圖片僅供參考
BLM15HD182SN1D
+物料清單FERRITE BEAD 1.8 KOHM 0402 1LN
-
製造商村田電子
-
製造商部分 #BLM15HD182SN1D
-
有存貨21572
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Series | EMIFIL®, BLM15 |
| PartStatus | Active |
| FilterType | Signal Line |
| NumberofLines | 1 |
| Impedance@Frequency | 1.8 kOhms @ 100 MHz |
| CurrentRating(Max) | 200mA |
| DCResistance(DCR)(Max) | 2.2Ohm |
| OperatingTemperature | -55°C ~ 125°C |
| Package/Case | 0402 (1005 Metric) |
| MountingType | Surface Mount |
| Height(Max) | 0.022" (0.55mm) |
| Size/Dimension | 0.039" L x 0.022" W (1.00mm x 0.55mm) |
| BaseProductNumber | BLM15HD |
概述
Description
The BLM15HD182SN1D is a chip ferrite bead manufactured by Murata, designed for suppressing high-frequency noise in electronic circuits. It belongs to Murata's BLM15H series, which are ideal for minimizing electromagnetic interference (EMI) and radio-frequency interference (RFI) in compact, high-density applications. This particular model features a nominal impedance of 1800 ohms at 100 MHz, making it effective for broadband noise suppression.
Key characteristics include a small 0402 package size, facilitating its use in space-constrained designs like smartphones, tablets, and other portable electronics. It can handle a maximum current of 200 mA, making it suitable for low-power applications. The bead is constructed using a ferrite material that helps in filtering high-frequency components while allowing low-frequency signals to pass through with minimal attenuation.
Overall, the BLM15HD182SN1D is an efficient solution for designers seeking to improve the electromagnetic compatibility (EMC) performance of their devices without compromising on size and power handling.
Key characteristics include a small 0402 package size, facilitating its use in space-constrained designs like smartphones, tablets, and other portable electronics. It can handle a maximum current of 200 mA, making it suitable for low-power applications. The bead is constructed using a ferrite material that helps in filtering high-frequency components while allowing low-frequency signals to pass through with minimal attenuation.
Overall, the BLM15HD182SN1D is an efficient solution for designers seeking to improve the electromagnetic compatibility (EMC) performance of their devices without compromising on size and power handling.
Equivalent
The BLM15HD182SN1D is a chip bead from Murata, specifically designed for EMI suppression. Equivalent products from other manufacturers include:
1. TDK's MPZ1608S181A
2. Taiyo Yuden's BK1608HM182-T
3. Laird's SMD 1812 Bead
4. Vishay's ILB-1812
These components have similar electrical characteristics and are used for similar EMI suppression applications in electronic circuits. Always verify specifications to ensure compatibility with your specific requirements.
1. TDK's MPZ1608S181A
2. Taiyo Yuden's BK1608HM182-T
3. Laird's SMD 1812 Bead
4. Vishay's ILB-1812
These components have similar electrical characteristics and are used for similar EMI suppression applications in electronic circuits. Always verify specifications to ensure compatibility with your specific requirements.
Features
The BLM15HD182SN1D is a chip bead ferrite manufactured by Murata, designed for EMI suppression in electronic circuits. Here are its key features:
1. Impedance: Offers an impedance of 1800 ohms at 100 MHz, providing effective noise suppression for high-frequency signals.
2. Size: It has a compact 0402 (1005 metric) package, making it suitable for densely populated circuit boards.
3. Rated Current: Can handle a current of up to 300 mA, making it suitable for various applications without overheating.
4. DC Resistance: Exhibits a low DC resistance of 0.50 ohms, minimizing power loss.
5. Frequency Range: Effective in the MHz range, ideal for controlling electromagnetic interference in RF circuits.
6. Application: Commonly used in mobile devices, computers, and other electronic equipment to enhance signal integrity and reduce noise.
