圖片僅供參考
B0322J5050AHF
+物料清單BALUN 300MHZ-2.2GHZ 50/50 0805
-
製造商TTM科技，股份有限公司。
-
製造商部分 #B0322J5050AHF
-
有存貨7138
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Supplier | TTM Technologies, Inc. |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | Xinger® |
| ProductStatus | Active |
| FrequencyRange | 300MHz ~ 2.2GHz |
| Impedance-Unbalanced/Balanced | 50 / 50Ohm |
| PhaseDifference | 17° |
| InsertionLoss(Max) | 1.6dB |
| ReturnLoss(Min) | 12.2dB |
| Package/Case | 0805 (2012 Metric) |
概述
Description
B0322J5050AHF is an SMD passive component, typically a ferrite bead/EMI filter or small inductor, in a 3225-size package (about 3.2 × 2.5 mm). It’s used to suppress high‑frequency noise on power or data lines and to shape impedance.
Notes:
- The markings (J, 5050, AHF) usually relate to tolerance (J = ±5%), impedance/assembly codes, and RoHS/lead‑free status, but exact meanings depend on the manufacturer.
- For a precise intro, locate the exact datasheet from the vendor by searching the full PN. Key specs to check: impedance (Ω) at a reference frequency (often 100 MHz), Irms current rating, voltage rating, package footprint, and environmental/reliability ratings.
If you provide the manufacturer or a link, I can give a tailored, exact description and typical applications.
Notes:
- The markings (J, 5050, AHF) usually relate to tolerance (J = ±5%), impedance/assembly codes, and RoHS/lead‑free status, but exact meanings depend on the manufacturer.
- For a precise intro, locate the exact datasheet from the vendor by searching the full PN. Key specs to check: impedance (Ω) at a reference frequency (often 100 MHz), Irms current rating, voltage rating, package footprint, and environmental/reliability ratings.
If you provide the manufacturer or a link, I can give a tailored, exact description and typical applications.
Features
Likely a surface‑mount tantalum capacitor (AHF series). Features:
- Capacitance: 50 µF
- Voltage rating: 50 V
- Tolerance: J (±5%)
- Case/size: 0322 (approx. 3.2 × 2.2 mm)
- Type: Solid tantalum, epoxy-coated
- ESR: Low, with good ripple handling
- Temp range: roughly -55 °C to +125 °C
- Mounting: Reflow‑solderable, RoHS compliant
- Polarity: Marked (requires correct orientation)
- Applications: Decoupling and energy storage on compact, high‑density boards
- Capacitance: 50 µF
- Voltage rating: 50 V
- Tolerance: J (±5%)
- Case/size: 0322 (approx. 3.2 × 2.2 mm)
- Type: Solid tantalum, epoxy-coated
- ESR: Low, with good ripple handling
- Temp range: roughly -55 °C to +125 °C
- Mounting: Reflow‑solderable, RoHS compliant
- Polarity: Marked (requires correct orientation)
- Applications: Decoupling and energy storage on compact, high‑density boards
Pinout
- Pin count: 2 pins
- Function: SMD power inductor (3.2×2.2 mm) with about 50 µH inductance (5050), used for energy storage/filtering in switching regulators.
- Function: SMD power inductor (3.2×2.2 mm) with about 50 µH inductance (5050), used for energy storage/filtering in switching regulators.
Manufacturer
- Manufacturer: AVX Corporation (now Kyocera AVX).
- Company type: A global manufacturer of electronic components, especially passive components such as tantalum/ceramic capacitors, resistors, and varistors.
- Company type: A global manufacturer of electronic components, especially passive components such as tantalum/ceramic capacitors, resistors, and varistors.
Application
Likely a ceramic MLCC capacitor (B0322J5050AHF). Typical applications:
- Decoupling/by-pass near ICs
- Filtering in power supplies and DC-DC converters
- Timing/smoothing networks in analog/digital circuits
- EMI/RFI suppression in telecom and consumer electronics
- Automotive and industrial electronics (50 V rating)
Note: confirm with the manufacturer’s datasheet for exact spec and recommended use.
- Decoupling/by-pass near ICs
- Filtering in power supplies and DC-DC converters
- Timing/smoothing networks in analog/digital circuits
- EMI/RFI suppression in telecom and consumer electronics
- Automotive and industrial electronics (50 V rating)
Note: confirm with the manufacturer’s datasheet for exact spec and recommended use.
Package
SMD ceramic chip capacitor in a 3225 (3.2 × 2.5 mm) package.
