規格
| 屬性 | 價值 |
| Supplier | Rochester Electronics, LLC,Analog Devices Inc. |
| Package | Bulk,Tube |
| ProductStatus | Active |
| Taper | Linear |
| Configuration | Potentiometer |
| NumberofCircuits | 2 |
| NumberofTaps | 256 |
| Resistance(Ohms) | 50k |
| Interface | SPI |
| MemoryType | Volatile |
| Voltage-Supply | 2.7V ~ 5.5V |
| Tolerance | ±20% |
| TemperatureCoefficient(Typ) | 35ppm/°C |
| MountingType | Surface Mount |
| SupplierDevicePackage | 10-MSOP |
| Package/Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| OperatingTemperature | -40°C ~ 125°C |
概述
Description
AD5162BRMZ50 is Analog Devices’ 12-bit multiplying DAC (MDAC) with a buffered voltage output and a SPI-compatible serial interface. It converts a 12-bit digital input into a fraction of an external reference: Vout ≈ Vref × (Code/4095). The buffered output provides low impedance for immediate use in analog stages. The device is available in an 8‑pin MZ package (RoHS). Typical applications include programmable gain/offset, calibration, and sensor conditioning in instrumentation and industrial systems.
Equivalent
There isn’t an exact cross-reference for AD5162BRMZ50. Closest equivalents are dual 8‑bit digital pots with I2C and 50 kΩ end-to-end. Likely candidates: Analog Devices AD5252 (dual 8‑bit I2C pot; variants at 50k/100k). Other vendors’ options: Microchip MCP41/42 family (SPI) or MCP45xx family (I2C). For precise substitutes, please provide target interface (I2C/SPI) and end‑to‑end resistance. I can fetch exact cross-references.
Features
Here are the key features of the AD5162BRMZ50 (MSOP-8, I2C digital potentiometer):
- I2C-compatible digital potentiometer with 128-step wiper (7-bit resolution)
- End-to-end resistance: 100 kΩ (typical)
- Wiper register is volatile (no nonvolatile EEPROM)
- I2C interface supports standard writes/reads (up to 400 kHz)
- Supply voltage: typically 2.7 V to 5.5 V
- Low power consumption
- Temperature range: industrial (typical wide range; check datasheet for exact limits)
- Package: 8-lead MSOP (BRMZ50)
Note: for exact electrical specs (tolerances, current drive, exact temperature range) please consult the latest ADI datasheet.
- I2C-compatible digital potentiometer with 128-step wiper (7-bit resolution)
- End-to-end resistance: 100 kΩ (typical)
- Wiper register is volatile (no nonvolatile EEPROM)
- I2C interface supports standard writes/reads (up to 400 kHz)
- Supply voltage: typically 2.7 V to 5.5 V
- Low power consumption
- Temperature range: industrial (typical wide range; check datasheet for exact limits)
- Package: 8-lead MSOP (BRMZ50)
Note: for exact electrical specs (tolerances, current drive, exact temperature range) please consult the latest ADI datasheet.
Pinout
- Pin count: 8 pins (MSOP-8/8-lead small-outline package)
- Function: Single-channel I2C digital potentiometer (A–B–W terminals) used to set an adjustable resistance or programmable voltage divider in analog circuits.
- Function: Single-channel I2C digital potentiometer (A–B–W terminals) used to set an adjustable resistance or programmable voltage divider in analog circuits.
Manufacturer
Manufacturer: Analog Devices, Inc. (ADI).
About the company: Analog Devices is an American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits used across automotive, communications, consumer electronics, industrial, and other markets.
About the company: Analog Devices is an American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits used across automotive, communications, consumer electronics, industrial, and other markets.
Application
AD5162BRMZ50 is a dual, I2C‑controlled digital potentiometer (≈100 kΩ per pot). Typical applications:
- Programmable gain/attenuation in op-amp feedback and signal chains
- Adjustable voltage dividers for ADC/DAC references and sensor conditioning
- Sensor calibration and trimming (offset and gain)
- Programmable biasing/offset in instrumentation front-ends
- Audio applications (volume control, tone networks)
- Programmable RC/impedance networks for filter shaping and matching
- Test and measurement equipment for gain/attenuation banks and calibration runs
- Programmable gain/attenuation in op-amp feedback and signal chains
- Adjustable voltage dividers for ADC/DAC references and sensor conditioning
- Sensor calibration and trimming (offset and gain)
- Programmable biasing/offset in instrumentation front-ends
- Audio applications (volume control, tone networks)
- Programmable RC/impedance networks for filter shaping and matching
- Test and measurement equipment for gain/attenuation banks and calibration runs
Package
8-lead MSOP package (MSOP-8). The MZ suffix indicates a RoHS-compliant, lead-free variant.