7. Temperature Range: Operates efficiently within a temperature range of -55°C to +125°C, ensuring reliability in various environments.
Overall, the BLM15HD182SN1D is a compact, efficient solution for EMI suppression in high-frequency applications.
1. Impedance: Offers an impedance of 1800 ohms at 100 MHz, providing effective noise suppression for high-frequency signals.
2. Size: It has a compact 0402 (1005 metric) package, making it suitable for densely populated circuit boards.
3. Rated Current: Can handle a current of up to 300 mA, making it suitable for various applications without overheating.
4. DC Resistance: Exhibits a low DC resistance of 0.50 ohms, minimizing power loss.
5. Frequency Range: Effective in the MHz range, ideal for controlling electromagnetic interference in RF circuits.
6. Application: Commonly used in mobile devices, computers, and other electronic equipment to enhance signal integrity and reduce noise.
7. Temperature Range: Operates efficiently within a temperature range of -55°C to +125°C, ensuring reliability in various environments.
Overall, the BLM15HD182SN1D is a compact, efficient solution for EMI suppression in high-frequency applications.
Pinout
The BLM15HD182SN1D is a chip ferrite bead manufactured by Murata. It is designed to suppress high-frequency noise in electronic circuits. This component is not a typical integrated circuit with pins; instead, it is a surface-mount device with two terminals. These terminals are used to connect the ferrite bead in series with a signal or power line on a printed circuit board (PCB).
The primary function of the BLM15HD182SN1D is to reduce electromagnetic interference (EMI) by providing impedance at high frequencies. This helps to filter out noise and prevent it from affecting other components in the circuit. The specific part number, BLM15HD182SN1D, indicates certain characteristics, such as its impedance value, size, and packaging type, making it suitable for specific applications in electronic devices.
The primary function of the BLM15HD182SN1D is to reduce electromagnetic interference (EMI) by providing impedance at high frequencies. This helps to filter out noise and prevent it from affecting other components in the circuit. The specific part number, BLM15HD182SN1D, indicates certain characteristics, such as its impedance value, size, and packaging type, making it suitable for specific applications in electronic devices.
Manufacturer
The BLM15HD182SN1D is manufactured by Murata Manufacturing Co., Ltd. Murata is a Japanese company that specializes in the design, production, and supply of electronic components, modules, and devices. It is known for its innovation in the field of electronic components and provides a wide range of products including capacitors, resistors, inductors, sensors, and more. Murata is a global leader in electronics, serving industries such as telecommunications, automotive, healthcare, and consumer electronics.
Application
The BLM15HD182SN1D is a ferrite bead used for electromagnetic interference (EMI) suppression in electronic circuits. Its primary application areas include:
1. Consumer Electronics: Reducing noise in smartphones, tablets, and laptops.
2. Automotive Electronics: Ensuring stable performance of infotainment and electronic control units by minimizing EMI.
3. Industrial Equipment: Maintaining signal integrity in machinery and control systems.
4. Telecommunications: Enhancing the performance of networking devices by filtering high-frequency noise.
5. Medical Devices: Providing reliable operation in devices like monitors by reducing electromagnetic interference.
Its compact size makes it ideal for high-density mounting on printed circuit boards (PCBs).
1. Consumer Electronics: Reducing noise in smartphones, tablets, and laptops.
2. Automotive Electronics: Ensuring stable performance of infotainment and electronic control units by minimizing EMI.
3. Industrial Equipment: Maintaining signal integrity in machinery and control systems.
4. Telecommunications: Enhancing the performance of networking devices by filtering high-frequency noise.
5. Medical Devices: Providing reliable operation in devices like monitors by reducing electromagnetic interference.
Its compact size makes it ideal for high-density mounting on printed circuit boards (PCBs).
Package
The BLM15HD182SN1D is a chip-type ferrite bead from Murata, designed for EMI suppression. It comes in a compact 0402 package, which measures approximately 1.0 mm x 0.5 mm. This component is suitable for high-density mounting on PCBs.
