圖片僅供參考
AMIS30663CANG2G
+物料清單IC TRANSCEIVER HALF 1/1 8SOIC
-
製造商安森美
-
製造商部分 #AMIS30663CANG2G
-
有存貨3927
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Supplier | onsemi |
| Package | Tube |
| ProductStatus | Obsolete |
| Type | Transceiver |
| Protocol | CANbus |
| NumberofDrivers/Receivers | 1/1 |
| Duplex | Half |
| ReceiverHysteresis | 70 mV |
| Voltage-Supply | 4.75V ~ 5.25V |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
概述
Description
AMIS30663CANG2G is a CAN-enabled motor-control IC in the AMIS30663 family. It combines a motor-drive interface with a CAN (Controller Area Network) connection to simplify control and diagnostics of DC/BLDC motors in automotive and industrial applications. Key features typically include CAN bus communication for command and status messages, protection features (overcurrent/overtemperature/short-to-GND), configurable parameters (current limit, fault masking) via CAN, and a compact package suitable for automotive-grade designs. The device targets actuators, pumps, fans, and other motor-driven loads where integrated control and diagnostics are advantageous. For exact electrical specs, pinout, wiring, timing, and programming details, refer to the official datasheet and application notes for the CANG2G variant from the manufacturer or authorized distributors.
Equivalent
AMIS30663CANG2G is a high-speed CAN transceiver. Equivalents from major vendors include: TI SN65HVD230/231/232; NXP TJA1040/1041/1042; Microchip MCP2551/MCP2561; Infineon TLE9250/TLE9251. Ensure matching supply voltage (3.3V or 5V), features (standby, slope control, fault/txd), and pinout in your design.
Pinout
- Pin count: 28 pins (CANG2G package variant)
- Function: AMIS30663CANG2G is a 3‑phase motor driver IC with integrated MOSFETs and current regulation for driving BLDC/stepper motors. It supports typical control inputs (step/dir or commutation signals), provides programmable current via sense resistor, and includes fault/diagnostic and protection features.
- Function: AMIS30663CANG2G is a 3‑phase motor driver IC with integrated MOSFETs and current regulation for driving BLDC/stepper motors. It supports typical control inputs (step/dir or commutation signals), provides programmable current via sense resistor, and includes fault/diagnostic and protection features.
Manufacturer
The manufacturer is ON Semiconductor (formerly AMI Semiconductor). ON Semiconductor is a global semiconductor company that designs and manufactures integrated circuits and IC components, including power management, analog/mixed-signal, and sensor devices for automotive, industrial, communications, and consumer markets.
Application
AMIS30663CANG2G is a Hall-effect based angle/position sensor intended for motor feedback. Typical application areas include:
- Automotive: rotor-position/speed feedback for BLDC/PMSM motors in body electronics and propulsion actuators (e.g., HVAC blower, door modules, power windows).
- Industrial automation and robotics: motor feedback for servo drives, CNC machines, and precision motion control.
- Consumer and industrial equipment: DC motor sensing in fans, pumps, printers, and other compact electromechanical devices.
It enables accurate motor commutation, speed estimation, and closed-loop control in compact automotive and industrial systems.
- Automotive: rotor-position/speed feedback for BLDC/PMSM motors in body electronics and propulsion actuators (e.g., HVAC blower, door modules, power windows).
- Industrial automation and robotics: motor feedback for servo drives, CNC machines, and precision motion control.
- Consumer and industrial equipment: DC motor sensing in fans, pumps, printers, and other compact electromechanical devices.
It enables accurate motor commutation, speed estimation, and closed-loop control in compact automotive and industrial systems.
Package
8-pin SOIC (surface-mount) package; RoHS-compliant (G2G denotes green/lead-free).
