AMC1306M25DWVR vs AMC1300DWV

對 AMC1306M25DWVR 和 AMC1300DWV 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AMC1306M25DWVR and AMC1300DWV are both isolated delta-sigma modulator amplifiers in the same SOIC-8 (DWV) package, but they differ in input architecture and output interface. The AMC1306M25DWVR is a single-channel modulator with a ±250 mV input range and a Manchester-coded bitstream output, while the AMC1300DWV is a single-channel isolated amplifier with a ±250 mV input and a differential analog output. Because the output type and signal chain differ, the AMC1300DWV is not a direct drop-in substitute for the AMC1306M25DWVR; substitution requires validation of the downstream digital filter or ADC interface.

Output Type Validation required
Input Voltage Range High match
Package Type High match
Isolation Rating Validation required

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AMC1306M25DWVR AMC1300DWV Why it matters
Function / Type Isolated delta-sigma modulator Isolated amplifier These are fundamentally different device types; a modulator outputs a bitstream while an amplifier outputs an analog voltage, so they are not directly interchangeable.
Output Format 1-bit digital bitstream (delta-sigma) Differential analog voltage The downstream interface must match the output type; a modulator requires a digital filter/SINC stage, whereas an amplifier feeds an ADC directly.
Input Voltage Range ±250 mV ±250 mV Both target shunt-based current sensing with the same small differential input span, so signal scaling is comparable.
Isolation Rating 5000 V RMS (reinforced) 5000 V RMS (reinforced) Reinforced isolation is critical for safety and noise immunity in high-voltage current-sense applications.
Supply Voltage 3.3 V or 5 V (high side), 3.3 V or 5 V (low side) 3.3 V or 5 V (high side), 3.3 V or 5 V (low side) Matching supply rails simplifies power design and allows reuse of the same isolated supply scheme.
Package 8-pin SOIC (DWV) 8-pin SOIC (DWV) Identical package and pinout enable a drop-in footprint change on the PCB.
Operating Temperature Range -40°C to +125°C -40°C to +125°C Equivalent industrial temperature range supports the same harsh-environment applications.
Gain / Sensitivity Fixed modulator gain (bitstream density proportional to input) Fixed gain of 8 (V/V) The transfer characteristic differs; system calibration and signal-chain design must account for the different gain behavior.
Interface to Host Digital bitstream (needs SINC/filter) Analog differential output (needs ADC) The host-side circuitry differs substantially, affecting BOM and firmware requirements for substitution.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AMC1306M25DWVR AMC1300DWV
Supplier - Texas Instruments
Part Status Active Active
Type Isolated Module Isolation
Applications - Current Sensing, Power Management
Mounting Type Surface Mount Surface Mount
Number of Channels 1 -
Resolution(Bits) 16 b -
Sampling Rate(Per Second) 78k -
Data Interface CMOS, Serial -
Voltage Supply Source Analog and Digital -
Voltage - Supply 2.7V ~ 5.5V -
Operating Temperature -40°C ~ 125°C -

Frequently asked questions

What are the key architectural differences between the AMC1306M25DWVR and the AMC1300DWV?

The AMC1306M25DWVR is a single-channel, isolated delta-sigma modulator with a fixed ±250 mV input range and a Manchester-coded bitstream output. The AMC1300DWV is an isolated amplifier with a ±250 mV input range and a differential analog output. The AMC1306M25DWVR digitizes the signal internally, while the AMC1300DWV provides an analog output that must be digitized by an external ADC.

Are the AMC1306M25DWVR and AMC1300DWV pin-to-pin compatible?

No. Both devices are offered in a 5.85 mm × 7.5 mm SOIC-8 (DWV) package, but their pin functions differ. The AMC1306M25DWVR provides a clock input and a data output, whereas the AMC1300DWV provides differential analog output pins (VOUTP, VOUTN). A direct PCB drop-in replacement is not possible without layout changes.

What is the input voltage range for both devices?

Both the AMC1306M25DWVR and the AMC1300DWV are specified for a linear input range of ±250 mV, making them suitable for shunt-resistor-based current sensing in motor drive and inverter applications.

What isolation rating do the AMC1306M25DWVR and AMC1300DWV provide?

Both devices are reinforced isolated amplifiers/modulators rated for 5 kV RMS isolation per UL 1577 and provide 1.5 kV peak working voltage per VDE V 0884-11 (VDE 0884-11). They are designed for basic and reinforced isolation in high-voltage industrial systems.

How does the output interface differ between the two parts?

The AMC1306M25DWVR outputs a Manchester-coded single-bit bitstream synchronized to an external clock (typical 5 MHz to 20 MHz), which must be processed by a digital filter or FPGA. The AMC1300DWV outputs a differential analog voltage proportional to the input, which requires an external ADC and signal conditioning.

Which device is better suited for direct connection to an MCU or FPGA?

The AMC1306M25DWVR is better suited for direct digital connection because its Manchester-coded bitstream can be decoded by an FPGA or a digital filter (e.g., sinc filter) without an external ADC. The AMC1300DWV requires an external ADC and analog front-end before connecting to an MCU.

Do both devices support the same supply voltage configuration?

Yes. Both the AMC1306M25DWVR and the AMC1300DWV use a dual-supply configuration: a 3.0 V to 5.5 V high-side supply (AVDD) and a 3.0 V to 5.5 V low-side supply (DVDD), with the isolated barrier separating the two domains.

What are the typical applications for each device?

The AMC1306M25DWVR is typically used in isolated current sensing for motor drives, servo drives, and inverters where a digital bitstream is preferred. The AMC1300DWV is used in isolated current and voltage sensing where an analog output is required, such as in industrial PLCs, power supplies, and motor control systems.