AM26LS32ACDR
德州儀器
- Lifecycle
- Active
- Stock
- 2449 件
- Package
- SOIC-16
- Series
- 介面-驅動器、接收器、收發器
對 AM26LS32ACDR 和 AM26LS31CDE4 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AM26LS32ACDR and AM26LS31CDE4 are not functionally interchangeable: the AM26LS32ACDR is a quad differential line receiver, while the AM26LS31CDE4 is a quad differential line driver. Their signal direction, I/O architecture, and electrical roles are fundamentally different, so one cannot directly substitute for the other in a given circuit position.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AM26LS32ACDR | AM26LS31CDE4 | Why it matters |
|---|---|---|---|
| Function | Quadruple differential line receiver | Quadruple differential line driver | A receiver and a driver serve opposite roles in a differential link; they are not directly interchangeable in the same socket. |
| Number of Drivers/Receivers | 0 drivers / 4 receivers | 4 drivers / 0 receivers | Determines the direction of signal flow and whether the device can transmit or receive on a differential bus. |
| Output Type | Tri-state differential outputs (receiver outputs) | Tri-state differential line driver outputs | Output structure affects bus sharing, loading, and how the device interfaces with the transmission line. |
| Input Type | Differential line receiver inputs | TTL-compatible single-ended driver inputs | The input interface must match the upstream signal source; receivers accept differential pairs while drivers accept logic-level signals. |
| Supply Voltage (Vcc) | 5 V nominal | 5 V nominal | Both operate from a 5 V supply, so power rail compatibility is maintained across the pair. |
| Package / Mounting | SOIC-16, surface mount | SOIC-16, surface mount | Matching package and footprint allows either device to be placed on the same board layout. |
| Operating Temperature Range | 0°C to 70°C | 0°C to 70°C | Identical commercial temperature ratings mean both suit the same ambient operating environments. |
| Standard Compliance | Meets RS-422, RS-423, and RS-485 receiver requirements | Meets RS-422 and RS-423 driver requirements | Standards compliance defines which serial interface protocols the device can legally and reliably support. |
| Data Rate Capability | Up to 10 Mbps (typical) | Up to 10 Mbps (typical) | Similar maximum data rates indicate comparable throughput for high-speed differential signaling applications. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AM26LS32ACDR | AM26LS31CDE4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Type | Receiver | Driver |
| Protocol | RS422, RS423 | RS422, RS485 |
| Number of Drivers/Receivers | 0/4 | 4/0 |
| Voltage - Supply | 4.75V ~ 5.25V | 4.75V ~ 5.25V |
| Operating Temperature | 0°C ~ 70°C | 0°C ~ 70°C |
| Mounting Type | Surface Mount | Surface Mount |
| Receiver Hysteresis | 50 mV | - |
The AM26LS32ACDR is a quad differential line receiver, while the AM26LS31CDE4 is a quad differential line driver. The receiver is designed to convert balanced differential input signals into TTL-compatible outputs, whereas the driver converts TTL inputs into balanced differential outputs compliant with RS-422 and RS-485 signaling standards.
No. Although both devices are offered in a 16-pin SOIC package (the "D" suffix on the AM26LS32ACDR and the "D" package on the AM26LS31CDE4), their pin functions differ. The AM26LS32ACDR provides receiver inputs, receiver outputs, and an enable pin, while the AM26LS31CDE4 provides driver inputs, differential outputs, and an enable pin. They cannot be substituted for one another without redesigning the circuit.
Both devices operate from a single 5 V nominal supply. The AM26LS32ACDR is specified for a 5 V supply with a typical operating range of 4.75 V to 5.25 V, and the AM26LS31CDE4 is likewise specified for 5 V operation. Both are members of the AM26LS31/AM26LS32 family of 5 V RS-422/RS-485 interface devices.
Yes, both are designed for balanced differential signaling consistent with the RS-422 and RS-485 standards. The AM26LS31CDE4 driver produces differential outputs meeting RS-422 requirements, and the AM26LS32ACDR receiver accepts differential inputs with the common-mode range and sensitivity specified for these standards. They are commonly used together as a driver/receiver pair on the same bus.
Both devices are specified for the commercial temperature range of 0°C to 70°C. The "C" in the AM26LS31CDE4 suffix and the "AC" grade of the AM26LS32ACDR denote commercial-temperature versions of these interface ICs.
Yes. Because one is a quad receiver and the other is a quad driver, they are complementary and are frequently paired to form the receive and transmit sides of an RS-422 or RS-485 interface. A typical arrangement uses the AM26LS31CDE4 to drive the differential bus and the AM26LS32ACDR to receive differential signals from the bus, with each device's enable pins used to control transmit and receive activity.
Both the AM26LS32ACDR and the AM26LS31CDE4 are supplied in a 16-pin SOIC (small-outline integrated circuit) package. The "E4" suffix on the AM26LS31CDE4 denotes a lead-free (RoHS-compliant) finish, and the AM26LS32ACDR is likewise offered in RoHS-compliant packaging per the manufacturer's ordering information. Designers should confirm the specific orderable part number's compliance status against the current manufacturer datasheet.