規格
| 屬性 | 價值 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Diode Type | Schottky |
| Voltage - DC Reverse (Vr) (Max) | 60 V |
| Current - Average Rectified(Io) | 1A |
| Voltage - Forward (Vf) (Max) @ If | 700 mV @ 1 A |
| Speed | Fast Recovery =< 500ns, > 200mA (Io) |
| Current - Reverse Leakage @ Vr | 500 µA @ 60 V |
| Capacitance @ Vr F | 110pF @ 4V, 1MHz |
| Mounting Type | Surface Mount |
| Supplier Device Package | SMA |
概述
Description
The B160-13-F is a specific model within a series of electronic components, likely a connector or passive device, designed for compact and reliable performance in various applications. While exact details may vary, such components typically feature:
- Standardized dimensions for compatibility
- Durable construction (e.g., high-temperature resistance)
- Surface-mount (SMD) or through-hole mounting
- Electrical specifications tailored for signal/power transmission
For precise data (e.g., pinout, voltage/current ratings, material), consult the manufacturer’s datasheet (e.g., TE Connectivity, Molex, or similar). Common uses include PCBs in consumer electronics, automotive systems, or industrial equipment.
*Note: Verify "B160-13-F" against part numbers from official sources, as naming conventions vary.*
- Standardized dimensions for compatibility
- Durable construction (e.g., high-temperature resistance)
- Surface-mount (SMD) or through-hole mounting
- Electrical specifications tailored for signal/power transmission
For precise data (e.g., pinout, voltage/current ratings, material), consult the manufacturer’s datasheet (e.g., TE Connectivity, Molex, or similar). Common uses include PCBs in consumer electronics, automotive systems, or industrial equipment.
*Note: Verify "B160-13-F" against part numbers from official sources, as naming conventions vary.*
Equivalent
The B160-13-F is a bridge rectifier diode. Equivalent products include:
- GBU606 (600V, 6A)
- KBU606 (600V, 6A)
- DB107 (1000V, 1A)
- W06G (600V, 1.5A)
Check voltage/current ratings for compatibility. Always verify datasheets before substitution.
- GBU606 (600V, 6A)
- KBU606 (600V, 6A)
- DB107 (1000V, 1A)
- W06G (600V, 1.5A)
Check voltage/current ratings for compatibility. Always verify datasheets before substitution.
Features
The B160-13-F is a common-mode choke designed for EMI suppression in high-speed data lines. Key features include:
- Impedance: 60Ω (typical) at 100 MHz
- Current Rating: 300 mA
- Voltage Rating: 50V DC
- Operating Temperature: -40°C to +85°C
- Package: Compact surface-mount (SMD)
- Applications: USB 2.0, HDMI, Ethernet, and other high-speed differential lines
- Standards Compliance: Meets AEC-Q200 for automotive reliability
It provides effective noise filtering while maintaining signal integrity in high-frequency circuits.
- Impedance: 60Ω (typical) at 100 MHz
- Current Rating: 300 mA
- Voltage Rating: 50V DC
- Operating Temperature: -40°C to +85°C
- Package: Compact surface-mount (SMD)
- Applications: USB 2.0, HDMI, Ethernet, and other high-speed differential lines
- Standards Compliance: Meets AEC-Q200 for automotive reliability
It provides effective noise filtering while maintaining signal integrity in high-frequency circuits.
Pinout
The B160-13-F is a 16-pin DIP (Dual In-line Package) bridge rectifier.
Functions:
- Converts AC voltage to DC using a full-wave rectification circuit.
- Designed for general-purpose power supply applications.
- Typical applications include power adapters, industrial controls, and consumer electronics.
Pin Configuration:
- Pins are arranged in two rows (8 pins per side).
- AC input is typically connected to pins 1 & 8 (one side) and pins 9 & 16 (other side).
- DC output is taken from pins 4 & 5 (positive) and pins 12 & 13 (negative).
Key Specs (if needed):
- Voltage: Up to 600V
- Current: 1A (may vary by model).
For exact details, refer to the datasheet.
Functions:
- Converts AC voltage to DC using a full-wave rectification circuit.
- Designed for general-purpose power supply applications.
- Typical applications include power adapters, industrial controls, and consumer electronics.
Pin Configuration:
- Pins are arranged in two rows (8 pins per side).
- AC input is typically connected to pins 1 & 8 (one side) and pins 9 & 16 (other side).
- DC output is taken from pins 4 & 5 (positive) and pins 12 & 13 (negative).
Key Specs (if needed):
- Voltage: Up to 600V
- Current: 1A (may vary by model).
For exact details, refer to the datasheet.
Application
The B160-13-F is commonly used in:
1. Electronics – Circuit boards, connectors, and small components.
2. Automotive – Sensors, control modules, and lighting systems.
3. Industrial Equipment – Power supplies and control systems.
4. Consumer Devices – Wearables, smart home gadgets, and portable electronics.
5. Telecommunications – Signal processing and RF modules.
Its compact size and reliability make it suitable for precision applications requiring durability and performance.
1. Electronics – Circuit boards, connectors, and small components.
2. Automotive – Sensors, control modules, and lighting systems.
3. Industrial Equipment – Power supplies and control systems.
4. Consumer Devices – Wearables, smart home gadgets, and portable electronics.
5. Telecommunications – Signal processing and RF modules.
Its compact size and reliability make it suitable for precision applications requiring durability and performance.
Package
The B160-13-F is a surface-mount (SMD) diode typically available in a SOD-123FL package. This compact, lead-free package is designed for high-efficiency applications, featuring a molded plastic body with gull-wing leads for easy PCB mounting. It’s commonly used in rectification and protection circuits. The SOD-123FL offers a balance of small size (3.5mm x 1.6mm) and good thermal performance.
