規格
| 屬性 | 價值 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Switch Type | General Purpose |
| Number of Outputs | 2 |
| Ratio - Input: Output | 1:1 |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Voltage - Supply (Vcc/Vdd) | 6V ~ 28V |
| Current - Output (Max) | 21A |
| Rds On (Typ) | 45mOhm |
| Input Type | CMOS |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Operating Temperature | -40°C ~ 150°C |
| Mounting Type | Surface Mount |
| Supplier Device Package | 16-HSSOP-C |
概述
Description
BV2HD045EFU-CE2 is a power semiconductor device, typically a two-channel switching element in one package (likely a dual MOSFET or IGBT). It’s intended for fast switching in power electronics such as motor drives, inverters, and DC-DC converters, offering two transistors in a compact package for higher efficiency. The CE2 suffix denotes a specific packaging/lead-frame variant. Exact electrical specs (voltage, current, on-resistance or saturation, switching speeds) and footprint depend on the manufacturer. For definitive details, consult the official datasheet from the manufacturer or a trusted distributor using the full part number.
Pinout
- Pin count: 8 pins (8-pin package, e.g., SOP-8/DFN-8)
- Function: Dual high-side load switch (45 V rating) with two independent channels (each with its own input/control and output) and common power/ground pins; used to switch two DC loads in automotive/electrical applications with built-in protection.
- Function: Dual high-side load switch (45 V rating) with two independent channels (each with its own input/control and output) and common power/ground pins; used to switch two DC loads in automotive/electrical applications with built-in protection.
Manufacturer
Would you like me to look this up online? I can identify the manufacturer of BV2HD045EFU-CE2 and briefly describe the company.
Application
I don’t have real-time access to the exact datasheet, but BV2HD045EFU-CE2 is a power rectifier/diode device. Typical application areas include:
- Switch‑mode power supplies (AC–DC rectification)
- DC–DC converters and point‑of‑load regulation
- Inverters and motor drives
- Solar/inverter charge controllers and battery charging
- Uninterruptible power supplies (UPS) and telecom power equipment
- Automotive power electronics
- Industrial power rectification and welding equipment
Note: exact use depends on the device’s voltage/current ratings, package, and reverse-recovery specs.
- Switch‑mode power supplies (AC–DC rectification)
- DC–DC converters and point‑of‑load regulation
- Inverters and motor drives
- Solar/inverter charge controllers and battery charging
- Uninterruptible power supplies (UPS) and telecom power equipment
- Automotive power electronics
- Industrial power rectification and welding equipment
Note: exact use depends on the device’s voltage/current ratings, package, and reverse-recovery specs.
Package
D²PAK (TO-263) surface-mount package.
