AD5220BRMZ100

AD5220BRMZ100 is Analog Devices’ dual digitally controlled potentiometer (DCP). Each device contains two end-to-end resistive elements with independently adjustable wiper taps, set via a serial interface. The wiper positions provide programmable attenuation/gain for analog signals, enabling precise, repeatable adjustments without mechanical pots.
Key points:
- Dual DCPs: two programmable potentiometers in one package.
- Serial interface: SPI-compatible (chip-select, clock, data) to select a pot and set its wiper position.
- End-to-end resistance varies by variant (common values include 10 kΩ/50 kΩ/100 kΩ); Rab is set by the specific part.
- Packaging: BRMZ indicates an 8-pin surface-mount package (RoHS-compliant) in the MSOP/SOIC family.
- Voltage and power: operates from typical 2.7–5.5 V with low power consumption.
- Applications: sensor calibration, programmable gain/attenuation, offset tuning, audio/signal conditioning.
For exact Rab, word length, timing, and pinout, consult the AD5220 datasheet for the BRMZ100 variant.

Equivalent parts depend on specs (RAB, channels, interface, voltage). The AD5220BRMZ100 is a dual I2C digital potentiometer. Possible cross-references from other vendors include:
- Analog Devices: AD5250/AD5252 (I2C digital pots)
- Microchip: MCP45xxx/MCP46xxx (I2C digital pots)
Ensure exact match for end-to-end resistance, tap count, interface, supply range, and package.

AD5220BRMZ100 is a low-power I2C digital potentiometer. Key features:
- I2C-compatible interface for wiper control
- End-to-end resistance options (e.g., 10 kΩ, 50 kΩ, 100 kΩ typical families)
- 8-bit (256-step) wiper resolution; usable in potentiometer or rheostat mode
- Volatile wiper register plus nonvolatile memory to retain position after power-down
- Multiple device addressing options for simple bus expansion
- Low quiescent current and sleep/shutdown capability
- Wide supply range (typ. 2.7 V to 5.5 V)
- Industrial temperature range (typical -40°C to +85°C)
- Small 8-pin package; RoHS-compliant
Applications include gain/offset trimming, sensor front-ends, and any digital adjustment where a programmable resistance is needed. For exact resistance options, voltage ranges, and package specifics, please consult the latest datasheet for AD5220BRMZ100.

- Pin count: 8 pins (MSOP-8/SOIC-8 package).
- Function: A single-channel 100 kΩ digital potentiometer with terminals A, B, and W; SPI-compatible serial interface (CS, SCLK, SDI) to set the wiper position; VDD/VSS for power. Used as a programmable variable resistor/attenuator.

- Manufacturer: Analog Devices, Inc. (ADI)
- Company type: An American multinational semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits.

AD5220BRMZ100 is a 100-kΩ digital potentiometer (I2C interface) used to adjust analog signals without mechanical pots. Common application areas:
- Programmable gain, offset, and attenuation in op-amp feedback networks
- Sensor conditioning and calibration (trim gains/offsets)
- ADC/DAC reference scaling and input attenuation
- Programmable attenuators/volume control in audio and RF front-ends
- Active filter tuning and adjustable RC networks
- Instrumentation and test equipment calibration networks
- Portable/low-power systems requiring reliable, space-saving resistance adjustment

An 8‑pin MSOP package (MSOP‑8), RoHS‑compliant, typically about 3×3 mm.