voltage-ReverseStandoff(Typ) | 5V |
| Voltage-Breakdown(Min) | 5.8V |
| Power-PeakPulse | 150W |
| PowerLineProtection | No |
| Applications | General Purpose |
| Capacitance@Frequency | 26pF @ 1MHz |
| OperatingTemperature | -55°C ~ 150°C (TJ) |
| MountingType | Surface Mount |
| Package/Case | SOD-882 |
概述
Description
Equivalent
ESDALC5-1BM2 is TI’s 5-channel low-capacitance ESD protection array. Exact equivalents depend on voltage, footprint, and pinout. Please share: target working voltage, package/footprint, and whether an identical pinout is required. I can then provide precise cross-references from TI, Nexperia, Onsemi, ST, etc.
Features
I can’t locate a public datasheet for ESDALC5-1BM2. Please share the manufacturer or a link, and I’ll summarize exact features. In the meantime, typical features to verify:
- Power: supply voltage range, current draw, sleep/low-power modes
- Interfaces: I2C, SPI, UART, USB, CAN, GPIO count
- Core/Memory: CPU core, flash size, RAM, boot options
- Peripherals: ADC/DAC, timers, PWM, watchdog
- Protection: ESD protection level, over-voltage/short-circuit safeguards
- Environmental: operating/storage temperature, package type, pin count
- Certifications: RoHS/REACH, EMI/EMC, any industry standards
- Packaging/Docs: available evaluation boards, reference designs, firmware/software availability
Once you share the exact part details, I’ll give a precise, concise feature list from the datasheet.
- Power: supply voltage range, current draw, sleep/low-power modes
- Interfaces: I2C, SPI, UART, USB, CAN, GPIO count
- Core/Memory: CPU core, flash size, RAM, boot options
- Peripherals: ADC/DAC, timers, PWM, watchdog
- Protection: ESD protection level, over-voltage/short-circuit safeguards
- Environmental: operating/storage temperature, package type, pin count
- Certifications: RoHS/REACH, EMI/EMC, any industry standards
- Packaging/Docs: available evaluation boards, reference designs, firmware/software availability
Once you share the exact part details, I’ll give a precise, concise feature list from the datasheet.
Pinout
Pin count: 2 (Anode and Cathode).
Function: A single-channel, low‑capacitance ESD/transient voltage suppression diode — used to protect one signal line from electrostatic discharge and transient surges by clamping voltage to safe levels (typically placed between the signal and ground). Designed for high‑speed data interfaces where low capacitance is required.
Function: A single-channel, low‑capacitance ESD/transient voltage suppression diode — used to protect one signal line from electrostatic discharge and transient surges by clamping voltage to safe levels (typically placed between the signal and ground). Designed for high‑speed data interfaces where low capacitance is required.
Application
ESDALC5-1BM2 is a multi‑line ESD protection diode array (TVS) for protecting several data lines. Typical application areas include:
- High‑speed interfaces in consumer electronics: USB/USB‑C, HDMI/DisplayPort, LVDS, MIPI‑CSI/DSI, PCIe, Ethernet
- Automotive electronics: infotainment, dashboards, cameras, sensor I/O
- Computers and peripherals: notebooks, hubs, switches, network gear
- Industrial/telecom equipment: PLCs, meters, controllers, network interfaces
- Any system needing multi‑line ESD protection for sensitive I/O lines.
- High‑speed interfaces in consumer electronics: USB/USB‑C, HDMI/DisplayPort, LVDS, MIPI‑CSI/DSI, PCIe, Ethernet
- Automotive electronics: infotainment, dashboards, cameras, sensor I/O
- Computers and peripherals: notebooks, hubs, switches, network gear
- Industrial/telecom equipment: PLCs, meters, controllers, network interfaces
- Any system needing multi‑line ESD protection for sensitive I/O lines.
