規格
| 屬性 | 價值 |
| Supplier | Analog Devices Inc. |
| Package / Case | Tray |
| Series | iMEMS®, iSensor™ |
| Part Status | Active |
| Sensor Type | Accelerometer, Gyroscope, 6 Axis |
| Output Type | SPI |
| Operating Temperature | -40°C ~ 105°C |
| Supplier Device Package | 100-BGA Module (15x15) |
概述
Description
ADIS16505-3BMLZ is Analog Devices’ compact MEMS inertial measurement unit (IMU). It integrates a 3‑axis accelerometer and a 3‑axis gyroscope (6‑DOF) plus a temperature sensor in a sealed, rugged package. It outputs digital data over a serial interface (SPI-compatible) and includes onboard power management and factory calibration data, delivering low-noise, high-stability motion and orientation information. The -3BMLZ suffix denotes the specific packaging/revision (traceable, RoHS-compliant sealed module) used for ordering. Applications include attitude/orientation estimation, stabilization, navigation, and vibration monitoring in robotics, aerospace, and industrial systems. For exact electrical specs, data formats, calibration data, and interface details, consult the ADIS16505 datasheet and product page.
Features
ADIS16505-3BMLZ is a 6‑DOF MEMS IMU with a digital SPI interface. Key features:
- 3‑axis gyroscope + 3‑axis accelerometer (digital outputs)
- On‑chip temperature sensor for thermal compensation
- Digital SPI data interface (SCLK, SDI, SDO, CS) with data‑ready/overflow flags
- Factory‑calibrated (bias, scale factor, non‑orthogonality) per axis
- 16‑bit per axis data with units in deg/s (gyro) and g (accelerometer)
- Optional on‑chip digital filtering and health/self‑test routines
- RoHS‑compliant, hermetic package; compact form factor
- Supply voltage: 4.75–5.25 V; suitable for 5 V logic systems
- Typical low power operation and robust operation over wide temperature
- Used in industrial/robust applications requiring reliable 6‑DOF motion sensing
Note: exact operating temperature range and current draw are in the datasheet for this package variant.
- 3‑axis gyroscope + 3‑axis accelerometer (digital outputs)
- On‑chip temperature sensor for thermal compensation
- Digital SPI data interface (SCLK, SDI, SDO, CS) with data‑ready/overflow flags
- Factory‑calibrated (bias, scale factor, non‑orthogonality) per axis
- 16‑bit per axis data with units in deg/s (gyro) and g (accelerometer)
- Optional on‑chip digital filtering and health/self‑test routines
- RoHS‑compliant, hermetic package; compact form factor
- Supply voltage: 4.75–5.25 V; suitable for 5 V logic systems
- Typical low power operation and robust operation over wide temperature
- Used in industrial/robust applications requiring reliable 6‑DOF motion sensing
Note: exact operating temperature range and current draw are in the datasheet for this package variant.
Pinout
28 pins. It uses a digital SPI-like interface to read the device’s sensors and status, plus power/ground pins and control lines.
Typical functions (per package pins):
- Power/ground: VDD (and GND)
- Serial data: SCLK, SDI, SDO, CS
- Frame/interrupt: FSYNC, DRDY (data-ready), RST (reset), FAULT/INT
- Internal data: accessed via the serial registers for the 3-axis accelerometer, 3-axis gyroscope, and temperature sensor
Note: ADIS16505-3BMLZ is a RoHS lead-free 28-pin package; exact pin names may vary by revision, but SPI-like interface and power/ground pins are standard.
Typical functions (per package pins):
- Power/ground: VDD (and GND)
- Serial data: SCLK, SDI, SDO, CS
- Frame/interrupt: FSYNC, DRDY (data-ready), RST (reset), FAULT/INT
- Internal data: accessed via the serial registers for the 3-axis accelerometer, 3-axis gyroscope, and temperature sensor
Note: ADIS16505-3BMLZ is a RoHS lead-free 28-pin package; exact pin names may vary by revision, but SPI-like interface and power/ground pins are standard.
Manufacturer
Manufacturer: Analog Devices, Inc. (ADI).
Kind of company: An American multinational semiconductor company that designs, manufactures, and markets analog, mixed-signal, and digital signal processing integrated circuits, including MEMS sensors.
Kind of company: An American multinational semiconductor company that designs, manufactures, and markets analog, mixed-signal, and digital signal processing integrated circuits, including MEMS sensors.
Application
ADIS16505-3BMLZ is a compact 6‑DOF MEMS IMU (3‑axis gyro + 3‑axis accel) with digital SPI output. Typical applications:
- Attitude/heading reference for aerospace, UAVs, ships, and ground vehicles
- Inertial navigation and dead-reckoning (GPS-denied)
- Stabilization and control for gimbals, cameras, and payloads
- Robotics, automation, and motion sensing
- Industrial vibration monitoring and machine health
- Motion capture and biomechanics research
- Test and measurement instrumentation needing a small, high‑precision IMU
- Attitude/heading reference for aerospace, UAVs, ships, and ground vehicles
- Inertial navigation and dead-reckoning (GPS-denied)
- Stabilization and control for gimbals, cameras, and payloads
- Robotics, automation, and motion sensing
- Industrial vibration monitoring and machine health
- Motion capture and biomechanics research
- Test and measurement instrumentation needing a small, high‑precision IMU
Package
ADIS16505-3BMLZ uses an 8-pin LGA (leadless surface-mount) package.
