規格
| 屬性 | 價值 |
| Supplier | Rectron USA |
| Package | Tape & Reel (TR) |
| ProductStatus | Active |
| Voltage-Zener(Nom)(Vz) | 6.2 V |
| Tolerance | ±5% |
| Power-Max | 350 mW |
| Impedance(Max)(Zzt) | 10 Ohms |
| Current-ReverseLeakage@Vr | 3 µA @ 4 V |
| Voltage-Forward(Vf)(Max)@If | 900 mV @ 10 mA |
| MountingType | Surface Mount |
| Package/Case | TO-236-3, SC-59, SOT-23-3 |
概述
Description
BZX84C6V2 is a small, surface‑mount Zener diode (BZX84C series) with a nominal Zener voltage of 6.2 V. Key points:
- Package: SOT-23, two active terminals (pins 1 and 3), pin 2 often NC (check datasheet).
- Voltage: Vz ≈ 6.2 V; tolerance ±5% (C-series).
- Power: 0.5 W maximum dissipation at room temperature (derate with ambient).
- Operation: reverse-biased to hold about 6.2 V across it; used as a voltage reference or regulator/clamp.
- Typical current: IZT ≈ 5 mA for rating; dynamic impedance specified at IZT.
- Applications: simple voltage reference, overvoltage protection, clamping, and low-power regulator circuits.
Polarity: cathode (banded end) is the higher-potential terminal in reverse operation.
- Package: SOT-23, two active terminals (pins 1 and 3), pin 2 often NC (check datasheet).
- Voltage: Vz ≈ 6.2 V; tolerance ±5% (C-series).
- Power: 0.5 W maximum dissipation at room temperature (derate with ambient).
- Operation: reverse-biased to hold about 6.2 V across it; used as a voltage reference or regulator/clamp.
- Typical current: IZT ≈ 5 mA for rating; dynamic impedance specified at IZT.
- Applications: simple voltage reference, overvoltage protection, clamping, and low-power regulator circuits.
Polarity: cathode (banded end) is the higher-potential terminal in reverse operation.
Equivalent
Equivalent parts for BZX84C6V2 (6.2 V, ~0.5 W Zener in SOT-23) include:
- BZX84C6V2 from other vendors (NXP, ON Semiconductor, ROHM, Vishay, Diodes Inc)
- BZT52C6V2 (SOD-123 package)
- BZV55-C6V2 (axial lead)
Note: packaging varies; check datasheets for exact pinout and power rating.
- BZX84C6V2 from other vendors (NXP, ON Semiconductor, ROHM, Vishay, Diodes Inc)
- BZT52C6V2 (SOD-123 package)
- BZV55-C6V2 (axial lead)
Note: packaging varies; check datasheets for exact pinout and power rating.
Features
- Zener diode from the BZX84 family for voltage regulation/reference
- Nominal Zener voltage: 6.2 V
- Power rating: 0.5 W maximum
- Package: small surface-mount device (SMD)
- Tolerance: ±5% (C variant)
- Wide operating/ storage temperature range: typically -65°C to +150°C
- Low dynamic impedance suitable for regulation and reference applications
- RoHS compliant and widely available
- Nominal Zener voltage: 6.2 V
- Power rating: 0.5 W maximum
- Package: small surface-mount device (SMD)
- Tolerance: ±5% (C variant)
- Wide operating/ storage temperature range: typically -65°C to +150°C
- Low dynamic impedance suitable for regulation and reference applications
- RoHS compliant and widely available
Pinout
BZX84C6V2 is a 6.2-volt Zener diode in an SOT-23 package. It is a 2-terminal device (anode and cathode) with three package pins: Pin 1 = Anode, Pin 2 = Not Connected, Pin 3 = Cathode. Used for voltage regulation/clamping around 6.2 V.
Manufacturer
There isn’t a single manufacturer. The BZX84C6V2 is produced by several companies, notably Vishay Intertechnology, Nexperia, Diodes Incorporated, ROHM, and ON Semiconductor.
Vishay (one common source) is a global manufacturer of discrete semiconductors and passive electronic components, designing and producing diodes, transistors, resistors, capacitors, inductors, and related devices.
Vishay (one common source) is a global manufacturer of discrete semiconductors and passive electronic components, designing and producing diodes, transistors, resistors, capacitors, inductors, and related devices.
Application
BZX84C6V2 is a 6.2V Zener diode (0.5W). Common applications:
- Simple shunt regulator to provide a ~6.2V reference in low‑current circuits
- Reference voltage for ADCs/comparators and other analog blocks
- Overvoltage/transient protection by clamping voltages on rails or I/O lines
- Spike suppression and input protection in lightweight consumer electronics and automotive interfaces
- Simple shunt regulator to provide a ~6.2V reference in low‑current circuits
- Reference voltage for ADCs/comparators and other analog blocks
- Overvoltage/transient protection by clamping voltages on rails or I/O lines
- Spike suppression and input protection in lightweight consumer electronics and automotive interfaces
Package
SOT-23 (3-pin) surface-mount package; a two-terminal Zener diode.
