規格
| 屬性 | 價值 |
| Package / Case | Tube |
| Part Status | Active |
| Type | Receiver |
| Protocol | RS422, RS485 |
| Number of Drivers/Receivers | 0/4 |
| Receiver Hysteresis | 50 mV |
| Voltage - Supply | 3V ~ 3.6V |
| Operating Temperature | 0°C ~ 70°C |
| Mounting Type | Surface Mount |
概述
Description
The AM26LV32CD is a quad differential line receiver from Texas Instruments, designed for applications requiring high-speed and low-power consumption. It operates over a wide range of supply voltages and features a low-power standby mode. The device can receive digital data over balanced lines and is compatible with RS-422, RS-423, and RS-485 standards. It has a high input impedance and differential inputs that provide noise immunity, making it suitable for data transmission over long distances.
Key features include:
- Low power consumption due to CMOS technology.
- Wide supply voltage range from 3.3V to 5V.
- High-speed operation, supporting data rates up to 32 Mbps.
- High input impedance and differential inputs for enhanced noise rejection.
- Tri-state outputs for bus-oriented applications.
The AM26LV32CD is available in various package options, including surface-mount, making it versatile for different design requirements. It is commonly used in telecommunications, industrial control, and computer peripheral applications. Its robustness and efficiency make it a reliable choice for high-speed data communication systems.
Key features include:
- Low power consumption due to CMOS technology.
- Wide supply voltage range from 3.3V to 5V.
- High-speed operation, supporting data rates up to 32 Mbps.
- High input impedance and differential inputs for enhanced noise rejection.
- Tri-state outputs for bus-oriented applications.
The AM26LV32CD is available in various package options, including surface-mount, making it versatile for different design requirements. It is commonly used in telecommunications, industrial control, and computer peripheral applications. Its robustness and efficiency make it a reliable choice for high-speed data communication systems.
Equivalent
The AM26LV32CD is a low-voltage differential receiver used in RS-422 and RS-485 communication systems. Equivalent products include:
1. Texas Instruments SN65LVDS32
2. Maxim Integrated MAX3095
3. ON Semiconductor MC3486
4. STMicroelectronics ST485
These alternatives offer similar functionality and compatibility, supporting differential signaling and multiple receivers, suitable for similar applications in communication systems. Always check the specific datasheets for compatibility in your application.
1. Texas Instruments SN65LVDS32
2. Maxim Integrated MAX3095
3. ON Semiconductor MC3486
4. STMicroelectronics ST485
These alternatives offer similar functionality and compatibility, supporting differential signaling and multiple receivers, suitable for similar applications in communication systems. Always check the specific datasheets for compatibility in your application.
Features
The AM26LV32CD is a quadruple differential line receiver with the following features:
1. Low Power Consumption: Designed with low-power CMOS technology, which enhances efficiency.
2. High-Speed Operation: Capable of operating at high data rates suitable for fast communications.
3. Wide Supply Voltage Range: Operates across a wide voltage range, typically from 3V to 3.6V.
4. Differential Inputs: Features four independent differential input pairs, ideal for balanced signal transmission.
5. Noise Immunity: Provides superior noise immunity due to the differential input design.
6. Tri-State Outputs: Includes tri-state outputs that facilitate easy bus interfacing and signal isolation.
7. Short-Circuit Protection: Integrated protection mechanisms to safeguard against short circuits.
8. Temperature Range: Designed to function reliably over a wide temperature range, catering to various environmental conditions.
9. Compact Package: Available in a compact SOIC package for space-efficient board design.
These features make it well-suited for applications requiring reliable high-speed data transmission and efficient power usage.
