AMC1300BDWVR
德州儀器
- Lifecycle
- Active
- Stock
- 1306 件
- Package
- SOIC-8
- Series
- 線性放大器-專用
對 AMC1300BDWVR 和 AMC1305M25DWR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AMC1305M25DWR and AMC1300BDWVR are both isolated delta-sigma modulators in a 16-pin SOIC package with a 5 V supply and ±50 mV input range, making them functionally related. However, the AMC1305M25DWR provides a single-ended output with an external clock input, while the AMC1300BDWVR delivers a differential output with an internal clock, so the two are not pin-for-pin or signal-chain drop-in equivalents. The AMC1300BDWVR is the more suitable candidate when a differential output and reduced external clocking are required, whereas the AMC1305M25DWR should be selected when a single-ended output and externally synchronized clocking are needed. Designers must validate output interface, clocking scheme, and isolation ratings against the target system before substitution.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AMC1305M25DWR | AMC1300BDWVR | Why it matters |
|---|---|---|---|
| Input Type | Current shunt (isolated delta-sigma modulator) | Voltage input (isolated amplifier) | Determines whether the device measures current via a shunt or amplifies a voltage signal; these are not functionally interchangeable. |
| Output Type | 1-bit digital bitstream (delta-sigma) | Analog differential output | A digital bitstream requires an external digital filter/decoder, while an analog output feeds an ADC directly; the downstream signal chain differs fundamentally. |
| Isolation Rating | 5000 V RMS (reinforced) | 5000 V RMS (reinforced) | Both provide reinforced isolation suitable for high-voltage sensing, so isolation capability is comparable. |
| Input Voltage Range | ±250 mV (shunt input) | ±250 mV (linear input range) | Defines the maximum differential signal each device can accept before clipping or saturating. |
| Supply Voltage | 3.3 V (high side) / 3.3 V or 5 V (low side) | 3.3 V to 5.5 V (both sides) | Affects power supply design and compatibility with the surrounding logic and analog circuitry. |
| Package | SOIC-16 (wide body) | SOIC-8 (wide body) | Different footprints and pin counts prevent direct board-level drop-in replacement. |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | Both support industrial temperature ranges, so thermal suitability is equivalent. |
| Gain / Sensitivity | Fixed modulator gain (bitstream density proportional to input) | Fixed gain of 8.2 V/V | The transfer characteristic differs; the modulator encodes input as bitstream density while the amplifier provides a fixed analog gain. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AMC1300BDWVR | AMC1305M25DWR |
|---|---|---|
| Part Status | Active | Active |
| Type | Isolation | Isolated Module |
| Applications | Current Sensing, Power Management | - |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | - | 78k |
| Data Interface | - | CMOS, Serial |
| Voltage Supply Source | - | Analog and Digital |
| Voltage - Supply | - | 3V ~ 5.5V |
| Operating Temperature | - | -40°C ~ 125°C |
The AMC1305M25DWR is a reinforced isolated delta-sigma modulator with a ±250-mV input range and a 20-MHz clock, designed for shunt-based current sensing with direct digital output. The AMC1300BDWVR is a reinforced isolated amplifier with a ±250-mV input range and a fixed gain of 8.2, providing a differential analog output. The key difference is the output type: the AMC1305M25DWR delivers a 1-bit delta-sigma bitstream, while the AMC1300BDWVR delivers an analog voltage proportional to the input.
No. Both devices are offered in a 16-pin SOIC (DW) package, but their pin functions differ. The AMC1305M25DWR provides a clock input and a data output for the delta-sigma bitstream, whereas the AMC1300BDWVR provides differential analog output pins (VOUTP, VOUTN). Therefore, they cannot be used as direct drop-in replacements without circuit and layout changes.
Yes. Both the AMC1305M25DWR and the AMC1300BDWVR are reinforced isolated devices rated for 5000-VRMS isolation per UL 1577, and both are offered in a 16-pin SOIC package with a wide-body construction suitable for high-voltage isolation applications.
Both the AMC1305M25DWR and the AMC1300BDWVR specify an input voltage range of ±250 mV, making them suitable for low-side shunt resistor current sensing in motor drive and inverter applications.
The AMC1305M25DWR outputs a 1-bit delta-sigma modulated bitstream that requires an external digital filter or a microcontroller with a suitable sinc filter to reconstruct the signal. The AMC1300BDWVR outputs a differential analog voltage with a fixed gain of 8.2, which can be directly connected to an ADC or analog control loop without digital filtering.
The AMC1305M25DWR is the appropriate choice when the system already includes a delta-sigma demodulation/filter path, such as a microcontroller with a sigma-delta filter module or an external digital filter, because it provides a direct digital bitstream output. The AMC1300BDWVR would instead require an ADC to digitize its analog output.
No. Replacing the AMC1305M25DWR with the AMC1300BDWVR changes the signal chain from a digital bitstream to an analog output, requiring removal of the digital filter/demodulation stage and addition of an ADC, along with PCB and firmware modifications. The reverse replacement likewise requires adding a digital filter path. Neither substitution is transparent to the system design.
Both the AMC1305M25DWR and the AMC1300BDWVR are used for isolated current and voltage sensing in industrial motor drives, inverters, solar inverters, energy storage systems, and battery management systems, where reinforced isolation and ±250-mV input range are required for shunt-based measurement.