規格
| 屬性 | 價值 |
| Supplier | Rohm Semiconductor |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Transistor Type | NPN - Pre-Biased |
| Current - Collector(Ic)(Max) | 50 mA |
| Voltage - Collector Emitter Breakdown(Max) | 50 V |
| Resistor - Base(R1) | 10 kOhms |
| Resistor - Emitter Base(R2) | 10 kOhms |
| DC Current Gain(h FE)(Min) @ Ic Vce | 30 @ 5mA, 5V |
| Vce Saturation(Max) @ Ib Ic | 300mV @ 500µA, 10mA |
| Current - Collector Cutoff(Max) | 500nA |
| Frequency - Transition | 250 MHz |
| Power - Max | 150 mW |
| Mounting Type | Surface Mount |
概述
Description
DTC114EETL is a digital transistor (DTC) from ROHM’s DTC family. It’s an NPN transistor with a built‑in base current‑limiting resistor (and usually a base–emitter pull‑down), so a microcontroller can drive it directly without external bias resistors.
How it works: a logic high on the input allows base current to flow, turning the transistor on and sinking current through the load; a logic low turns it off. The device provides an open-collector style output suitable for interfacing to LEDs, small relays, or other loads.
Why use it: reduces BOM, simplifies designs, and improves noise immunity with a defined off-state even if the input floats.
Packaging: typically a small lead-free package variant (ETL indicates a specific RoHS variant).
Note: refer to the DTC114EETL datasheet for exact electrical specs (Vcc, Ic, hFE, input thresholds, safe operating area).
How it works: a logic high on the input allows base current to flow, turning the transistor on and sinking current through the load; a logic low turns it off. The device provides an open-collector style output suitable for interfacing to LEDs, small relays, or other loads.
Why use it: reduces BOM, simplifies designs, and improves noise immunity with a defined off-state even if the input floats.
Packaging: typically a small lead-free package variant (ETL indicates a specific RoHS variant).
Note: refer to the DTC114EETL datasheet for exact electrical specs (Vcc, Ic, hFE, input thresholds, safe operating area).
Features
DTC114EETL Features:
- NPN digital transistor with built-in base resistor (no external base resistor required)
- Optional internal base-emitter resistor for guaranteed OFF when input is floating
- Low input drive current; compatible with TTL/CMOS logic
- Maximum Ic around 50 mA; Vceo up to approximately 25 V
- Fast switching with low saturation voltage
- Small SOT-23-3 package; RoHS-compliant; Tape & Reel (ETL)
- Applications: LED/relay driving and logic-level interfacing
- NPN digital transistor with built-in base resistor (no external base resistor required)
- Optional internal base-emitter resistor for guaranteed OFF when input is floating
- Low input drive current; compatible with TTL/CMOS logic
- Maximum Ic around 50 mA; Vceo up to approximately 25 V
- Fast switching with low saturation voltage
- Small SOT-23-3 package; RoHS-compliant; Tape & Reel (ETL)
- Applications: LED/relay driving and logic-level interfacing
Pinout
- Pin count: 3 pins (SOT‑23 package).
- Function: DTC114EETL is a single NPN "digital transistor" with built‑in base bias resistor(s). It is used as a logic‑level switching transistor (input at base pin, collector to load, emitter to ground) for simple TTL/CMOS interfacing and signal switching; typical pinout: pin 1 = base, pin 2 = collector, pin 3 = emitter.
- Function: DTC114EETL is a single NPN "digital transistor" with built‑in base bias resistor(s). It is used as a logic‑level switching transistor (input at base pin, collector to load, emitter to ground) for simple TTL/CMOS interfacing and signal switching; typical pinout: pin 1 = base, pin 2 = collector, pin 3 = emitter.
Manufacturer
- Manufacturer: Toshiba Electronic Devices & Storage Corporation (formerly Toshiba).
- About the company: a Japanese multinational electronics company that designs and manufactures semiconductors, electronic components, and consumer electronics; one of the world’s largest electronics manufacturers.
- About the company: a Japanese multinational electronics company that designs and manufactures semiconductors, electronic components, and consumer electronics; one of the world’s largest electronics manufacturers.
Application
DTC114EETL is a digital transistor (NPN) with built-in base resistor. Applications include:
- Direct drive of LEDs and indicators from 3.3/5V logic
- Switching small relays, solenoids, or sensors with minimal external parts
- General-purpose NPN transistor switches in compact logic circuits
- Buffering/level-shifting between microcontrollers and higher-load circuits
- Control circuits in consumer electronics, appliances, and automotive applications
These use cases reduce parts count and simplify MCU interfacing while protecting outputs.
- Direct drive of LEDs and indicators from 3.3/5V logic
- Switching small relays, solenoids, or sensors with minimal external parts
- General-purpose NPN transistor switches in compact logic circuits
- Buffering/level-shifting between microcontrollers and higher-load circuits
- Control circuits in consumer electronics, appliances, and automotive applications
These use cases reduce parts count and simplify MCU interfacing while protecting outputs.
Package
DTC114EETL comes in a 3-pin SMD package: SOT‑23 (SC‑59) surface-mount package.