1. Low Power Consumption: Designed with low-power CMOS technology, which enhances efficiency.
2. High-Speed Operation: Capable of operating at high data rates suitable for fast communications.
3. Wide Supply Voltage Range: Operates across a wide voltage range, typically from 3V to 3.6V.
4. Differential Inputs: Features four independent differential input pairs, ideal for balanced signal transmission.
5. Noise Immunity: Provides superior noise immunity due to the differential input design.
6. Tri-State Outputs: Includes tri-state outputs that facilitate easy bus interfacing and signal isolation.
7. Short-Circuit Protection: Integrated protection mechanisms to safeguard against short circuits.
8. Temperature Range: Designed to function reliably over a wide temperature range, catering to various environmental conditions.
9. Compact Package: Available in a compact SOIC package for space-efficient board design.
These features make it well-suited for applications requiring reliable high-speed data transmission and efficient power usage.
Pinout
The AM26LV32CD is a quadruple differential line receiver IC. It has 16 pins in a standard SOIC-16 package. Here is a brief overview of its pin functions:
1. Pins 1, 4, 7, 10 (A, B, C, D): Non-inverting inputs for each differential pair.
2. Pins 2, 5, 8, 11 (Y): Inverting inputs for each differential pair.
3. Pins 3, 6, 9, 12 (Z): Outputs for each differential pair.
4. Pin 13 (GND): Ground connection.
5. Pin 14 (VCC): Supply voltage.
6. Pins 15, 16 (NC): No connect pins or used for additional features depending on the specific variant.
The AM26LV32CD is designed to receive differential signals and provide logic-level outputs, with features like high speed and low power consumption, and is commonly used in digital data communication systems.
1. Pins 1, 4, 7, 10 (A, B, C, D): Non-inverting inputs for each differential pair.
2. Pins 2, 5, 8, 11 (Y): Inverting inputs for each differential pair.
3. Pins 3, 6, 9, 12 (Z): Outputs for each differential pair.
4. Pin 13 (GND): Ground connection.
5. Pin 14 (VCC): Supply voltage.
6. Pins 15, 16 (NC): No connect pins or used for additional features depending on the specific variant.
The AM26LV32CD is designed to receive differential signals and provide logic-level outputs, with features like high speed and low power consumption, and is commonly used in digital data communication systems.
Manufacturer
The AM26LV32CD is manufactured by Texas Instruments (TI). Texas Instruments is an American technology company that designs and manufactures semiconductors and various integrated circuits. It is one of the largest semiconductor companies in the world and is primarily known for its development of analog chips and embedded processors, which are used in a wide range of electronic devices and applications. TI serves numerous industries, including automotive, industrial, personal electronics, communications equipment, and enterprise systems.
Application
The AM26LV32CD is a low-voltage differential line receiver primarily used in communication applications. Its key application areas include:
1. Data Communication Systems: Facilitates reliable data transmission over long distances and noisy environments by converting differential signals to TTL/CMOS levels.
2. Industrial Automation: Used in control systems to ensure robust, error-free data exchange between devices.
3. Instrumentation: Interfaces sensors and measurement devices to processing units, ensuring signal integrity.
4. Networking Equipment: Employed in routers and switches for high-speed data transfer.
5. Telecommunications: Used in modems and other telecommunication devices for signal processing.
These applications benefit from the device's high-speed performance, low power consumption, and ability to withstand electromagnetic interference.
1. Data Communication Systems: Facilitates reliable data transmission over long distances and noisy environments by converting differential signals to TTL/CMOS levels.
2. Industrial Automation: Used in control systems to ensure robust, error-free data exchange between devices.
3. Instrumentation: Interfaces sensors and measurement devices to processing units, ensuring signal integrity.
4. Networking Equipment: Employed in routers and switches for high-speed data transfer.
5. Telecommunications: Used in modems and other telecommunication devices for signal processing.
These applications benefit from the device's high-speed performance, low power consumption, and ability to withstand electromagnetic interference.
Package
The AM26LV32CD is typically available in a SOIC-16 (Small Outline Integrated Circuit) package. This package features 16 pins and is commonly used for surface mounting on printed circuit boards, offering a compact and efficient design for electronic components.
