圖片僅供參考
BZV55-C15
+物料清單DIODE ZENER 14.7V 400MW SOD80
-
製造商好方舟電晶體
-
製造商部分 #BZV55-C15
-
有存貨5897
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| PartStatus | Active |
| Voltage-Zener(Nom)(Vz) | 14.7 V |
| Tolerance | ±5% |
| Power-Max | 400 mW |
| Impedance(Max)(Zzt) | 30 Ohms |
| Current-ReverseLeakage@Vr | 50 nA @ 10 V |
| Voltage-Forward(Vf)(Max)@If | 900 mV @ 10 mA |
| OperatingTemperature | -65°C ~ 175°C (TJ) |
| MountingType | Surface Mount |
| Package/Case | DO-213AC, MINI-MELF, SOD-80 |
| SupplierDevicePackage | SOD-80 MiniMELF |
概述
Description
BZV55-C15 refers to a specific type of Zener diode, which is a semiconductor device that allows current to flow in the forward direction like a typical diode but also permits current to flow in the reverse direction when the voltage is above a certain level, known as the Zener breakdown voltage. This particular model, BZV55-C15, is designed to provide voltage regulation, serving as a voltage reference in circuits.
The "C15" typically indicates the Zener voltage rating of this diode, which is 15 volts. It's used in applications that require a stable reference voltage and is often utilized in power supply circuits to protect against overvoltage conditions or to ensure consistent voltage levels. The BZV55 series diodes are small, making them suitable for compact circuit designs. They’re commonly used in consumer electronics, communication devices, and other low-power applications. With its compact size and reliable performance, the BZV55-C15 Zener diode is an efficient choice for maintaining voltage stability in various electronic circuits.
The "C15" typically indicates the Zener voltage rating of this diode, which is 15 volts. It's used in applications that require a stable reference voltage and is often utilized in power supply circuits to protect against overvoltage conditions or to ensure consistent voltage levels. The BZV55 series diodes are small, making them suitable for compact circuit designs. They’re commonly used in consumer electronics, communication devices, and other low-power applications. With its compact size and reliable performance, the BZV55-C15 Zener diode is an efficient choice for maintaining voltage stability in various electronic circuits.
Equivalent
The BZV55-C15 is a Zener diode with a 15V nominal voltage. Equivalent products include:
1. 1N4744A
2. BZX55C15
3. 1N5252B
4. BZX84C15
These alternatives offer similar Zener voltage ratings and package types, though you should check specific datasheets to confirm electrical characteristics and compatibility for your application.
1. 1N4744A
2. BZX55C15
3. 1N5252B
4. BZX84C15
These alternatives offer similar Zener voltage ratings and package types, though you should check specific datasheets to confirm electrical characteristics and compatibility for your application.
Features
The BZV55-C15 is a Zener diode, which is a type of semiconductor device commonly used for voltage regulation in electronic circuits. Its key features include:
1. Nominal Zener Voltage: Approximately 15 volts, which stabilizes the voltage across the device at this level under specified conditions.
2. Power Dissipation: Typically rated for a power dissipation of around 500 mW, allowing it to handle moderate power loads.
3. Package Type: Generally comes in a DO-35 glass package, which is a small axial leaded form factor suitable for through-hole mounting.
4. Temperature Coefficient: Has a specified temperature coefficient that indicates the change in Zener voltage with temperature variations.
5. Tolerance: Zener voltage tolerance is often around ±5%, allowing for some variability in the voltage regulation.
6. Applications: Commonly used in voltage regulation, voltage reference, and protection circuits.
7. Reverse Current: Low reverse current leakage, which enhances efficiency in regulatory applications.
These features make the BZV55-C15 suitable for a variety of electronic applications where stable voltage output is critical.
1. Nominal Zener Voltage: Approximately 15 volts, which stabilizes the voltage across the device at this level under specified conditions.
2. Power Dissipation: Typically rated for a power dissipation of around 500 mW, allowing it to handle moderate power loads.
3. Package Type: Generally comes in a DO-35 glass package, which is a small axial leaded form factor suitable for through-hole mounting.
4. Temperature Coefficient: Has a specified temperature coefficient that indicates the change in Zener voltage with temperature variations.
5. Tolerance: Zener voltage tolerance is often around ±5%, allowing for some variability in the voltage regulation.
6. Applications: Commonly used in voltage regulation, voltage reference, and protection circuits.
7. Reverse Current: Low reverse current leakage, which enhances efficiency in regulatory applications.
These features make the BZV55-C15 suitable for a variety of electronic applications where stable voltage output is critical.
Pinout
The BZV55-C15 is a Zener diode, commonly used for voltage regulation applications. It is housed in a SOD-80 package, which typically has two pins. The two pins are the anode and the cathode. The primary function of this Zener diode is to maintain a stable reference voltage of approximately 15 volts across its terminals when reverse-biased, making it suitable for use in circuits requiring a regulated voltage.
Manufacturer
The BZV55-C15 is a Zener diode manufactured by Nexperia. Nexperia is a global semiconductor company that specializes in the production of discrete components, logic devices, and MOSFETs. Headquartered in Nijmegen, Netherlands, Nexperia was originally part of NXP Semiconductors and became an independent entity in 2017. The company is known for its focus on efficiency, offering products that are essential for power management and signal integrity in various electronic applications. Nexperia serves a wide range of industries, including automotive, industrial, computing, and consumer electronics.
Application
The BZV55-C15 is a Zener diode, commonly used for voltage regulation in electronic circuits. Its application areas include:
1. Voltage Regulation: Maintaining a stable output voltage despite variations in the input voltage or load conditions.
2. Overvoltage Protection: Protecting sensitive electronic components from voltage spikes by clamping excess voltage.
3. Signal Clipping: Limiting the amplitude of signals to prevent distortion or damage.
4. Reference Voltage: Providing a stable reference voltage in precision applications.
5. Switching Circuits: Used in switching applications to ensure proper turn-off characteristics.
These features make the BZV55-C15 suitable for use in consumer electronics, telecommunications, and industrial control systems.
1. Voltage Regulation: Maintaining a stable output voltage despite variations in the input voltage or load conditions.
2. Overvoltage Protection: Protecting sensitive electronic components from voltage spikes by clamping excess voltage.
3. Signal Clipping: Limiting the amplitude of signals to prevent distortion or damage.
4. Reference Voltage: Providing a stable reference voltage in precision applications.
5. Switching Circuits: Used in switching applications to ensure proper turn-off characteristics.
These features make the BZV55-C15 suitable for use in consumer electronics, telecommunications, and industrial control systems.
Package
The BZV55-C15 is a Zener diode, and it typically comes in a DO-35 package. This is a small, axial-lead glass package commonly used for diodes.
